Find professional picket fencing services in QLD

Install hardwood picket front fence – 12.5 m Materials supplied (hardwood pickets, rails, posts). Some post holes partly dug but ground is hard so jackhammer likely required. Tasks: – Finish digging post holes – Set posts and concrete in – Install rails and pickets Concrete mixer available on site but concrete will need to be supplied. Location: West End Brisbane. Looking for someone experienced with fencing or carpentry.

We are needing an area in the backyard fenced for our chickens. We have the wire and star pickets

I need quotes on a new picket fence gate to be installed as the current wooden posts are rotted and the hinges are rusted

Hi, I’m getting some Aluminium picket fence panels ( 2035x900high) and pedestrian gate (1090x900high) and one double swing gate ( 2x1700x900high). I’m happy to supply all material ( Excluding boring holes and concrete), I need someone to install them professionally for me.

Need to get 2 picket gates installed. No material on hands

I’m looking for a qualified person to supply and install a 1.8 m‑high PVC picket‑style privacy gate on both sides of my property. Please see attached photo with red circle for indication. The total length required would be around 5-6 meters. Scope of work: -Supply and install 1.8m PVC picket privacy fence - Include one gate on each side, PVC material, matching style - Gate width: 1.5m - All materials, posts, hardware, and labour to be included - Must be durable, low‑maintenance PVC suitable for outdoor use - Please provide photos of previous similar work if possible

Front fence on either side of driveway to be replaced. Keep fence section going down driveway. Approx 8 metres. 1200mm palings painted white. Reuse gate frame. Insert letterbox.

We need to block under the house to stop the puppy from going under the house with chicken wire and pickets with no gaps. And we don’t have chicken wire neither pickets. My wires run under the house so not safe and need this done asap please

Some 10 pickets are broken in my fence These need to be reinstalled

Old picket fence about 1m tall. Need it removed to put up new fencing eventually. About 20m long at front of house. Flat level land. Not flooded.

Pull out old chainwire fence with star pickets (about 1.2 metres high and 16 metres long). Easy access.

Install pickets and runners for a fence

I have 12 star pickets that need to be driven in 400-500mm and then 6 timber panels that need to be screwed in to make privacy screens

I have a small fence repair job needed in Beechmont for replacement of two panels of pickets and a replacement the upright, base board and braces, plus painting it white. Unfortunately the current panels have been on the ground for a bit and can't be reused. Approx 5mL x 1.5mH pickets x approx 53 pickets - second photo of upright fence design. The footing of the upright would need to be removed and replaced with the new one.

Pull up: existing picket fence and wire. Install: split post & picket plain wire fence. All split posts, pickets, wire and ratchets etc will all be supplied and ready. I just need someone to pull up the old pickets /wire etc and install the new fence. Fence is in a single straight line and roughly amounts to 28 pickets and 14 posts (estimates chat gpt 🤣) Attention to detail required, as needs to be straight and pickets all facing same direction etc (which is likely all very standard for an experienced fencer)

Star pickets plus wire to make temporary fence . 6m

Mark a property boundary with star pickets driven into the ground. (Pickets and driver provided)

JOB DESCRIPTION (hourly rate) - New Build Front Fence - 15m, 1.2m entrance Gate double Gate Driveway - New Build Left Side Fence - 24m, 1.8m - New Build Right side Fence - 8m, 1.8m

Not for profit seeking 1-2 Labourers to assist installing 500 metres of star pickets to create an electric fence at our Equine Facility where we provide therapy sessions for Veterans and the local community.

Few pickets fallen off and one part has fallen off