Find experienced local fencing contractors in QLD

The gate doesn’t latch shut anymore and will need fixing

All new materials. Install 300mm high extensions on top of Colorbond fence. 7 x bays. Erect small garden shed. Size 2.25m x 0.78m 2.12 high Concrete pavers already installed.

Replace the wooden wall with sleepers or concrete block wall and push back barrier slightly. Open to practical suggestions on creating more space.

Looking for an experienced fencer to install a low, see-through aluminium garden fence along my front boundary. It sits on top of an existing concrete sleeper retaining wall, so no major groundwork is needed. It’s a corner block, so the fence must stay low and see-through to keep clear sightlines across the corner truncation (road-safety requirement). SCOPE • ~900mm high, flat-top see-through aluminium panels • There are pre-installed galvanised post stirrups on the wall — reuse them if they suit, otherwise use flanged (base-plate) posts dynabolted to the wall cap. Happy for you to advise what you recommend after measuring PREFERRED MATERIALS — ProtectorAl Aluminium Flat Top Garden Fence system (available at Bunnings): • 2400 x 900mm Flat Top Garden Fence Panels • 50 x 50mm flanged aluminium posts + caps • ProtectorAl panel brackets • Colour: [e.g. Pearl White / Monument — to confirm] I will buy all supplies just need your labour, skills. If you wish to bring your own as a turn key package, please confirm that in your quote

Repaie the small part of wood garden fence, about 5 m

Replacing a wooden garden fence, approximately 25mtrs in length, 2.mtr wide section probably 1.8 mtrs high pailings. Wooden posts seem mostly ok , gate steel should be ok just needs new wood fixing to it and maybe hinges. Prepping prior to sale. Inspection recommended to view extent of job, price flexible, assuming wood replAcement is cheaper than colourbond. Can give further details on request, ideally need doing before end of tax year

Need to install a gate between the deck and the lawn. All measurements in the photos attached.

Hi. We need to get 2 swing style garden gates fixed to make them close properly again. I've attached photos. The screws holding the latch on one of the gates have come out so need bigger metal screws to re-attach the latch securely. The other gate I think just needs readjustment so that the latch clicks into place properly. Thanks, Wes

Please see the photos. 60m of boundary to be fenced by you. The ground is mostly flat but has a slight fall as shown by the contour lines in the drawing. I will remove the old fence, supply the timber sleepers for under the new fence, pay for the new PVC fence that you will order from the supplier of my choice. You will measure the job, order the fence materials from the supplier of my choice (which I will pay for and receive on site), install the new fence, and remove any leftover rubbish. This job can be conducted during weekdays but can’t be completed on a weekend. Successful bid will have experience with installing PVC fencing, and provide photos of their work. Thanks.

We are required to increase the height of our wooden garden fence to comply with swimming pool regulations. We will supply materials.

Fence repair Type of gardening: Other Size of garden: Under 50m² Has green waste bin: No

Fence assembly and garden labour.

Need a Hydraulic gate closer magnetic latch put on gate Mulch put on garden & glued Rocks on path glued Will provide materials

Wood garden fence - need 5 new uprights installed, have the poles and concrete, just need someone to install

Fix house garden gate which has broken off its hinges (needs welding) also need to trim the gate down (metal frame with wooden slats) as does not fit flush to side of house wall as gate post must have moved

I have the brackets and nails and net , wood fence, 3 sides, 1m x 2m x 6m . Need them drilled in and net installed on the brackets

I need someone to make and install garden gate/side gate. I have frame and wood plank. You will need to bring tools.

I need a ~3.5m wire fence (provided & image attached) to be installed in front of my garden bed (as per photo) to prevent my dogs (German shepherds - so it needs to be sturdy) from going in there. Provided 4x steaks, and dog wire fence 1200x50m (won’t need all of it). Tasker to have all necessary tools for this.

2 x side gates purchase and install Block off both sides of the home to keep dog secure $400+ materials you supply receipts for

Put up wood fence............

I need mesh fitted to an existing garden fence to keep my Jack Russell Terrier from getting out. It's a rental property so no permanent fixings or footings, prefer PVC or similar mesh zip tied to existing fence. Access available for detailed measure and quote. Type of gardening: Other Size of garden: 150m²-300m² Has green waste bin: No

Need someone experienced to locate and repair one or more breaks in a PetSafe underground dog boundary wire. The boundary wire runs around the perimeter of our property, with a total length of approximately 350 to 400 linear metres. The system has stopped working, so there is likely to be one or more breaks in the wire that need to be found and repaired. Requirements: • Experience with PetSafe or similar underground pet containment systems preferred. • Must have the equipment or knowledge to locate wire breaks efficiently. • Repair any damaged sections and test the system to ensure it is fully operational before leaving. • Please provide your own tools and repair materials if required.

Need to block of play area from dogs, Pics attached is what I want ruffly but I’m happy to take your ideas and input to get this done. I will purchase the items.

Looking for someone to install a Sureguard Pingg-String cat containment system on the timber paling fence at my property in Augustine Heights. Total fence perimeter is approximately 58 metres. All components have been purchased and will be provided on the day. This includes insulated cable, extension kits, end post kits and energiser included. The job involves mounting bracket arms and insulators along the top of the fence, running and tensioning the wire angled inward toward the yard and rigging the gate loop over the single gate. The energiser position will need to be assessed and decided on the day based on what works best for the setup. It needs to be installed in a north-facing position with access to full sun. There is one fold-down clothesline mounted to the fence that will need the wire routed carefully around it with extra insulators either side to avoid contact with the metal frame. No drilling into structures required as all fixing is into timber palings. Happy to be home on the day to show you around the property before you start.

* Replace existing pool glass with frameless glass * Repair/adjust the pool gate/s so it complies with current pool safety requirements. * Complete any work required to help obtain a pool safety certificate.

Approximately 55m of 1200 mm galvanised dog mesh fencing with round timber posts concreted in, standard post spacing, one 3.6m galvanised farm gate, supply and install. Inspection needed to confirm final distance and price if distance varies. Alignment to be determined onsite . Price to be supply and install of everything.

Approximately 600 m of Barbwire fencing with four corner post

Hi, our dog gate is coming off the wall and we need it fixed so the puppy can’t get upstairs

I am seeking a suitable solution to safely secure the bottom and sides of my two existing timber exterior gates to prevent my small dogs from getting out of the property. Requirements: Dogs are small-breed Cavalier King Charles Spaniels and can fit through relatively small gaps. The two gates must remain fully functional and able to open and close normally. The solution must prevent the dogs from squeezing underneath or through gaps along sides of the two gates. Any materials used should be durable, weather-resistant, and securely attached. The installation should not create sharp edges or hazards for pets, or prevent the ability to unopen gates. Possible Solutions (Open to Recommendations): Galvanised wire mesh or pet-safe chicken wire. Heavy-duty pet fencing mesh. Custom timber, metal, or composite gap fillers. Brush-style gate seals or similar products designed to block gaps beneath gates. Any other professional solution that effectively prevents them getting out, while maintaining gate operation. Scope of Work: Assess all exterior timber gates and identify potential escape points. Supply and install suitable materials to secure the bottom and side gaps of gates. Ensure gates can still be opened and closed with ease after installation. Provide a neat, professional finish that blends with the existing fencing where possible. The primary goal is to create a secure yard enclosure that prevents small dogs from getting out without affecting the usability of the gates.

We have some fencing, not great. Just need a strong man to help hubby do some small fencing jobs around the yard. A dog area n an opening gate to start with.

I need a secure but temporary fence installed for my dog to enjoy some grass time. Open to suggestions but thinking chicken wire + star pickets. Roughly 20-25m x 10m

Moving to a new house and need to fence off some grassed area out the back for the dogs.

Need someone experienced with DogWatch Hidden Fence systems to diagnose and repair our existing dog containment fence. Issues may include: Collar not responding consistently Boundary/fence not activating properly Possible collar or transmitter troubleshooting Testing loop wire and signal General system check and repair I have a new battery and collar powers up however perimeter fence is no longer activating the collar. Must have experience with DogWatch or similar electric pet fence systems. My dog is a very friendly labradoodle who may bark but is harmless.

I have an electic gate which opens inwards with 2 panels upon opening, they are not aligned and need lifting up a few inches to fix Located burpengary

Broken Pool gate latch to be replaced. I have new latch on-site. 2 panels of glass fence to be relocated. Sprigs to be removed from current, part of deck to be cut and sprigs and panels to be re installed x 2 old sprigs and glass onsite on-site. Colourbond fence to be straightened. Tree has pushed fence. 1, possibly 2 footings to be re done. Need to use existing colourbond in place.

Looking for someone to install a temporary dog fence along a boundary line (approx. 30m). Job involves: Installing 16 star pickets Attaching dog wire with galvanised tie wire Slightly sloping boundary Fence needs to be secure for a medium-sized dog Materials provided: 30m dog wire 16 star pickets Galvanised tie wire You’ll need to bring your own tools/equipment (e.g. star picket driver, pliers, wire tensioning tools). Timing: Available anytime this week — would love this done within the next few days if possible, as I’m moving in soon and need the fence in place to secure my dog. Please send your quote and availability. I’m happy to assign the task quickly for the right person. Ideally looking for someone who has experience installing star picket fencing — Please only make an offer if you’re confident you have the experience and tools to complete this task. Thank you.

I have had 20mtr of fencing taken out by a tree and looking for someone that can re-errect the wire. The site is clear and poles are in. 20 mtrs of dog wire that will need a strainer top and bottom. Thanks

Temp fence put up with star pickets and chicken wire. 5m but it isn't flat.

Needing mesh installed on fence to stop dog getting out and gap filled

Roughly 10 metres of fencing to put up just 5 star pickets and wire not a big job at all. Just supply all materials (will cover cost plus job cost)

Approx 25metres needs to be sourced and installed

Installation of colorbond side gate to side of property. Dimension 1.66m wide. Colour Woodland Grey

I would like to extend my current colorbond fence up 450mm. It is only 5 panels in length. Would like to keep it the same style (colorbond sheet) as current fence and not a lattice extension or screen.

Need to fix the Colorbond fence that fell during Alfred cyclone

21m colourbond fencing supply and install needed asap as our large dogs can jump over it. Also need removal of old fencing.

Fence post at the entrance has bent due to strong winds. The base of the post is heavily rusted and has broken, causing the fence to lean and no longer align with the entrance gate. The gate is now difficult to open and close.

Fence post at the entrance has bent due to strong winds. The base of the post is heavily rusted and has broken, causing the fence to lean and no longer align with the entrance gate. The gate is now difficult to open and close.

My colourbond gate won't close properly and I need it repaired please

Post has come away from concrete footing , needs digging out and a new footing and post installed

Chapel Hill, QLD 4069 Need a fence installer for about 42m of fencing. Rough split: - 18m Colorbond - 18m lapped and capped timber fence - 6m stepped timber corner - 2m timber to match neighbour fence I have Colorbond sheets and rails on site. I likely need you to supply posts, caps, screws, concrete, timber, paint and other bits. Fence goes in front of a sandstone retaining wall, close to the boundary. Ground is clay and sloped in parts. Wanted: - Around 2m high, or highest simple/legal height - Solid posts, set deep enough for clay soil - Lapped and Capped Timber Fence painted Monument - Small 2m neighbour match section left unpainted - Colorbond does not need paint - Simple, neat, strong finish - Clean up after Budget is indicative but limited - please provide detailed quotes and when you can start and how long it would take. Site ready for work to start today. Photos/sketch attached.

Tasks: • Take down existing fence and disposal (as pictured) • Install 16.2m of Colourbond fence with a tapered ending /cut down panel on the nature strip end only to match height of front fence. • Require it done in 1 day (if possible) as I have a small dog. Located at Sandgate • All materials are on site ready for installation. • Please see attached measurements of the 16.2metres. • Materials on site are: 50 x 50 x 1.6mm Steel Post - 2400mm - Monument SP5024MO 2 50 x 50mm Square Profile Plastic Cap HW5355 2 Colorbond Channel Post - 2400mm - Monument CS3200MO 14 Colorbond Rail - 2400mm - Monument CS4000MO 14 Colorbond Trimline Infill Sheet - 1790mm High - Monument CS1850MO 21 Concrete Rapid Set (20kg) HW5510 12 10-16 x 16 Tek Screw - Monument HW5000MO 84

During concreting work, my colorbond fence was removed, need help with refitting back

We would like a quote to install a colourbond fence approximately 34m alongside the timber fence. Agreement reached with neighbour as the current fence is not on the boundary. Would like the fence to be installed as soon as possible.

Old wooden fencing needs removal and replacement with new Colorbond fencing

Inspect, quote and install a colourbond fence.

I have purchased 2350x600 fence extension panels (3) for my Colourbond fence. I just need the installed. https://youtu.be/KXb_rdje5TY Ideally Wednesday or Thursday this week.

Footing of a colourbond fence was accidentally excavated, when backyard was excavated. Fence is now beginning to lean for that one fence panel, need footing replaced underneath artificial turf. Please include cost of materials in the quote.

Looking to get colorbond fence and electric gate supplied and installed in my front yard, also old fence removed. Pic attached for reference of measurements

9.6metre colour bond fence to be put up

Our Colour bond fence is in good condition, however the metal that goes into the concrete has rusted, we need a quoted for the repair on 4 or 5 supports to be sorted