Find a fence installation professional in Blacktown

15 m frontage 10.5 m fence 4.5 m sliding gate materials will be provided including fence and gates

I’m looking for an experienced fencing/gate installer to supply and install two WPC/composite side gates at a new house in the Blacktown/Toongabbie area. Gate 1 – Single * 1500 mm wide × 1800 mm high * Single-leaf swing gate * WPC/composite panels * Aluminium frame and posts Gate 2 – Double * 2700 mm wide × 1800 mm high * Double-leaf swing gate * WPC/composite panels * Aluminium frame and posts Please quote for: * Supply of WPC gates * Aluminium frames & posts * Hinges * Locks/latches * Drop bolts * Concrete footings * Installation * Delivery * GST * Any other required materials I’m after a modern wood-look WPC finish, preferably a dark timber colour, with both gates matching. Please provide an itemised quote for each gate and the total installed price. Photos and site measurements can be provided to shortlisted Airtasker professionals.

Need to install a gate which is about 1250mm

I’m looking for an experienced fencing professional to remove an existing wooden fence and install a new Colourbond fence approximately 15–16 metres long. Scope of work: * Remove and dispose of the existing wooden fence. * Establish a new fence line approximately 300mm away from the existing fence. * Install the new fence along the new alignment. * Fence length is approximately 15–16 metres. * One side only. * Supply and install new Colourbond fencing, including posts, rails, sheets/panels and concrete footings as required. * Ensure the new fence is straight, level, secure and properly finished. * Remove all old fencing materials and construction waste from site. Important: The new fence is not being installed in the existing fence line. It needs to be shifted approximately 300mm from the current fence, so please allow for this when assessing the job and pricing. Please include in your quote: * Labour and materials * Removal/disposal of existing fence * Colourbond fence supply and installation * Concrete/post installation * Any additional costs associated with creating the new fence line I can provide photos and access details to shortlisted Airtaskers. Approx. length: 15–16m Fence: Colourbond Sides: One side only New alignment: 300mm offset from existing fence line

Supply and install lattice to perimeter of deck and house. Need a little latch door to be installed with lattice panel to be able to access under the house Red markup in photos shows where we need lattice installed. Potential to add a balustrade around the deck too, would need to chat about this in person. Price I’m offering is estimate. Would need to paint lattice white.

Install the sleepers underneath the bottom rail of the sheet fence, trim the top part of the sheet to align with the two posts, and re-install back the top rail on top of the newly cut sheet. 2 Sleepers from bunnings: • 1 for Front fence- 200mm x 50mm x 3.0m, cost $30 • 1 for Side fence - 200mm x 50mm x 2.0m, cost $25

1. Takeout old fence and reuse the panels only 2. Need to use new railings and posts of same Color and pine sleepers for base Height should be same 1.8 m Total length is approx 24 meter 3. For around 4 meter one pine sleeper will be required and remaining 20 meter length two pine sleepers with steel support will be required due to slope of ground 4. Old posts and railings need to be taken away I can advice on the new boundary line which need to be marked for installation . I have marked red line for reference where the new installation should take place. See the picture

Need to remove old fence and install new one colourbond fence Length is 23800 Height is standard

Hi, I need a handyman to supply and install a dual-sided gate latch (like a D&D LokkLatch Deluxe) on an existing metal side gate and metal post at my home on Mary Jane Parade.The latch needs to open from the outside and have the option to be locked from the inside.I am currently away from the gate but will upload clear photos of the metal frame, post, and gap tomorrow morning so you can see the setup.Please provide an estimated quote for labor + supplying the lock hardware. Thank you!

Looking for a supply and install of one straight line of colourbond fencing with single lockable gate to divide a yard for my elderly mother. Monument colour see photos for profile, straight line 180 high snd approx 6-7 metres across.

28 Panels. Clean & Clear: Remove any existing pigeon nests, debris, and droppings from underneath the solar panels before installing the mesh. Install Mesh: Install PVC-coated galvanized steel mesh around the outer perimeter of the solar panel array. Side-by-Side Overlap: Mesh sections must be installed side-by-side with a 2-3 square overlap at the joints to ensure there are absolutely no gaps. No Drilling: You must use non-invasive solar panel clips (no drilling into the frames to avoid voiding the warranty). Mould to Roof: The bottom of the mesh needs to be neatly contoured and flush against the roof profile so birds cannot squeeze under.

I want to install side gate to both side of the house

Needing 6 dented Colourbond panels replaced, frames are fine and can still be used . Each panel is 2.4m long .

Remove and replace side gates

I’m looking for an experienced installer to supply and install Colourbond gates at my new home in Grantham Farm, NSW 2765. Scope of work: • Side 1: Supply and install one Colourbond gate approximately 930 mm wide. • Side 2: Supply and install either: • One wide Colourbond gate, or • Two Colourbond gates with a fixed side panel, depending on what is most practical. • Total opening width is approximately 2783 mm. Requirements: • Supply all materials, posts, hinges, latches, and fittings. • Colour to match existing Colourbond fencing (please advise available colours). • Ensure gates are level, secure, and operate smoothly. • Remove any waste and leave the area clean after installation. Please provide: • Your recommended gate configuration for the 2783 mm opening. • A quote including supply and installation. • Estimated timeframe to complete the work. • Photos of similar Colourbond gate installations if available.

From drive way fence along the side fence

Need a fence about 10-12 metres with a gate For a dog enclosure. It will come 2 meters off a colour bond fence on the ends and a 6 metres across with a gate Dirt ground and easy access 1.2 high pool fencing

Need picket garden fence or rapid fence installation for 15m length

The D-latch handle on my metal gate is broken and needs to be replaced. Please supply and install a compatible replacement D-latch handle (black colour) and ensure the gate operates correctly. Photos are attached.

Subject: Repair of an Old Wooden Fence – Install Two Additional Aluminium Support Posts My approximately 20-year-old wooden fence has started leaning outward and requires repair. Please see the attached photos for its current condition. In my opinion, the issue may be resolved by installing two additional aluminium support posts to strengthen and stabilise the fence. However, I welcome other repair suggestions from experienced contractors if there is a better or more cost-effective solution. If you are interested, please let me know your proposed repair method, estimated cost, and availability. Easy access is available from the street.