Find experienced local fencing contractors in SA

Attach 2 x bamboo garden gates to poles

Hey there - my garden gate got misaligned over the time - I struggle to close it. Need someone to align the gate & fix up Make me an offer Need this done asap

Garden wooden fences are loose and damaged , need repair and reinforcement

Garden gate dropped a bit on one side and making it difficult to open and close

I am looking for quotes to install a rendered boundary wall at my property. Either blueboard or brick depending on price. "Budget" on this ad is not actual budget, as I dont have much idea of how much it will cost, hence requesting quotes. Approximately 27 lineal metres, 2m height (red line on image below). Will need letter box built in, and approx 1.8m area where gate will go (blue line; I am unsure how to finish this section over existing concrete path).

Side gate latch and hinges were damaged by strong winds and need fixing.

I’m looking for someone to build a garden fence (just the wooden part), similar to the one shown in the attached picture. The fence will have 3 sides, and the measurements 6M each. Will supply all the materials required

We have just moved into a new house and the developer did not replace the old fence at the back of the property. It’s a shared fence with a neighbour directly behind. We have discussed with them that we will clean and spray paint it to match the side fence. Please quote me for this - fence is 9m long, about 1.6m high. Thanks.

Looking for a fence installer to do my garden's fencing. I want the fence height around 1 - 1.2m. I also need some advice on if I should only do one side (around 10.5 meters)'s fence or two sides (around 10.5m x 7m) etc. etc. Material requirement: aluminum slat. Thank you.

Install a Garden Gate To access from the side

To be installed already purchased garden gate, the existing fence posts are solid, the gap between the posts is 840cm, the gate is 900cm w an A1 protector aluminum flat top pool gate. I'm hoping to retain the existing post and mount the gate on the outside of the posts. I can purchase the hinges and D-latch you recommend or if you can provide.

Just after a side garden gate, approx 1 metre in length and 1 metre high. I’ve attached an example of the type of gate I’d want. There is concrete covering 1/3 of the ground with dirt on 1/3 so I’m unsure how it will need to be secured. Happy to supply more pics of the area if needed.

I need a small gate 920x 120 CMS installed in a section of my garden.

Fix / replace hinges of side garden colorbond gate (destroyed by strong winds) and reattach the gate. Replace gate latch with a new one similar to the old one. Images are uploaded here.

Install post in ground and hose reel

Needing someone to install a gate separating our garden from the front gate on a good neighbour fence to keep the dogs out. Unsure on what Is a reasonable price. - Due date: Flexible

We and our neighbour's are replacing about 10 meters of fencing. There is a query, but no conflict about the fence line - Due date: Flexible

Hi. We are needing someone to Install fence screening for our backyard. Open to offers.

tree pruning repair a gate replace part panel of front colorbond fence with a gate.

Looking for someone experience with fencing to install a fence around a vegetable garden ASAP before this weekend please! Have standard stratco pool fencing panels and poles ready for installation. Plan is to enclose back corner of yard with good-neighbour fencing in place. Approx dimensions of the area is 8m x 6m. Handyman was a no-show and keen to complete ASAP - Due date: Before Saturday, 16 April 2022

I need someone to fabricate and install some front gates. Gates should not be able to be seen through. Was thinking galvanised frame and colour bond panels but open to options. The supporting posts are installed. Will update with measurements soon.

old front brush fence approx 10m by 3m L shape, remove and dispose of all brush fencing, and posts - ready for new fence Concrete at bottom removed also

Quote for a tubular fence to enclose an area

Need a gate to fence off an area for my dog, roughly 1100-1200mm high - 6m long. One end is against bricks and the other is against a fence or a wooden post Happy to provide fence can talk about it after

Hoping someone “handy” can come up with a budget friendly solution to dog proof the bottom section of my fence (it’s a rental). Needs to be aesthetically pleasing also. It’s about 8m long and approx. 15cm gap underneath. Will pay for whatever is needed from Bunnings etc plus your time. I need done ASAP as we can’t use the front yard until it’s secured. I’ve entered a nominal amount in the budget area until we have a better idea of options. Task needs to be undertaken after 12pm. Cheers

I need someone to go and take a look at a dog trailer that's sitting in my friends driveway to see what needs to be repaired on it so that it can be towed back to my place in Campbelltown. I would then like that same person to do the repairs and the towing back in the following days but this task is just to go and look and see, we will sort out the rest once we have connected :) It is a 4 berth dog trailer and unfortunately i don't have a photo of it. I believe that all that is wrong with it is it has a flat tyre that will need replacing

Hi, looking for a surveyor that is able to identify boundary locations for installation of new boundary fences. Located Redwood park

Build a fence to enclose part of yard for 2 dogs

To install a pet gate between a brick house and colour bond fence.

it'll be two sides as the other two side are my house. One side to be 6.4 meters in length and the other side to be 7.4 meters in length. They hight of it should be 4 foot - ish. One side must have a gate. - Due date: Before Monday, 19 February 2024

Fence to contain dogs and not obstruct the view of the surrounding property. about 16m x 13m - Due date: Flexible

2500 mm fence 1300mm high to stop dogs jumping at neighbours fence as they have cats are are annoying neighbour fence if possible house to metal fence long If possible have fence longer and completely block path to fence 1m out - Due date: Before Sunday, 15 October 2023

A fence that can keep a small dog in (spoodle, will grow to be 40cm heigh and 7-10kg). He has just jumped out of a 80cm heigh temporary fence i have currently, so will need to be 1.2-1.5m heigh, very stable and have a gate. Ideally i would like it to be black and see through but open to solid forms if it will keep him in my small back yard area. - Due date: Flexible

Hi I need 9 temporary fence panels and 7 concrete feet picked up from modbury north and dropped off in Warradale. Panels are 2.4m by 2.1m a workmate is usually okay to transport these. - Due date: Flexible

HI, existing fence that we want to extend. Current fence has horizontal colorbound panels. Want to finish it, extra 13m that i have calculate as extra 5 panels and relocating one current panel and fence. Happy to get quotes of the materials and installation or only installation Thanks - Due date: Flexible

I have a wire fence of approx 250m around our house block that I need patched and pegged to keep dogs in and also have a paddock fence that needs some twitching and tightening to keep some cows in. I have the materials and tools required to do the job. - Due date: Flexible

As above gate catches on the slate drive. Probably need some timber shaved from the base - Due date: Flexible asap

I need assistance to complete the install of a dog safe fence, attaching the wires up high and attaching to the house - Due date: Flexible

Exchange collapsing wooden ones with iron. Approx 3 to 4 panels. - Due date: Needs to be done on Monday, 21 March 2022

Needing a front gate installed to contain dogs. Property has the front boundary line fenced but fence stops at cemented driveway. Section needed to be fence/gated is approximately 4 metres in width. Not concerned with style of gate or appearance - just needs to be functional to contain two dogs - 1 small - Bichon Frisse - 1 medium - Labrador cross. Burnside area - open to offers and ideas. - Due date: Flexible

One sheet of fence between 2 posts broken and needs replacement

Install Colorbond Fence – 39m (18 panels) Looking for someone experienced in fencing to install a Colorbond fence in our backyard. • Fence length: 39m • Height: 1.8m • 18 panels (each 2.6m wide) • We already have the posts. • We can supply the concrete. • No removal required – installation is on our side only. Please bring your own tools and equipment. Ideally, you have experience with Colorbond fencing and can complete the job neatly and securely.

3 Sections of Colourbond fence falling over (rusted uprights) Quote required in writing detailing work to be completed

Looking for quotes to install a Colorbond fence, 23m long and 1.8m high, in valley view Please include in the quote: • Supply and installation • Removal and disposal of existing fence Kindly provide cost per metre and estimated time for completion. Thank you.

Supply and completely install colourbond fence. Including installing posts. 6meters x 1.8cm Easy access Would like it done soon if possible Cheers

I’ve dented customers colour bond fence. Looks like post and sheet will need be replaced at least. See photos better look.

Colour bond fence rusted replace bottom 2 x 2.4m horizontal posts , 2 x 2.1 vertical posts and reset into ground with concrete . Fence sheets ok to use. Woodland grey.

We need a lockable gate installed into a colourbond fence. Photos included here but please ask any questions you may have in order to quote.

Looking to have a side gate installed—please provide a quote that includes all materials and labor.

I am looking for a 1.8m high Colorbond corrugated profile sheet metal fence (Woodland Grey color) for the solid side boundaries of my newly constructed house in Roseworthy, Adelaide. The house will be finished in about a month, so I need someone to install roughly 70-80 meters of fencing on three sides of the property. Please provide me with a quote that includes strong sleepers and all materials and installation for the 1.8m Colorbond fence. Thank you!

Hi, I would like to have my existing brick fence demolished and replaced with a new Colorbond steel fence. Details: Fence length: approximately 6.6 meters Fence height: approximately 1.8 meters Scope of Work: Demolish and dispose of the existing brick fence Supply and install a new Colorbond fence using 0.42mm thick panels Install all fence posts with concrete footing Install a gate constructed with matching Colorbond material Prepare the gate to fit an electronic lock (supplied by the owner)

Two colourbond fence panels need to be removed. The fence post between the two panels has come loose and is very wobbly so it needs to be removed (likely replaced?) and reconcreted into the ground. Then the two panels need to be put back in. Some digging and tricky access is required for the fence post concreting.

I have 2 (2.4m x 1.8m) colorbond fence panels that are leaning over and require new posts to secure it alongside existing footings if possible

Colourbond fence posts on one join have become rusted at the footing, the fence is now swaying in wind a bit and causing foundations to loosen. I believe slab needs taken up, 2 posts replaced and then reset with bag of instant concrete

We need a side gate installed between our house and our fence down the side path of our house to restrict access to our side path and retaining wall. We are looking to replicate the gate and panels at the back of the house in the second picture. The original job cost $755 + GST 6 months ago which we essentially just need duplicated.

Fence bent in and split between the post. 1.8m colour bond fence. 4 posts need reinforcing

colorbond fence installation around 95 meters

Color bond fence, with concrete sleepers at base and no post support is wobbling at one joint of two panels.

Tree damaged fence. Approximately 8 panels and capping and some posts need replacing

Side gate latch and hinges were damaged by strong winds and need fixing.