Find experienced local fencing contractors in North West Perth

Wanting a timber picket fence built to front garden. Approx 3.5m x10m x7m (including gate) maybe 1200 high? Want old school pickets. Empty yard so nothing to remove first. Open to suggestions. I’m happy to paint it myself once up. Thanks in advance. This is the house and yard with a suggested picture of the fence.

Need a new gate installed, preferably not wood. 1100 wide and 1700 high approx

I need 2 x identical garden gates installed in my front courtyard. They are 1800mm high x 900mm wide & the wall openings are 1000mm wide, so will need timber to fill gaps (you to source & supply). I already have the hardware (hinges & latches), which also need to be installed. Require proof you've done this sort of thing before.

The gate is 0.9m wide * 1.07m high and weights 10kg.

Note: My task includes materials and labor. I need a gate for my garden path. The gate should be 1800mm height and 1200mm width with a short fence about 870mm width with the same height as the gate to replace my old wooden gate and fence as shown in the photo attached. I want the gate and fence to be light gray colorbond with a double sided lock that can be locked/unlocked with a key from both sides. (These measurements are not accurate and the person who gives an offer should make their own measurements prior to starting the job) - Due date: Before Wednesday, 10 January 2024

Fence around my front garden. Want something solid upto about 1m and the semi transparent above that. Also would prefer the colour to be white. Will need posts and gate also etc. - Due date: Flexible

Replace garden gate and remove old gate. I will provide the gate, it just needs to be installed. This is the gate: https://www.bunnings.com.au/900-x-1800mm-gate-cypress-arch-closed_p0120589 And this is the closure: https://www.bunnings.com.au/protector-aluminium-primrose-d-latch-and-striker-pack_p1141311 - Due date: Flexible

I'm looking for a side gate in preparation and getting a dog and stop it from escaping - Due date: Flexible

I currently have a pool fence in my garden but I need to move it so it is at 90 degrees to its current location. This will require 4 posts to be concreted into the ground, the fence moving and then the old fence posts to be removed. The colour of the fence is primrose and you can either supply the posts or I will buy them. I am not sure how much this will cost so I have put an arbitrary figure in the budget. In the new fence location the pavers will either need to be cored or removed and cut around the new fence posts. - Due date: Flexible

Get rid of the old Hardie fence, build new fence around, about 65m - Due date: Flexible

Swing gate relocation (removal and install) to front fence + supply any materials needed for the job.

I need a dog fence installed in my courtyard area (see photo attached with red marked section). Details: • Approx length: 6–8 metres (straight run) • Surface: paved/concrete • Height required: approx 90cm–120cm • Secure enough for a medium-sized dog • Would prefer black powder-coated panels (open to suggestions) • Must be securely anchored (not temporary plastic fencing) Please quote including: • Labour • Materials • Any drilling/bolting required Please quote total cost including materials and installation for approx 6-8m dog fence. Thanks!

I am looking for someone to supply and install a wooden gate/fence (custom built to size) in two outdoor areas of my property. This is not a decorative job — the main purpose is containment for a cat/dog, durability, and safe access. The $1200 budget is inclusive of all materials and labour. Area 1 • Total width: ~ 142 cm • Requires: Gate + fixed fencing • Height: ~180 cm • Minimal gap at bottom (must be pet-proof) Area 2 • Total width: ~ 253 cm • Requires: Gate + fixed fencing • Height: ~180 cm • Minimal gap at bottom (pet-proof) General Requirements Materials: Simple and durable open to suggestions. Finish: Doesn’t need to be fancy functionality over appearance Gate: Lockable or latchable Bottom gap: Must be small enough that a cat or small dog cannot escape Supply & install included Must be suitable for outdoor use I’ve attached photos of both areas for reference. I’m happy with practical solutions and open to suggestions that keep costs down while remaining secure.

There is around 70m of fencing in our backyard. Looking to install extend fenceline up 400/600mm and install 'lean-in' PVC piping with mesh to deter the dog from jumping. Materials supplied, just looking for labour.

Require an area of land to be fenced adequately enough for 2 protective dogs can reside within...

I need some oscilot cat rollers put on top of colour bond fence . I have the oscillot

Putting a dog fence in the elevated Garden bed area Happy to cover the cost of the material

demount 1 pool fence panel 2m long and reposition, demount 1 pool fence gate and repositio. also mount 2 new fence panels. all to be mounted on core drilled spigots. remove 3 core drilled spigots from old install. - Due date: Needs to be done on Sunday, 23 October 2022

Would like approx 5m of colourbond fence replace (Basalt) reposted and two plinths added. Photo has been added to display what fence you will be replacing

Repair a damaged Colorbond rear fence. Approximately 3–4 panels require replacement or straightening. Looking for an experienced fencing contractor to inspect and quote. Materials can either be supplied by you or reimbursed separately. Fence to be the same colour and type.

Need an experienced person to install a colorbond fence. The site is prepped with soil removed. I can supply the aluminium plinths, fence panels and posts; Need to install the aluminium plnths, fence posts and concrete them. The job is about 14 metres long, with two or three aluminium plinths forming a small retaining wall around 40 to 45 centimetres high. Work includes setting posts in concrete, lining everything up straight, and securely screwing the panels in place. This needs to be completed within the next five to eight days.

Increase height of back fence by 350 mm. Materials supplied but not fixing screws. 12.5 metres wide.

Single fence gate Type of gardening: Other Size of garden: Under 50m² Has green waste bin: Yes

I am looking at installing a triple, split height, Colorbond Gate between my garage and boundary fence over the caravan/boat paved driveway.

Scope of work: Replace up to 4 standard Colorbond fence panels (approx 1.8m) Remove 3 old post foundations and install new posts Includes removal/disposal of damaged material and installation Note on panels: Some old panels are rusted at the bottom but a few may still be in usable condition — happy to discuss reusing any good ones to reduce cost Additional note: My neighbour may also be interested in separate fencing work on their side of the boundary (separate from this scope). Note about Budget: Total Cost target: ~ $1,300 including material and labor Can negotiate labor rate around savings that can be achieve on materials side.

Remove 2 posts that have rusted through, install new posts and connect all hardware. Replace paving after installation. Remove all rubbish leaving site clean. New posts and rapid set concrete supplied by owner. Fence is at front of house and has excellent access.

My mum has an old wooden gate that is falling apart between her house and the neighbours fence (already in colour bond). She just requires a small portion of fencing and the gate in between with a secure lock. The gap is approximately two meters wide.

Looking for quotes for supply and install of new Colorbond fence in Merriwa WA. - Approx. 10m long - No existing fence to remove - Need plinths - After supply and install quote Please message with pricing and availability. Thanks.

Need 1/2 sheets of colourbond and posts supplied and installed to match existing also need old sheets taken away upon completion.

Need colour bond gate installed at property

The fence post needs to be replaced due to rust

I need an experienced fencing contractor to remove and relocate an existing Colourbond fence that is currently encroaching onto my property on Hidcote Way. Both neighbours have completed independent licensed surveys, confirming the fence is out of position. The correct boundary has now been identified and marked on site. Scope of Work: Remove existing Colourbond fence from incorrect position Reinstall fence along the new surveyed boundary line Re‑use existing Colourbond sheets (good condition) Supply & install 14 new steel fence posts Install a 300mm Colourbond steel plinth along the bottom to prevent soil wash-off Ensure fence is level, secure, and aligned with survey markers Remove any excess waste from site Survey & Encroachment Details: New boundary markers already placed Fence currently sits inside my property and needs to be shifted to the legal boundary Land is mostly level with no major slope issues Clear access from both sides Materials: Provided: Existing Colourbond sheets Required from Tasker: 14 new posts Concrete 300mm Colourbond plinth (preferred) All tools & labour Other Info: Neighbour is aware and has agreed to the relocation Flexible with dates - but must complete by 13.07.2026 Survey plans and photos available

New gate to be measured , supplied, and installed in new location at the side of the house to accommodate a caravan.

Hi, Seeking someone experienced to help with the following: - Remove 12m of damaged Hardifence - Replace 12m of damaged Hardifence with 1800m high matching Colourbond fence (e.g. Paperbark) - Remove approx 2m side panel fence (refer to picture) - Replace approx 2m side panel fence (refer to picture with blue circle around it) *Tasker to supply parts and labour. Tasker to provide invoice. If price is right and work is done well, I'll be looking to engage you permanently whenever items need fixing in the future - there's always stuff coming up that needs fixing. Cheers.

Need a colourblind side gate. Supply and install.

pedestrian side gate mounted

I am looking to get someone to assemble a Colorbond gate kit (from Teamwork Fencing) and install it in place of an existing wooden gate (removal of old gate will be done by me). I have purchased the kit and have it ready for assembly. Please note that the gate posts will not be concreted in to the ground and therefore, will require cutting to size.