Find experienced local carpenters in SA

【Date & Availability】 Fridays or Saturdays ONLY (Owner will be home all day） ​【Budget】 $800 AUD (Base budget. Experienced carpenters with a proven portfolio are welcome to discuss a revised quote based on workmanship and finish quality.) 【Dimensions (L-shape)】 Main Bedhead Wall: 3.3m wide Right Side Wall: 2.07m wide Height: 2.6m 【Materials Provided】 9 x Oiled Walnut Slat Panels (300cm × 64cm) 1 x Matching Walnut End Trim (3m) 1 x LED Strip Kit (4 strips + transformer) 1 x Clip-on peg shelf 【Scope of Work】 Cut panels from 3m to 2.6m using a track saw to prevent veneer damage. Precise cut-outs for 2 x double GPOs (flush finish required). Conceal low-voltage LED wiring behind panels before installation. Install panels with accurate vertical alignment and clean L-corner joint. Cut and install end trim on exposed edge (260cm). 【Requirements】 Must have professional tools (track saw, laser level, etc.). Please include photos of previous timber slat wall / feature wall projects. Careful handling of premium timber veneer materials. Clean and tidy workmanship required.

SOUTH AUSTRALIA The quote is currently for labour, costs for materials can be added after :) Needing a carpenter to put a simple folding backdrop together. I have all the plans and images ready to supply. It should be a very easy job for someone experienced. I would love for it to be the colour of the wood Ive attached, or the colour in the photo with the brides and ballons. Its for my new wedding business, Memory Line. LABOUR TIME Cutting & assembly: 3-5 hrs Sanding & prep: 1-2 hrs Painting: 1-2 hrs (plus drying time) MATERIALS My research has come to the following Materials cost: Pine framing timber 3 mm-6mm MDF/plywood panel skins 2-3 piano hinges Screws, glue, filler Sandpaper Paint (I have added a photo of the Scandinavian Rustic Grey texture im after) Total for these materials: approximately $145-$290 AUD (I will supply) Any additions please let me know, especially if the paint texture is more expensive

I would like a sturdy door for this existing frame. The pictures illustrate exactly what we would like done. Rather than hinging the door, two handles to lift this section out will be preferred and simplify the task. Is likely to require a visit to measure up, steel frame and timbers fixed and unable to see through. Require good professional finish.

Range hood is different size to the old on that was there. This has left a gap around that I want covered. Was thinking using something like pictured and paint it to match cupboards but open to suggestions.

Motorhome carpentry and cabinetry Someone with experience preferred for: Making fold out bed Draw system Bench seating Happy to get quote for labour and materials Price as just a guide

The advertised budget is for labour only, material costs to be discussed. I’m looking for a capable handyman/carpenter to build a simple portable ticket-booth-style audio guestbook kiosk for my Adelaide audio guestbook business, Memory Line. I have attached an inspiration image showing the overall style I’m hoping to achieve. This does not need to be an exact replica. I would like a simplified, cost-effective version that still looks polished and professional in wedding photographs. To keep costs down, I am suggesting: -simple pine framing -7–12 mm plywood skins -no floor -no working door -basic removable top sign -simple timber shelf -inexpensive decorative moulding The booth will hold a vintage audio guestbook telephone. Guests will step inside OR stand at the opening, pick up the phone and leave a recorded message. Approximate size I am open to recommendations, but approximately: 190–205 cm high 80–95 cm wide 65–80 cm deep large front service-window opening open side entrance The decorative awning shown in the inspiration image would be LOVELY if it can be created affordably. TRANSPORTABILITY ESSENTIAL This booth will be transported to weddings and events, so it must not be permanently constructed as one large, heavy box. It should: separate into manageable panels or sections fit through standard household and venue doorways fit into a ute, van or suitable trailer be assembled and dismantled repeatedly Please include in your offer -examples of similar carpentry or handyman work -estimated materials cost -time frame (before 28th july ideal) -whether delivery to Adelaide’s north-eastern suburbs is included The most important things are that it is safe, attractive, lightweight and transportable. It does not need to be expensive cabinetry or exhibition-grade construction.

Looking for a handyman or carpenter to build a simple portable wooden private booth for my wedding business that I can then decorate/modify if I wish (painting it etc). I have already purchased the complete DIY plans, technical drawings, assembly diagrams and parts list. The design work is therefore ready to go—you will not be starting from scratch. Materials will be paid separately following approval of a written materials estimate and receipts. I am on a tight start-up budget and would appreciate cost-effective recommendations. I am happy to complete some cosmetic finishing or painting myself if this reduces the overall cost. Please clearly separate your estimated labour, CNC cutting and materials costs in your offer. The dream idea is to convert it into a semi-private telephone recording booth: telephone mounted on a narrow shelf inside framed prompts and instructions on the back wall soft fabric, acoustic panels or curtains internally warm overhead lighting (I could do this myself later?) florals and personalised signage around the opening “Step Inside and Leave a Message” across the top TRANSPORTABILITY ESSENTIAL  separate into into flat panels?  has removable stabilising feet?  fits through standard venue doors  has no raised floor or trip edge  uses lightweight plywood rather than heavy MDF -fit in a van, ute or suitable enclosed trailer -include strong, sensibly positioned carrying handles if possible Possible interior additions The main task is constructing the booth itself, but I would also like provision for: a shelf hidden cable management lightweight acoustic treatment attachment points for removable signage or florals These can either be included in the original offer or quoted separately. When submitting an offer, please include: a breakdown of labour and material costs I have attached photos for inspiration PLEASE DONT MAKE IT PINK

Repair rotten timber under window and secure loose vertical board. Bottom timber is damaged and needs partial replacement. Also need to fix and secure the loose panel. Location: Aberfoyle Park

Hi all, needing a stainless steel snorkel installed on my n80 2018 hilux. Happy to come to you. Thank you

Solid wooden kickboard needs to be replaced in kitchen to allow for removal and installation of a new dishwasher

I need someone to come to my place with their tools to cut four wooden table legs to make the table shorter in height

Wanting a floating cabinet across the crease cut please

I’m looking for some help woodworking and carrying a heavy plywood desk up the stairs. I'm wanting to have the desk width sawed 85cm narrower (cutting off the back of the legs & tabletop as indicated in images, to remove the uneven edges), potentially refinishing, and then lifting it up a narrow staircase. Technically the desk does fit. With the 85mm removed the final dimensions would be: 750mm H x 2000mm L x 665mm D, and the hallway is 810mm wide from each skirting board (though the handrail may get in the way). I believe if lifted vertically it could make it around those corners, though I’m not 100% sure as my friend and I were too weak to make a good attempt. If it turns out the desk won’t fit, I’d also be open to having both/one of the legs sawed off so that I can reconstruct somehow it situ (for additional $). It’s just a nice chunk of plywood so I want to make it work asap

4 Timbers need to be screwed on the back (each as, just follow the instructions), and 2 vents need to be swapped around on most the inside (3 screws in each vent). All material and screws are there

Hello I have small job for a retired carpenter or carpenter looking for an odd job to install a u install it (already assembled) draw, shelf x 2 and cupboard into a very small pantry

I have two cabinets doors that that need to be attached as the doors have fallen off again. I recently had someone fix it but it has fallen off so I am guessing the holes on the cabinets are too wide so it’s not just simply screwing the hinges again .

I Need to install the door I will be home during the day today or tomorrow and I can help to hold the door if needed. Send your offer please

I have an L shaped cupboard door thats come off, the bottom screws have snapped into the wall I just need the door back on I'm not fussed if the screws are removed or if you just put them in next to it. As long as its functional as it gets opened and closed hundreds of times a day. Otherwise if you can just put the holes in for the new screws I can reattach it myself, I just dont have the tools I need to drill the holes or remove the screws.

Repair rotting timber as pictured in outside eaves, door of house.

Fix door hinges of kitchen cabinet