Find a fence repair professional in NSW

I need a gate post either repaired or replaced. Its a wooden one which has been cemented into the ground

Need colourbond fence panel installed and install 3 top rails. ASAP

Wrought iron heritage gate needs new brace added to bottom and pivot installed. Post needs to be replaced. Gate needs to be aligned so ball roller works easily, Essential that offers are from those experienced with wrought iron. Offers from previously posted deleted job welcome.

The strong wind destroy part of fence. Need to repair and restore the fence.

Looking for help to repair a brushwood fence. Dimension is 21M (length) and 1.5-1.8M (tall). We are in Wahroonga.

Want someone to extend privacy screen length of house between houses -- Possibly remove part (or all of) old screen and clean away debris and rubbish. (I have several sheets of lattice)

Repair fence pushed/damaged by a tree. Make good the sections of the fence damaged by the tree allowing 50mm clearance between the fence and all parts of the tree. This may require permanent removal of some palings.

The chlorine has corroded the post. I have purchased some materials from bunnings. Mainly Just need labour. Might need to replace a panel also. Not looking to spend more than $600. Also need to put back decorative bamboo panels.

1.) Existing fence has gap underneath that need to be fixed with wood or metal or brick sleepers 2.) supports are extra length that need to be cut to length..

Hi due to the wind my gate latch has jammed to the other side. Can anyone fix this?

Fence repair. Make it in one lane

Replace and fix gate latch - gate in line just needs latch replaced

We have an old fence running along one side of our property for 40 metres and I need the palings reinforced with a nail gun as many are becoming loose. All the palings are intact (no replacements needed) and access is not difficult (aside from pushing through the odd bush!). No ladders needed, no garden clearance necessary and no rubbish removal. I estimate there are approximately 320 timber palings. Each will need up to 4 nails pumped into the upper and lower cross beams (2 in each). I imagine it's between 2.5-3.5 hours work. You will need to supply your own nail gun and nails. Power is easily accessible and decent tea or coffee is available.

Repair gate latch on outdoor gate

Hi I have a side access gate made of colourbond 2m high by about 1m wide. The latch has come away and needs to be re fitted ( with rivets I expect)

My backyard gate came down with the wind.

Small brick fence repair

Front gate needs new hinges, planes on either side and a new latch. Cost of latch not included, we can purchase on our end. Need completed by Monday as dog keeps escaping!

Please make the following adjustments to the side path gate: 1. Relocate the Gate: Move the gate approximately 1 meter back towards the pavers. It was originally implemented in the wrong location and it's now broken. It can replace the new temporary gate which you can see in the first photo. 2. Replace the Gate: Swap the current blue gate (seen in the last two images) with the replacement gate shown in the first image. 3. Apply a closing mechanism: The gate doesn't have a mechanism for holding shut. Please add a simple closing solution so the gate actually stays closed.

I need a skilled concreter or handyman experienced with small patch repairs to fix damaged edges and post bases on my driveway, before a Spray Crete resurfacing job on Wednesday (weather permitting). The repairs must be completed on this Tuesday (weather permitting, weather forecast seems to suggest sunny) so the new resurfacing spray crete can be applied the next day. Scope of Work: 1. Repair damaged sections along the driveway edge and around fence posts (see attached photos). • Fill and rebuild edges where concrete has chipped, broken, or eroded. • Shape edges to match the profile as closely as possible. 2. Material specification: • Use Rapid Set Cement All for patching (available from Blacktown Building Supplies), unless you have a strong reason for an alternative (please explain if so). • Use a suitable bonding agent (e.g., BondCrete) to ensure proper adhesion. • I can provide the Rapid Set Cement All and BondCrete, unless you have your own supply. Quote should exclude these if I buy them. 3. Surface preparation: • Remove loose concrete, dirt, and debris from each repair area. • Apply bonding agent according to manufacturer’s instructions before patching. 4. Finishing: • Smooth and shape the surface to blend with surrounding driveway. • Ensure patch is fully cured, level, and solid before resurfacing crew arrives the next day. Repair Locations: 1. Circular cut-out around gate post – fill and blend to match driveway level. (Photo 1) 2. Broken edge beside gate post – rebuild flush with driveway. (Photo 2) 3. Large corner break near opposite gate post – rebuild missing section to original height and shape. (Photo 6) Notes: • Driveway resurfaced on Wednesday (unless it rains), so timing is critical. • Job completed to a standard that allows resurfacing. • Please bring your own tools for concrete mixing, application, and shaping.