Find a professional gate installation in Sydney

Install 2x 1.8m high x 0.9m wide timber gates side by side on side of house. I will supply gates, gate latch, gate hinges , posts and screws for you to install.

Install 2x 1.8m high x 0.9m wide timber gates side by side on side of house. I will supply gates, gate latch, gate hinges and screws for you to install. You provide and install posts and bolts/anchors for posts

I need a licensed plumber with experience in apartment buildings and hot water systems to investigate recurring hot water issues in my bathroom. Issue: In the bathroom (shower and sink only), water temperature suddenly surges to excessively hot even when the mixer is set at a normal range. Once this happens, adjusting the handle does not stabilise the temperature. At the same time, there is a distinct mechanical noise from above, like a valve snapping shut (not the usual “water hammer”). Kitchen hot water is not in use, but no irregularities noticed there. What I need checked: Inspect my tempering valve to confirm if it is working correctly. Assess whether the issue may be related to shared risers or building-level hot water components. Provide a clear written report of findings so I can raise this with building management if needed. Skills required: Licensed plumber Experience with hot water systems and tempering valves Familiarity with apartment building plumbing (shared risers/central hot water)

Remove and replace the Blueboard panel with new Blueboard panel 6.0mm thick .The size is 2.2 x 1.1 metres. The frame of gate is 40mm tube steel. The hex head screws have to match other gate panel positions that is beside it.( 2 SLIDING GATES ) Paint match inside (Backyard )Exterior ColourBond and match exterior Porters Limwash Terracotta .The second gate will have to be painted in Terracotta limewadh to match as it is faided from the sun . Rear lane access and parking at rear lane .

I’d like a new aluminium picket fence installed at my property in Mascot. The style is spear-head top pickets with ball-cap posts (see reference photo attached), but with all-white posts and pickets for a uniform finish. Details: Approx 8 m of fencing along the front boundary Approx 3 m down one side boundary 1 x 90cm pedestrian gate to match (inward swing, standard latch ) Height: 1.2 m max (to stay within exempt development rules — no DA required) Powder-coated aluminium (all white including posts and pickets) Remove and demolish existing low brick fence Take away all debris / rubbish from site Supply + install (materials, posts, rails, hardware, latch, concrete footings) Neat, professional finish Budget: $2,250 (all-inclusive: materials, labour, demolition, disposal). Timing: Flexible, ideally within the next 3–4 weeks. Location: 78 Johnson St, Mascot NSW Note: Photo attached for style reference, but I’d like posts in white to match the pickets.

I need to remove the damaged tailgate and replace with a replacement part i have bought.

Hi, I need some small handyman jobs done: Fix 5 timber boards to the back of a gate. They’ve already been cut to size and painted, they’ll just need to be screwed in place. • Install a screw in a wall to hang a piece of art. Everything is ready to go, just need someone with the right tools and skills to get it done neatly.

There’s a persistent smell coming from my bathroom. I’ve already checked and confirmed there are no visible leaks. I need someone to: 1. Double-check for any hidden leaks or drainage issues. Inspect drains, toilet seal, and ventilation 2. Identify the source of the smell 3. Suggest and/or carry out a fix (basic cleaning/sealing if possible) Please bring any basic tools/cleaning supplies you may need. Location: Darlinghurst 2010 Date/Time: after 5pm workday or today Sunday 21st Sep

We have a small section entering the side of the house which needs a gate with a lock installed for privacy and security. Ideally this is a colorbond gate. You will have to provide the gate and install it. The price has taken this into account. It is around 245cm length and needs to be high.

install a baby gate from Bunnings into a study nook with no door note: not actually for baby, will be used to separate a dog and cat

I need someone to adjust the spring in my pool gate, so that it closes to meet compliance.

Concrete wall needs to fixed and iron gate re-installed/hung at front of house.,

I need a roofer who has experience sealing and waterproofing a flat roof entertaining area and replacing metal roof. This is not a handyman job I need a qualified roofer who knows what he is doing. The property is in Newtown. NSW. You would need to have a look at the job to do a proper quote. The measurements of the roof are metal roof 5.4m X 9.5m total square metres of colour boand roof and redo flashings is 51.3 sq m and the flat roof which needs rewater proofing is 9.4 X5.5 51.7 sq m. I need you to look at the job to give a more precise quote. The roof is in Newtown NSW. See photos.

We need someone who can repair the lock and hinges on 1 back gate and quote for repairs on a second gate 1. Wooden gate repairs - check and repair hinges so it swings open freely - remove and re-fit lock (possibly onto a new wood back plate) Also, when onsite, we would like a quote on cost to: Waterproof/seal a wire gate: including cost to Install secure plastic sheeting &/or rubber backing to seal gate at top of stairs against runoff/rain/flooding. (no images yet)

- Review the damage on the wall as there are already holes drilled in with previous screws - Reattach existing colourbond side gate to hebel wall. Note: this is a hebel wall, and I've had things come loose because incorrect screws or materials have been used in the past

Hi! I’m looking for someone to supply and install a motorised horizontal aluminium slat gate (modern black style) for a single car driveway (approx. 2.4–3m wide). Location: Hillsdale Style: Same as modern white wall + black slats design (can share photo reference) Gate type: Prefer sliding, but open to swing if more affordable Motorisation: Please include cost of automatic opener with remote Please quote for: • Materials (gate, frame, motor, track) • Labour (installation) • Optional: electrical hookup for motor (if not included) Send through examples of past work if available. Happy to arrange a site visit.

I need someone to reconnect the side gate of my house. The wind a couple weeks ago, blew the side hinge off the connection to the house

1) Have an existing timber slatted garden gate and the latch often does not catch at the top after shutting door and can swing open randomly. I need the gate to be either amended where it has a strong(er) spring that keeps it shut at all times and a new latch at the top or possibly completely replaced with a new child/pet proof version. I have a cat as well as small children that visit so gate cannot have spaces where either can get out. I need it to stay shut even when not locked. 2) I have another metal gate further down the side of the house and I have purchased a very fine black mesh outdoor sheet that I need fixed securely onto the entire metal gate. A timber piece may need to be fixed to block the gap at the bottom of the gate as a cat can easily slip out from under there too. Im flexible on budget as I know it will depend on whether the person appointed can make the existing timber gate work or whether a complete new one needs to be priced. Please advise how you would address this in your reply message.

Our wooden gate has been damaged; the frame has come undone. It needs rescrewing and reseating against the fence line. The hinges etc are ok - just needs to be reattached

The front wheel on our sliding driveway gate has fallen off. It seems like the screw thread has worn out due to friction over the years. Need a handyman to refasten/reinstall - may require installing a larger rivet nut (original hole fit an M12 bolt) and then rescrewing.