A professional helping with water heater installation and repair.
A professional helping with water heater installation and repair.

Find a professional hot water system contractor in North East Melbourne

Fill in a short form and get free quotes for local hot water system contractors in North East Melbourne

4.2

Great rating - 4.2/5 (11114+ reviews)

Looking for hot water system contractors?

  • Gas system
  • Electric systems
  • Boilers
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated hot water system installers near me

Recent Hot Water System Installation & Repair reviews in North East Melbourne

He done really good job👍

Hot water continues coming from solar panels

$100

Professional and timely. Will use again :)

Hot Water heater new overpressure relief valve installed

$150

Excellent work. Many thanks for the prompt, friendly and outstanding service. The issue with the hot water system was resolved quickly and for a reasonable and affordable fair price too. Highly recommended. Wish you all the best.

Disable hot water system

$300

On time Professional Definitely recommend

Hot water not hot

$100

Erick was terrific - great communication, punctual, polite and completed the job in good time. Offered and was able to complete the job on the same day, with short notice. Very happy with his knowledge, skills and service and would have him back for another job if needed.

My Delonghi dishwasher needs a service - seems to be no hot water

$100

Stephen was able to move the hot water unit for me without any issues. He is very friendly and reliable. Will definitely be using him again. And thanks for the chat! 🙂

Move hot water unit 1.5kms

$50

What's the average cost of a hot water system installer in North East Melbourne

$107 - $263

low

$107

median

$182

high

$263

Low, median and high bar chart distribuiton

Average reviews for Hot Water System Installation & Repair Services in North East Melbourne

based on 81 reviews

4.89

76
3
1
0
1

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

100+

Tasks successfully completed

3

Average amount of offers per task

5

 mins

Average time to receive offers

Statistics from the most recent tasks on Airtasker over the last 4 years.

What do hot water system installation services include?

Hot water system installation services include all the activities necessary to put a reliable, safe hot water system in your home. This involves installing an unvented hot water system, inspecting the installation area, preparing materials, installing the cylinder or tank, then making the needed connections. After the installation, your plumber can test the system for flaws and address them as needed.

Inspecting installation area

Your water heater installation begins with a thorough inspection of the spot that will house the tank and its components. Your plumber makes sure that the floor is robust enough to support the cylinder's weight and complies with established building codes and safety rules and regulations. If the allotted space is deemed insufficient for the cylinder, your plumber can help you look for an alternative spot for the unvented cylinder service. 

Preparing for installation 

Your plumber makes the necessary preparations for the hot water cylinder installation. If necessary, some plumbers may offer to make an improvised platform of sturdy materials to support the tank's weight. Otherwise, you can hire a Tasker to handle all your carpentry needs.

When appropriate, your hired plumber shuts off the power, gas, and water supply before starting the job. They can take all the necessary measurements to determine the right amount of materials, then cuts and bends wires and pipes to the appropriate lengths and widths. Your plumber may also cut holes into walls or floors as needed to allow pipes or wires to run through.

Installing the cylinder

Once the cylinder's space is ready, your plumber can proceed with the unvented hot water cylinder installation. They can place the cylinder or tank onto its designated space and position. Your plumber takes care not to damage any of the components of the vented hot water cylinder or other pipes and wires in its surroundings.

Installing components and pipes

After the cylinder is in position, your specialist proceeds with attaching the appropriate pipes, wires and components like the Temperature and Pressure Release valve, expansion vessel, immersion heater, and any other pipes and valves. As with all other stages of the unvented cylinder installation, they use appropriate materials and techniques that are compliant with state safety and building regulations and industry best practices. 

Testing the system

Your hired plumber tests the system after completing the installation. They check that each tap and shower head provides hot water on demand and flows with consistent pressure. Should variations in temperature or pressure arise, your plumber can troubleshoot the system and do the appropriate fixes. 

They repeat this process until the hot water system works without any issues. And now that your home has hot water running through your taps, tubs, and showers, why not ensure greater warmth and comfort in every room of your home? On Airtasker, you can also hire an insulation installer who can help you cut down on bills and achieve year-round comfort.

Recent Hot Water System Installation & Repair tasks in North East Melbourne

Temporary shift of gas hot water heater

$10

Eltham VIC, Australia

14th May 2026

We are having our gas hot water heater replaced with electric, but before that is done, we need to repair the wall behind the current gas unit while there is an opportunity. The problem is that the current gas unit is against the wall which doesn't allow access. To keep the hot water flowing, we need to temporarily relocated the unit away from the wall (as much as we can) for a few days before the unit is removed entirely.

Hot water valve replace

$150

Epping VIC 3076, Australia

12th May 2026

My hot water valve is leaking, looking someone to fix this.

URGENT - Plumber TODAY – Leaking Hot Water Shower Tap

$450

Epping VIC 3076, Australia

10th May 2026

Hi, Need a plumber TODAY to diagnose and fix a leaking hot water tap in the upstairs shower. Details: • Hot water tap drips from the bottom even when fully closed. • I’ve removed the cover — leak is coming from the bottom of the tap. • Water is coming through to the laundry ceiling and wall directly below. Likely cartridge, tap body or pipe behind the wall. Need it sorted ASAP before more damage. Happy for you to come out, inspect on site, and give a firm quote before starting any work. Photos attached: tap with cover off + laundry damage. Today only – emergency call-out rate is fine. Let me know your earliest time. Thanks!

Fast response and came on time.

Removal of Hot Water System

$150

Lower Plenty VIC 3093, Australia

4th May 2026

Hi Taskers, I'm in the process of replacing my hot water system and I'd like to have the old gravity fed (130L) electrical unit removed from the roof. It's an old gravity fed electrical unit that will be drained and decommissioned. This task would be needed in early - late June. Pic attached of the unit to be removed. Thanks

Need help with progressive mixer tap – strong hot water flow

$10

Reservoir VIC, Australia

30th Apr 2026

Hi, I need someone experienced with progressive mixer taps to check my wall-mounted bathroom basin tap. The issue is that when I turn the mixer towards hot water, the water flow becomes very strong and the temperature gets very hot quickly. It is difficult to control the hot water safely and accurately, and the basin fills up very fast during normal use. I am renting, so I am looking for someone who can check if there is a practical solution without replacing the whole tap/mixer, if possible. Please let me know if you have experience with this type of progressive mixer and if you can help diagnose or adjust the issue.

He’s Professional and respectful

Hot water unit removed and replaced Epping

$200

Epping VIC, Australia

19th Apr 2026

Remove old water tank n replace with new hot water system

Hot water pipe leaking

$500

Greensborough VIC, Australia

16th Apr 2026

Hot water pipe from the hot water system leaking. Urgent!!!

Install natural gas hot water heater

$300

Donnybrook VIC 3064, Australia

14th Apr 2026

My natural gas hot water heater is not working. We bought a new one and want plumber to install it.

Gas hot water can't light up

$150

Bundoora VIC, Australia

9th Apr 2026

I turned gas off for a few days, couldn't turn back on the gas hot water system.

Fix small leak at hot water meter compression fitting

$150

Ivanhoe VIC, Australia

4th Apr 2026

I have a minor water leak at my hot water meter. The leak appears to be coming from the compression/union nut directly below the meter (downstream of the isolation valve). A plumber previously applied thread tape, which stopped the leak temporarily, but it has returned. I suspect the olive or fitting needs replacing/reseating. Scope: Inspect leaking compression fitting Reseal / replace olive or fitting as required Ensure no leaks under pressure Notes: Easy access in meter box Small slow drip only Photos attached Must be licensed plumber

Thanks for your help Ben

Plumber to install hot water system

$300

Lalor VIC 3075, Australia

27th Mar 2026

There is an old 1970’s granny flat that has been un used for years. We need a new hot water system installed in the position of the new hot water system, a new toilet cistern replaced, new tap ware installed on shower and I need the gas valve to the old oven replaced. I have attached the pics of the hot water system I wanted installed. I will pay for the hot water system

Repair leak on chromagen hot water system

$150

Wollert VIC 3750, Australia

17th Mar 2026

Leak on hot water system at water tank joint. Midea Chromagen system.

Brilliant and easy tradie to deal with. Prompt with replies and got job done. Highly recommended

Hot water system repair

$200

Greensborough VIC, Australia

5th Mar 2026

We have a house in Greensborough that recently had a gas safety inspection. The inspection company advised that there are two issues with the hot water system that require rectification. Please see the attached photos for reference. The repair must be carried out by a licensed plumber. After the work is completed, we will require the following: • A copy of the plumber’s licence • Photos after the repair is completed • A formal invoice for the work

Replace a gas hot water system. Removing an older 85L with a 135L unit

$200

Reservoir VIC, Australia

28th Feb 2026

Replace an existing gas hot water system that is 85 L in size with a 135 L unit. In the same location the house is a two bedroom unit on the ground floor. Easy access to the unit.

Fix leak in Gas hot water system

$100

Epping VIC, Australia

28th Feb 2026

Fix a leak in my gas water heater. Refer pictures. The water is leaking from the blue knob.

Replace existing Continuous hot water unit

$10

Bundoora VIC, Australia

16th Feb 2026

Replace my existing Chromagen T20 gas continuous hot water unit to a Rinnai 32 gas continuous hot water unit with controller

PLumber request to check gas and hot water supply

$100

Heidelberg Heights VIC 3081, Australia

10th Feb 2026

Gas and hot water supply not working in the house. Need a plumber to check. Picture of knob attached

Need to look at the solar hot water service panel on the roof.

$150

Mernda VIC, Australia

4th Feb 2026

I notice the solar hot water service panel on the roof looks like wires are coming out on the side or broken.

Gas hot water system, pilot keeps going off

$300

Bundoora VIC, Australia

25th Jan 2026

I can turn the pilot light on, but as soon as you release it turns off

Water pump/hot water system issue

$130

Mernda VIC 3754, Australia

3rd Jan 2026

water pump making noise when flushing toilet and water stopped, also minor noise of using water in the kitchen when turn water tap off. The current hot water or storage tank also making minor noise like plenty of small hailstones are falling .