A professional helping with water heater installation and repair.
A professional helping with water heater installation and repair.

Find a professional hot water system contractor in Gold Coast

Fill in a short form and get free quotes for local hot water system contractors in Gold Coast

4.3

Excellent rating - 4.3/5 (10900+ reviews)

Looking for hot water system contractors?

  • Gas system
  • Electric systems
  • Boilers
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated hot water system installers near me

Recent Hot Water System Installation & Repair reviews in Gold Coast

Great service!!!

Not hot water in showers

$200

Excellent service, highly recommend Dean. Prompt, friendly and did a great job.

Replace 50L hot water system

$1,000

Kind and courteous human being with excellent communication and prompt service. Highly recommended. Thank you Carl.

Toilet leaking inside cistern and hot water not col

$100

AMAZING service! 10/10 Definitely use again

Plumber for a little leak in copper pipe hot water system

$100

Prompt and knowledgeable

Seeking licensed plumber to assist capping hot water from ceiling

$100

Prompt, professional, clean, knowledgeable. I can have a hot shower now!!! Thanks Tien. Highly recommended.

Supply & Replace heater element - Dux ProFlo 315S136 Hot Water System

$250

What's the average cost of a hot water system installer in Gold Coast

$111 - $322

low

$111

median

$167

high

$322

Low, median and high bar chart distribuiton

Average reviews for Hot Water System Installation & Repair Services in Gold Coast

based on 55 reviews

4.91

53
0
1
1
0

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

59+

Tasks successfully completed

2

Average amount of offers per task

19

 mins

Average time to receive offers

Statistics from the most recent tasks on Airtasker over the last 4 years.

What do hot water system installation services include?

Hot water system installation services include all the activities necessary to put a reliable, safe hot water system in your home. This involves installing an unvented hot water system, inspecting the installation area, preparing materials, installing the cylinder or tank, then making the needed connections. After the installation, your plumber can test the system for flaws and address them as needed.

Inspecting installation area

Your water heater installation begins with a thorough inspection of the spot that will house the tank and its components. Your plumber makes sure that the floor is robust enough to support the cylinder's weight and complies with established building codes and safety rules and regulations. If the allotted space is deemed insufficient for the cylinder, your plumber can help you look for an alternative spot for the unvented cylinder service. 

Preparing for installation 

Your plumber makes the necessary preparations for the hot water cylinder installation. If necessary, some plumbers may offer to make an improvised platform of sturdy materials to support the tank's weight. Otherwise, you can hire a Tasker to handle all your carpentry needs.

When appropriate, your hired plumber shuts off the power, gas, and water supply before starting the job. They can take all the necessary measurements to determine the right amount of materials, then cuts and bends wires and pipes to the appropriate lengths and widths. Your plumber may also cut holes into walls or floors as needed to allow pipes or wires to run through.

Installing the cylinder

Once the cylinder's space is ready, your plumber can proceed with the unvented hot water cylinder installation. They can place the cylinder or tank onto its designated space and position. Your plumber takes care not to damage any of the components of the vented hot water cylinder or other pipes and wires in its surroundings.

Installing components and pipes

After the cylinder is in position, your specialist proceeds with attaching the appropriate pipes, wires and components like the Temperature and Pressure Release valve, expansion vessel, immersion heater, and any other pipes and valves. As with all other stages of the unvented cylinder installation, they use appropriate materials and techniques that are compliant with state safety and building regulations and industry best practices. 

Testing the system

Your hired plumber tests the system after completing the installation. They check that each tap and shower head provides hot water on demand and flows with consistent pressure. Should variations in temperature or pressure arise, your plumber can troubleshoot the system and do the appropriate fixes. 

They repeat this process until the hot water system works without any issues. And now that your home has hot water running through your taps, tubs, and showers, why not ensure greater warmth and comfort in every room of your home? On Airtasker, you can also hire an insulation installer who can help you cut down on bills and achieve year-round comfort.

Recent Hot Water System Installation & Repair tasks in Gold Coast

Fix leaking hot water system

$100

Burleigh Waters QLD, Australia

8th Oct 2025

We have a leaking hot water system. We believe the source is from the solder joint from the cold water side, and we need a plumber to fix this.

Hot water system install

$450

Labrador QLD 4215, Australia

26th Sep 2025

remove old hot water system and install new system

Disconnect hot water and reinstall new hot water system

$5

Surfers Paradise QLD 4217, Australia

23rd Sep 2025

Apartment location 1) disconnect current hot water system which is in the kitchen (electrical component already disconnected) 2) reinstall a new hot water system in the bathroom - both locations share a common wall - I’m open to hot water tank (increased size to 160-250l) or an electrical instantaneous set up if set up permits

Fix hot water cylinder

$5

Palm Beach QLD, Australia

21st Sep 2025

Hot water cylinder not working, reset button fine, adjusted valve and checked switchboard

Hot water tank replacement 250L

$1,000

Robina QLD, Australia

18th Sep 2025

Must be licensed. Rheem 250L hot water tank no longer working. Unit is about 12 yrs old so probably due for replacement. Open to you sourcing tank, or I can have tank delivered and you just do the change out old to new. Please make clear in your quote if it is with or without tank and if so the tank brand. Current tank has no tempering valve. Over flow goes outside to pipe coming out wall. Existing unit is in garage on a pallet which is on a concrete floor.

Add timer on my electric hot water heater

$150

Runaway Bay QLD 4216, Australia

5th Sep 2025

1. Reconnect my hot water system from the Controlled Load (CL) circuit to the general/main circuit. 2. Supply and install a hot water timer 3. Provide a Certificate of Compliance for the work.

Ben is really helpful ,professional, efficient, and explained everything clearly. The installation was neat and works perfectly. Highly recommended!

Replace rusted sink hose and repair leaky hot water tap

$100

Arundel QLD 4214, Australia

26th Aug 2025

Hot water tap on laundry is leaking out of rear of tap when turned on Rusting stainless hose under kitchen sink needs replacing

A+++++ will book again

Seeking plumber to flush electric 125L Aqua Max hot water tank

$100

Surfers Paradise QLD 4217, Australia

5th Aug 2025

Seeking plumber to flush Aqua Max electric hot water tank & inspect elements/thermostat. Hot water running out quickly.

Fast service, great communication

Relocation of Hot Water System

$200

Currumbin Waters QLD, Australia

20th Jul 2025

We are removing this alcove, and therefore need to relocate the hot water system on the wall.

Install electric hot water cylinder

$150

Ormeau QLD 4208, Australia

17th Jul 2025

Need my 125litre hot water cylinder swapped out with a new 250 litre cylinder in ormeau. I have the new cylinder already.

Need a plumber to inspect my new hot water tank

$100

Southport QLD, Australia

11th Jul 2025

I have installed a new hot water tank but not getting the same intensity and force if hot water need a plumber to come and inspect this today

Excellent t service

Install Gas Hot Water System on 2024 Hardkorr Xplorer Camper Trailer

$1,000

Pimpama QLD, Australia

11th Jul 2025

💧 Install Gas Hot Water System on 2024 Hardkorr Xplorer Camper Trailer Description: Looking for a licensed gas fitter or qualified tradesperson to install a gas hot water system on my 2024 Hardkorr Xplorer 2.2 camper trailer, currently housed in Pimpama (Gold Coast). I can transport the trailer locally if required. I'm considering installing a gas-only hot water system (e.g. Truma UltraRapid), but I haven’t purchased the unit yet. Open to recommendations on the most practical and compliant solution for this style of camper setup. Scope of Work Includes: Installation of a gas-only hot water system (unit not yet purchased – advice welcome) Connection to the kitchen sink and/or external shower outlet Gas connection (using existing bayonet or installing new, depending on your recommendation) Secure mounting of unit (preferred location: driver’s side near the kitchen setup – see photo) All work must comply with QLD gas and plumbing safety regulations System testing and brief walk-through on operation upon completion Photo Provided: The attached image shows the driver’s side storage and kitchen area, where I’m hoping to have the system mounted. Open to your advice on the best location for both function and compliance. Requirements: Must be a licensed gas fitter (required for compliance and certification) Experience with camper trailer or caravan installs preferred Must provide tax invoice and Gas System Compliance Certificate Own tools and equipment Flexible with timing – ideally completed in the next 2–3 weeks Budget: Open to fair and reasonable offers – please include all labour, materials (if supplying), travel, and compliance in your quote. Happy to supply more photos or answer any questions. Thanks!

Check my hot water system - there is barely any coming out

$100

Tugun QLD 4224, Australia

4th Jul 2025

Our hot water system seems to not be working at all and barely any hot water is coming out

I can’t thank Angie’s partner enough for the incredible job done on our hot water system. What started as a simple check-up turned into a full replacement — all on a Friday evening! It was a big job, but it was handled with absolute professionalism and care. Everything was executed perfectly, and the quality of work was outstanding. So grateful for the quick response and top-notch service. Highly recommend!

Fix leak from hot water tank; check taps needing new washers

$100

Australia Fair, QLD

30th Jun 2025

Hot water tank leaking Check taps

Remove temperature regulator from hot water cylinder

$200

Tugun QLD, Australia

25th Jun 2025

Had a new hot water cylinder installed last week, replacing an old one which didn't have the regulator. We have a very old house with very tiny pipes which means absolutely no water pressure for showers and it's a disaster. Need the regulator removed so its just cold water in and hot (75 degrees) water out to the house. Need complete asap.

Great guy, fast, prompt and complete professionally.

Need to move a hot water taken from inside a apartment to out side

$350

Surfers Paradise QLD, Australia

14th Jun 2025

I need to get a hot water tank moved on this bottom level apartment from inside the bathroom and we need to reposition it on the opposite side of the wall so we can have a full vanity where the hot water tank used to be in this ground level apartment

Hot Water System electrical problem

$500

Coombabah QLD, Australia

12th Jun 2025

No hot water since Monday night. Switch in Mains Box on, but has tripped a couple of times. Hot Water System not leaking so a plumber has decided it must be electrical. Faulty heating element?Thermostat? Faulty main box switch? No idea just need a quote to give me a rough idea. Pensioner discount if available please!

No hot water. Bryce was great, through his investigation he discovered that the HWS was fine and that the problem was a faulty meter box. He was friendly, professional and courteous. I wouldn't hesitate to call on him for all future electrical work. I would recommend him to anyone needing a good electrician. Thanks Bryce!

Help with Electric Instant Hot Water Unit

$80

Coolangatta QLD, Australia

10th Jun 2025

We have a Stiebel Eltron Electronic comfort hot water service. It can take up to five minutes to get hot, then if you turn it off, it immediately goes cold again and can take the same amount of time to heat up. Not sure if we need a plumber or an electrician to diagnose and fix the issue.

Plumber, move the hot water system

$300

Surfers Paradise QLD 4217, Australia

31st May 2025

Looking for a plumber or experienced handyman who can disconnect/remove a hot water system, adjust pipework, and install a bathroom vanity (already purchased). Open to quotes – budget is flexible depending on experience

Free hot water tank for parts or scrap

$5

Robina QLD 4226, Australia

20th May 2025

Free, parts or scrap. Take away.

Job done really well