Find a professional gyprocker contractor in Inner West Sydney

Patch Gyprocker rectangle 1m x .6m Please look at photos The cutout is there. You will be required to put support behind to secure cutout. You will need to plaster. I can sand given the time to dry.

My electrician has to move the rangehood to the front of the box. I need help with patching the hole it will leave.

Hi, I need my new tv mounted to the loungeroom wall with cables concealed - I have the mounting bracket already - just need it mounted correctly and not for an ridiculously inflated price please.

Trying to finish the small elements of the house before we break for Xmas. Had new windows replaced and as a result some of the wall needs to be re-Gyprocked then it will need to be patched and then painted. some rooms have only small amount of patching required so I can probably use filler. In the other rooms, need more extensive Gyprock. keen to get this completed this weekend if we can and opportunity toquote on bigger painting job which includes the front of our house and the sides of our house

Bathroom renovation, need ceiling edges repaired as cornices have been removed.

Looking for someone to hang a framed artwork onto our gyprock wall

Repair or replace ceiling Gyprock in 1 room approx 3.8x3.8

Need ledge repaired and painted. White Polar paint supplied.

Need a section of a Gyprock ceiling cut out and replaced due to water damage. Also needs to be set. Approximately 400mm x 400mm

Had some work done by couple of guys and a part of it needs to be redone. There is a aircon return that needed to be included as part of a new ceiling, they built a wooden box to accommodate it. But it’s been orientated the wrong way. Gyprock sheet needs to come down (likely replaced with new). Gyprock installed into a rondo system. You can see in one photo the highlighted screws that go into the existing framework, and in the other photo I’ve drawn in what should be the correct orientation. It can’t fit with cornice that’s going in. The box to be reoriented would be a simple move for a carpenter. Return doesn’t need to be installed now, just ready for later after painting. Only decent /experienced carpenters with gyprock experience reply please.

Hole in Gyprock wall needs patched and sanded - ready to paint.

1. Smash out gyprock above door 2. Re gyprock after work done 3. Sand Third photo is what it looks like under. We need to smash it open again for some wood and door fixing.

Need gyprock for ceiling in bathroom. 165cm x 180cm (3m2) and extra little 30cmx30cm hole patched up too thank you. Much appreciated if this can be done before December. Images attached

I need a gyprock wall repaired after a skylight leaked. No painting required. The damage is 90cm at its length and 59 cm at its width.

Gyprocker required to finish off wall approx 3.4m x2.4m and install cornice.

Gyprock has sagged/fallen in ceiling of garage. Needs to be repaired. Does not need to be painted.

Need a qualified plasterer to: Supply and install (1.7m x 0.7m) section of 15mm gyprock ceiling board (from previous aircon access). Tape, set and sand smooth (ready for paint, but painting not required). Build/install small manhole (example photo attached) with access panel for future aircon servicing. Ceiling height is standard and easy ladder access. Please include materials in your quotes. Photos attached.

I have 2x 85 inch TV's and a 65 inch TV to be mounted in 3 gyprock walls

Gyprock / Dry wall fix ceiling, see photos, approx 1.5m x 1.5m

I put my foot through the Gyprock next to the manhole. Needs to be repaired and set ready for painting.