Find experienced local fencing contractors in North West Perth

I need 2 x identical garden gates installed in my front courtyard. They are 1800mm high x 900mm wide & the wall openings are 1000mm wide, so will need timber to fill gaps (you to source & supply). I already have the hardware (hinges & latches), which also need to be installed. Require proof you've done this sort of thing before.

The gate is 0.9m wide * 1.07m high and weights 10kg.

Note: My task includes materials and labor. I need a gate for my garden path. The gate should be 1800mm height and 1200mm width with a short fence about 870mm width with the same height as the gate to replace my old wooden gate and fence as shown in the photo attached. I want the gate and fence to be light gray colorbond with a double sided lock that can be locked/unlocked with a key from both sides. (These measurements are not accurate and the person who gives an offer should make their own measurements prior to starting the job) - Due date: Before Wednesday, 10 January 2024

Fence around my front garden. Want something solid upto about 1m and the semi transparent above that. Also would prefer the colour to be white. Will need posts and gate also etc. - Due date: Flexible

Replace garden gate and remove old gate. I will provide the gate, it just needs to be installed. This is the gate: https://www.bunnings.com.au/900-x-1800mm-gate-cypress-arch-closed_p0120589 And this is the closure: https://www.bunnings.com.au/protector-aluminium-primrose-d-latch-and-striker-pack_p1141311 - Due date: Flexible

I'm looking for a side gate in preparation and getting a dog and stop it from escaping - Due date: Flexible

I currently have a pool fence in my garden but I need to move it so it is at 90 degrees to its current location. This will require 4 posts to be concreted into the ground, the fence moving and then the old fence posts to be removed. The colour of the fence is primrose and you can either supply the posts or I will buy them. I am not sure how much this will cost so I have put an arbitrary figure in the budget. In the new fence location the pavers will either need to be cored or removed and cut around the new fence posts. - Due date: Flexible

Get rid of the old Hardie fence, build new fence around, about 65m - Due date: Flexible

As titled. Installation of aluminium garden edge. 7 mtrs

Require a garden trellis as per images below installed on 2 colorbond fence panels. The panels are roughly 1800 x 2400 each. Please advise if your quote includes materials or not

We need someone to cut the bricks and install the garden gate. We will supply materials. You need to have tools.

I need a new gate and side panel installed, gate is timber from Bunnings Job must be done in the next week in Banksia Grove I will buy gate, panel and posts

There is around 70m of fencing in our backyard. Looking to install extend fenceline up 400/600mm and install 'lean-in' PVC piping with mesh to deter the dog from jumping. Materials supplied, just looking for labour.

Require an area of land to be fenced adequately enough for 2 protective dogs can reside within...

I need some oscilot cat rollers put on top of colour bond fence . I have the oscillot

Putting a dog fence in the elevated Garden bed area Happy to cover the cost of the material

demount 1 pool fence panel 2m long and reposition, demount 1 pool fence gate and repositio. also mount 2 new fence panels. all to be mounted on core drilled spigots. remove 3 core drilled spigots from old install. - Due date: Needs to be done on Sunday, 23 October 2022

Need colour bond fence installed of 1.8m, with plinth/blocks underneath. Just one panel and New post required.

Remove old fence about 1.5m x 2m roughly Install new colorbond gate 1.5m x 2m roughly Install 5m x 1.2-1.5m colorbond sheeting from fence to gutters

Old fence taken down and new colorbond gate installed . About 1.5m width x 2m height

Install 4 plinths to the existing colourbond fence. Plinths will be supplied already

Install Colorbond fencing. Approx 6mtrs by 1.8 and taper down after the garage. As per pic Approx 24m by 2 2m high from the back wall to the garrage. Ground is soft sand as per pics.

Karrinyup Lakes Lifestyle Village has a colour bond steel fence between two villas. One steel post and two lower rails have rusted and need to be replaced. We supply all materials. This is a labour only job.

Colour bond side gate for boundary fencing

3-4 fencing panels were broken in recent storms. I don't know if it Hardy or Colourbond fencing. Therefore new panels are required and their installation.

Need my Colorbond fence painted due to bore water stains 11 panels @ 2400mm per panel.

Remove 4m of asbestos fencing. Replace with 4m of colour bond fence @ 2m height

I’m building a house with a colorbond fence around it. I would like to add a single-gate door to the fence by the side of the house that’s about 1.5m wide

Hi all Looking for a fencing contractor who can take out old asbestos fence and replace with 31 metres of colorbond fencing. We require the fence to be max height (2.1 high). If interested, please message me. We are located in Dianella. Cheers

Fence has rusted away at the bottom and I need about 3m replaced with a bottom rail. I have purchased all materials

2x1m colorbond gate supply and install. ~4x2.1m colorbond fence supply and install. Will require: • three 3 meter 50x50mm posts • at least 6 aluminium sleepers to act as small retaining wall

Remove existing side panel. Supply and install new gate.

Colourbond fence track/post has broken/rusted and needs replacing. One post. Capping and fence length intact and fine to reuse. Concrete base for post will need removal and replacement. Heritage red post/ track required.

Need 1x standard 1.8m colorbond panel to be installed with plinth. At this stage in surfmist colour. Price is flexible

Would like to get fence replaced Person who put it in messed it up

Colorbond fence needs replacing Wasn’t done correctly the first time

Colorbond Gate Side Panel - Supply & Install. To replace limestone blocks which have been removed. Post with swimming pool style lock has been removed and needs to be attached to the new panel.