Find a professional wrought iron fence service in NSW

Replace front wire fence that is anchored with cement with a wrought iron fence. - Due date: Flexible

Need a fencer / welder to install a wrought iron fence (similar to what you in parks) about 3m for guard dog at side of the front of our heritage brick home. - Due date: Flexible

One wrought iron gate ( from a pair)needs the stabilisation pole to be reset in concrete and gate reattached , so that both gates are alligned and can be closed. Have photos. - Due date: Flexible

Install a wrought iron fence/gate at the front of house. Approx 4m long

Need a piece that has come off riveted back to the fence - Due date: Before Sunday, 8 October 2023

Install and drill an aluminium letterbox on a wrought iron fence at our terrace house - Due date: Flexible

Repair cast/wrought iron fence. The fence has one sprearhead broken and needs to be re-attached - I have this spearhead. The gate is missing a catch for the gate latch to lock into. The gate is also missing 4 spearheads. - Due date: Flexible

Hi i need an existing concrete fence demolished and a new 3.8m curved concrete hob built, to enable a wrought iron fence to be installed. - Due date: Flexible

Hang sheets of iron around the pool boundary fence line to cover rails. This has been half done just need it finished. I have purchsed gates for the sides of the house but will need someone to install them. This will involve removing old gates, installing poles and hanging gates. - Due date: Before Monday, 10 July 2023

On the entrance of house, the manual iron gate, the bolts have come off. And it is not closing properly. - Due date: Flexible

Need our wrought iron gate repaired as it no longer locks and our fence repainted. - Due date: Flexible

Supply and fit a child proof pool lock to a wrought iron gate - Due date: Flexible

I have a set of two new wrought iron gates that measure 200cm (w) by 185cm (h) complete with two hinge posts. The hinge posts need fixing to the stone pillars that are at the entrance to my drive. Some stone will need to be ground / chiseled from the pillars to create a flat surface where the posts are fixed. The gates are heavy ( 100kg +) - Due date: Flexible

Build corrugated iron fence to act as a visual barrier along back fence. 10m wide, 1m high. Chippy/ handyman job - posts into ground, nail to corrugated iron Please buy materials (monument corrugated iron, posts) and will reimburse outside labour cost. - Due date: Needs to be done on Monday, 3 April 2023

6 old verandah posts replace and the corner laceworks with friezes.

Iron fence and iron gate paint is mostly chipped and dirty - Due date: Flexible

Install sliding aiuto gate need to c cut concrete and insert posts into ground

Hoop iron front fence of 1870’s corner terrace requires straightening of 3 verticals and straightening and reattachment of another. Sandstone foundations and coping currently being relaid for fence to be re seated. Fence is approx 3.5m W x 2.5m Return and currently in two pieces which will need to be welded at corner when refitted. - Due date: Flexible

New pole home needs filling in around piles with corrugated iron and lattice. Need help as can do some task myself, can supply all materials - Due date: Before Friday, 4 November 2022

We need some rusted sections of wrought iron fence repaired - cut out and new sections welded. We also require old paint to be removed from fence in preparation for rust proofing/painting. - Due date: Flexible