Find professional floating flooring services in NSW

Lay approximately 15 square meters of hybrid flooring.

showroom with floating floor which is sagging sections. around ten floorboards need reinforcing with wood and glued to floor board. equipment being placed on the floor is heavy. Need the work carried out during weekdays between 8.30am - 4pm

Need someone to lay my timber floorboards in my apartment. Total floor area is 24sqm to be laid and room layout is rectangular

Install or repair some floating timber flooring in kitchen in between removal of old kitchen and installation of new kitchen. Also install floor boards in a walk in robe area, around 2.5m x 1.5m

I have a floating timber staircase that has been stained dark brown and sealed. I would like all timber components of the staircase sanded back evenly to clean, bare timber, ready for a new lighter stain. The staircase has a glass balustrade with black metal fixings. The priority is an evenly prepared surface while preserving the integrity of the timber. Requirements - Dust-controlled sanding (essential). Sanders must be connected directly to professional vacuum/dust extraction equipment. Must minimise airborne sanding dust inside the house as much as reasonably possible. - The glass balustrade, flooring, walls and black metal hardware must be properly protected throughout the work. - Care must be taken not to scratch the glass with sanding equipment or abrasive dust. - Preserve square timber profiles. I do not want the tread edges or nosings rounded over. - Small areas around glass fixings and other locations that can’t be reached properly with a larger sander will need appropriate detail/hand sanding. - No chemical stripping unless discussed and agreed with me beforehand. - Please do not apply any stain, oil, sealer, polyurethane or other finishing product as part of this initial job. - The timber should be left clean and ready for staining. Final sanding grit should be appropriate for stairs and subsequent staining. I am looking for someone who has genuine experience with timber floor/stair sanding or timber refinishing, rather than general handyman sanding. Potential additional work There are multiple opportunities for further paid work if I am happy with the quality of this job. This may include: - Returning to stain and finish this staircase once the new colour/finish has been selected; - Sanding and staining a separate timber staircase in my loft; and - Sanding and staining a separate timber flooring. I would therefore particularly like to find someone experienced in high-quality timber refinishing who I can potentially use for the complete project.

Showroom floating floor is sagging in sections and needs reinforcing

Lots of scratches and scuffs on the floor and I am looking if it is worth sanding and polishing to remove them and make the floor last longer, or whether I get other flooring. Yes I’m aware that the colour will change slightly when sanded and that is totally fine :) Please see attached house plan. It is for all areas minus the bedrooms, bathroom and toilet

We have a floor that is approx 100 square metres in an new house. Looking for a quote per square metre on installing the floor if we supply the hybrid planks.

Between around 50 sq meters of floating flooring.

Hello, I need help sourcing and installing some floating floors. Specifically the RapidClick tiles: https://www.bunnings.com.au/hanwood-4-5mm-2-21m-crema-trav-rapidclick-hybrid-waterproof-tiles-5-pack_p0975468 I am in South Nowra, and I need these floors put over builder's plastic to protect the carpet floor tiles beneath them. This job just needs to be a simple fix, as it will need to come up eventually after the end of my lease on business premises. The room is a rectangle about 6mx5m Thanks, Jason

We have a small section of engineered timber flooring that needs to be lifted and replaced. The subfloor beneath the affected area appears to have dropped, leaving a gap under the boards. We believe the substrate will need to be inspected and re-levelled before the flooring is reinstalled. Seeking an experienced flooring contractor to assess and quote on the repair.

All materials supplied and in place. Just need some help laying the actual floor

Need to remove and replace with good quality floor. Need to come in to check for dimensions and quote. I also have a broken folding door if you can fix that.

Cut out and repair broken Hybrid Floor boards. I already have the timber to replace. Also patch 2 small chips.

A few Floating floorboards that are bouncy and need expansion gap I have spare floorboards

Floating flooring 2/3 complete currently, looking fo get it finished and skirting boards cut and fitted in livingroom and hallway

to install 40m2 to 50m2 of floating floorboards and underlay and to install skirting above the floorboards on the walls - also take away the old carpet

Floating floor boards lifting up. I think they don’t leave enough room for expansion. In front of bedroom door, stopping door from closing. Just need to adjust so they lie flat. Cost to include materials and labour.

We have a section of floating floor boards, vinyl I think, that are rising. It is an area of about 1 square metre. We need some one to take a look, suggest a remedy and carry out the work.

Looking for a quote to replace approximately 5–6 damaged hybrid floating floorboards in an apartment. Replacement boards are already on site and match the existing flooring. The current boards were previously replaced using the wrong thickness (7.5mm instead of 6.5mm), resulting in a noticeable lip between boards. Scope of works: * Remove incorrectly installed boards. * Install supplied replacement boards (6.5mm thickness).