Find professional pool maintenance in NSW

My pool pump is tripping the switch when turned on. It has its own dedicated power slot in a shed. I have tried to connect it to another slot inside the house (using a long extension), and it tripped the switch again. I cleaned the pump to ensure it’s not blocked, but still no luck. The pump runs for about 1 minute before tripping the switch. Sometimes shorter though. Need someone to look into it asap.

Pool chlorinator seems clogged with some white residue. this is stopping the pump from circulating - will need cleaned & then bring pool back to blue/swimmable before Easter. Pool is still very clean - just a little cloudy. Needs tiny basic clean.

My pool filter is leaking and needs repair

Chlorinator drains of water when pump turned off and providing inadequate suction. Swimming pool valve (pictured in photo) - which drains from the skimmers - is presumably letting in air as it is leaking, hence needs replacement or maybe new seal. Good access.

Moved into a new home and can’t figure out how to get the spa turned on.

Waterfall pump not working

My Multiform branded spa bath is not reponding to the button. Please help get it fixed.

Fix / repair small abrasions on the surface of the pool

My pool pump has stopped working. Based on the hum it is likely the capacitor. Need someone who is qualified to do electrical work to diagnose and repair the issue.

The pool water has turned green. I need the water cleaned and filtration tank replaced. Pool size is 7mx5mx1.5m.

I need my pool filter to be replaced with a new glass media system. I can play for the filter and parts separately or acquire it separately or the whole lot replaced and installed. $15 to get the bid going.

I’m looking for an experienced pool technician to: Replace the broken handle (or multiport top, if required) on my sand/media filter. Filter: Fluidra CA 280 Media Filter (40mm) Valve: 40mm multiport for CA filter – top mount MPV Give the pool a full clean (surface and bottom debris removed, walls/steps cleaned, baskets emptied, etc.). Test the water and bring the chemicals into balance (pH, alkalinity, chlorine and other key levels). Easy access down the side of the house to the equipment area. Please include labour and an estimate for any parts and chemicals in your offer (or note if parts/chems are additional).

Noticed the pool pump is not working after coming back from holiday. Need an experienced technician to have a look, troubleshoot and fix the issue for us.

Pool pump humming but not starting – likely capacitor Pool pump: Waterco Supatuf 1.0HP MK2 Pump powers on but only hums, does not spin and no water flow. Pump lid is seized and cannot be opened by hand. Suspect failed start capacitor or seized impeller (possibly after running dry). Looking for a technician who can: – Safely open the pump lid – Check if impeller spins freely – Test and replace start capacitor if required – Re-prime system Please advise availability, experience with pool pumps, and call-out cost.

Looking for an experienced pool technician to inspect and service a residential pool. Scope of work includes: - General diagnostic inspection of the pool and equipment. - Skimmer basket is stuck and needs to be removed and replaced. - Balance pool chemicals once work is completed. Chemicals will be supplied. Please advise what’s included in your quote.

There's a leak on the pool pump and hence pump seal keeps getting lost. Need someone to fix the pump so can use Pool pump for party on the weekend.

Actual price can also be discussed when you assess the issue . My pool has two motors. One of them sucks down, and one of them pushes up in terms of leaves and debris in the pool. At present one of the motors that sucks down I believe has stopped working . I need a pool specialist to come and assess the issue and get a solution .

The pool equipment is currently housed by a brick wall structure. The existing top wooden cover has rotted and needs to be replaced with a similar protective cover to restore its function. The new cover should: Sit on top of the structure (approx. 1.2m x 1.2m and 350mm high) Allow access to pool equipment Protect equipment from rain Be constructed from wood or metal, consistent with the original purpose. This is a repair/replacement of a damaged cover, not a redesign or upgrade.

I am looking for a pool repair person to come and provide a quote to repair the concrete pool as it is peeling in some parts of the pool . The pool is approx 4metre by 8pm. Refer to the pictures

Needing to remove and replace pool chlorinator.