Find a fence installation professional in Schofields

I need a 10m security/aluminium fence installed with a pedestrian gate too in my property.

I am after a 30m fence supply and install with a 6m sliding gate + pedestrian gate too. Aluminium slate Security fence is okay too

28 Panels. Clean & Clear: Remove any existing pigeon nests, debris, and droppings from underneath the solar panels before installing the mesh. Install Mesh: Install PVC-coated galvanized steel mesh around the outer perimeter of the solar panel array. Side-by-Side Overlap: Mesh sections must be installed side-by-side with a 2-3 square overlap at the joints to ensure there are absolutely no gaps. No Drilling: You must use non-invasive solar panel clips (no drilling into the frames to avoid voiding the warranty). Mould to Roof: The bottom of the mesh needs to be neatly contoured and flush against the roof profile so birds cannot squeeze under.

Boundary Wall & Railing Installation – Corner Property I’m looking to build a combined low wall and railing boundary fence, as shown in the attached photo. The property is a corner block, so the new boundary will need to be designed and positioned carefully to comply with the applicable council/property boundary, visibility, setback and corner-lot guidelines.

Hi, I need a handyman to supply and install a dual-sided gate latch (like a D&D LokkLatch Deluxe) on an existing metal side gate and metal post at my home on Mary Jane Parade.The latch needs to open from the outside and have the option to be locked from the inside.I am currently away from the gate but will upload clear photos of the metal frame, post, and gap tomorrow morning so you can see the setup.Please provide an estimated quote for labor + supplying the lock hardware. Thank you!

I’m looking for someone to help change the opening direction of a side gate in my backyard. The gate was originally hinged on the right side, and I want to change it so the hinges are on the left side instead. The gate has already been removed, so it will need to be reinstalled with the hinges moved to the other side. New screws will likely be needed, so please bring suitable screws and tools. The gate itself is in good condition. Location: Tallawong. Flexible with timing. Budget negotiable. Photos can be provided if needed.

Task description: Hi, I’m looking for an experienced fencer/handyman to install pre-made white aluminium picket fence panels (with gaps) from Bunnings (or similar) at the front and sides of my house. We will purchase and supply all materials — I need labour + installation only. Fence style (pre-made panels): • White powder-coated aluminium picket panels (like the Bunnings “Aluminium Boundary Fencing & Gates” range) • Pickets with gaps (open style) • Height: ~1.2m (or closest available panel height) • Gate opening: 1.10m Measurements (approx.): • Side (left): 5.70m • Side (right): 6.30m • Front right section: 4.10m • Front left section: 4.80m • Gate opening: 1.10m ✅ Total fence length (excluding gate): 20.90m Scope of work (install only): 1. Confirm measurements and panel count on site 2. Mark the fence line (I will share photos with red markings) 3. Install fence inside our property boundary (not on the boundary line) 4. Dig post holes and set posts with concrete 5. Fit panels straight and level, including corner joins 6. Install 1.10m gate (hinges + latch), ensure smooth operation 7. Clean up and leave area tidy (stack leftovers neatly) Materials we will supply (Bunnings pre-made system): • Pre-made white aluminium picket panels (quantity based on panel width) • Matching posts (end/line/corner posts) + post caps • Gate panel/kit (1.10m) or matching gate from same range • Hinges + latch set (if not included) • Brackets/rails/connectors as required for the system • Screws/fasteners (galvanised/stainless) • Concrete for posts (rapid set) What you must provide: • All tools (post hole digger/auger, level, drill/driver, cutting tools if needed) • Experience installing aluminium panel fencing (preferred) Location: Tallawong NSW 2762 Budget: Please quote (labour only) When: Flexible (weekends/weekday)

Build an.iron gateat the entrance of the house

I would like to have a 2.2-metre double-fold clothesline installed in my backyard. The clothesline will need to be secured into the ground. Please provide me with a quote for supply and installation.Thank you

At the backside of the house, I need to install a 13-meter timber/colorbond fence, which includes a gate of about 2 to 2.5 meters. * Total length: 13 meters * Fence length: 10.5–11 meters * Gate: 2–2.5 meters * Height: 1.8 meters Please provide me with a quote for timber and colorbond fences, including supply of all required materials.

I want a fence installed at the side of the property with a gate. The length of the space is 10m and i am after 1.2m high fence. Aluminum or white timber fence is fine

Install 5* decorative screen panels like the picture - on top of exisiting colour bond fence. I wil supply the decorative screens, rest will be yours(labour + any material like screws etc) .

I want help installing a garden fence. Need to look nice and secure. Length 10m including gate Height 1.2m

I have got a dual side key lock from Bunnings, need someone to install it on the backyard fence gate, attaching pictures. Quotes please…

Colorbond Side gate to be installed - i will supply the gate One side post is already there, the other needs to be installed - i will supply the post You bring your skill and other material (concrete etc)

Hi there, We are looking for a Fencing contractor to install a Colourbond fence on our vacant land in Schofields, NSW. Happy to meet & assess on site. Quotes appreciated as we are keen to get the job done. Thanks Kind Regards, Nat

Replace an old Colorbond fence with the new Colorbond at the back of the house, approximately 18 meters length and 2.1 m height. Please include your quote with colorbond and labour cost.

Gate repair/replacement of latch

Need to install fence extension. Need suggestions of ordering the right product too. Attached the image. Need just 2 fence extension above the 2 fence below the pargola. Looking to add 2 aluminium slats..600mm height.

Full fencing of about 80m. Material type to be used: Hebel fence or anything that looks flat - Due date: Flexible