Find a fence installation professional in Ryde

Remove , supply and install a backyard timber gate , 1.8 mx 600cm.

I would like to install a gate in my back fence. It’s a reserve behind the fence. You need to bring your own tools and material to match the fence. Thanks Hetal

I need my glass pool gate latch adjusted or replaced if needed so I can get a pool compliance certificate. Urgent job, need someone today or tomorrow

Looking for an experienced fencing/gate installer to replace an existing steel side-access gate at a residential property in Sydney. The surrounding COLORBOND-style fence is in reasonable condition and does not need replacement. However, the gate frame is rusting badly at the bottom, and the hinges and latch are also corroded. Scope of work: * Inspect existing gate and mounting posts. * Supply and install a new gate of the same or similar dimensions, design and cream colour. * Supply and install new corrosion-resistant hinges, latch and associated hardware. * Use durable, weather-resistant materials suitable for long-term outdoor use. * Check gate alignment, clearance and smooth opening/closing. * Remove and dispose of the old gate and hardware. * Retain the existing surrounding fence and posts wherever practical. Preference: Complete gate replacement rather than temporary rust repairs. Open to recommendations on galvanised/powder-coated steel or aluminium construction. Looking for someone who regularly supplies and installs metal pedestrian gates, has access to suitable suppliers, and can arrange a correctly sized gate with matching colour and finish. Please provide an estimated all-inclusive price for materials, installation and disposal, and examples of similar work. Photos attached. Measurements can be provided or confirmed on site.

Install Supergates pedestrian gate and posts

Timber Fencing Supply & Installation (1.8m Treated Pine Lapped & Capped) – 24.36m Total Posted price is a placeholder starting estimate (Supply & Install). Please submit your actual counter-offer Easy flat access and install Finished New Fence to match newer fence in images. Task Description: Looking for an experienced fencer to supply and install new timber fencing at my property. Total fence length is 24.36m at 1.8m high using treated-pine lapped-and-capped timber paling. Please review the two options below and provide 4 separate line-item total prices in your offer/comments so I can compare options. Scope Breakdown 1. East Boundary (16.65m) Option A (Full Service): Remove and dispose of existing timber fence + supply and install new 1.8m treated-pine lapped-and-capped timber paling fence. Option B (Supply & Install Only): Site cleared and old timber fence removed by owner prior + supply and install new 1.8m treated-pine lapped-and-capped timber paling fence. 2. Rear Fence (7.71m) Option A (Full Service): Remove and dispose of existing fence + supply and install new 1.8m treated-pine lapped-and-capped fence with a timber plinth board along the bottom. Option B (Supply & Install Only): Site cleared and old fence removed by owner prior + supply and install new 1.8m treated-pine lapped-and-capped fence with a timber plinth board along the bottom. (Note: Existing fence is to be removed/disposed of entirely, not salvaged.) Quote Requirements In your response, please ensure you: 1. Provide 4 separate total prices for: East Boundary – Option A East Boundary – Option B Rear Fence – Option A Rear Fence – Option B 2. Specify timber treatment level (e.g., H3 / H4) and product specifications (post sizes and centres, palings, rail details). 3. Confirm you can commence work within 4 weeks. Prompt offers are greatly appreciated! Looking forward to working with a reliable contractor. Please feel free to ask any questions

Hi, I’m looking for a quote to replace the front fence and both side gates/fence sections. Looking for aluminium classic picket The approximate measurements are: Front fence * 12.6m total length * Approximately 1.2m high * There is a tree that slants into the fence line. I’m thinking the fence may need a post immediately before the tree and another immediately after it, with the fence designed around the tree. Left side of house * 2.4m long * Height to be increased to approximately 1.6m Right side of house * 2.8m long * Height approximately 1.6m * Existing footing is unstable and the fence is leaning towards the neighbour’s property, so the footing will need to be removed/redone and the post properly reinstalled. Please include in the quote: * Removal and disposal of the existing fence/gates * New posts and concrete footings * New fence panels * Front and side gates * All hardware, hinges and locks * Any additional work required around the tree * /cleanup after installation

Install a new 28 meter 1.8 meter height colorbond fence and a gate that owner provided

7 hours labour on 1 day. Install a new stainless steel wire fence between existing wooden poles, about 10m Remove old wooden fence Minor repairs to deck Expect tradie to have done wire fence before, give advice. I will supply materials and tools but tradie may prefer your own tools. I will assist & run to Bunnings as required.

The corner section where the 2 sides join are installed crooked. Need to reinstall straight. Plus material.

I need a metal gate installed. I have the gate.

Requiring qualified contractor (landlord request) to install a dual fence lock at backyard fences

Hi, I need an experienced handyman or fencer to help with install green metal gate using existing post + fit MagnaLatch pool safety lock. Ideally, you can utilize, modify, or securely re-fix this existing green post to hang the gate, ensuring it opens and closes properly. • Fixings: Please bring your own heavy-duty hinges (self-closing spring hinges preferred for pool areas) and suitable metal screws/fixings. Requirement: Must be installed in compliance with Australian pool safety standards (correct legal height and self-latching operation). Please reply with your availability and an all-inclusive quote. Thanks!

Supply & install galvanised steel welded dog mesh (rigid not rolls), preferably black or brown, openings 50mm x 50mm, wire diameter 3-4mm. Attach to existing metal balustrade fence to prevent dog escape. Length approx 12m, height 1.0-1.1m from top of concrete at base to top of horizontal fence top.

Feature Fence Installation - I have a back colorbond fence that requires transformation. I would like quotes ASAP and job to be completed within 2 weeks. Image (before) and desired outcome (after image). Fence dimensions: 15 meters x 1.8m What we have: 7 meters, 1 meter apart 7 x Wooden post already in concrete. These can be used to secure the panel. The remaining sides, require (either new posts) or I am very happy for wooden posts to be secured directly on the colour bond fence (creating tiered fencing). Stone Panels in center: Need liquid nails to secure on existing panel: https://woodflex.com.au/products/woodflex-flexible-pu-stone-panel-stary-stone-white-1200-x-600mm 2.4m x 1.8m height Wood Fluted Panel Installation: https://buildersexpressnsw.com.au/product/teak-black-outdoor-fluted-decor-panel/ 12.6m x 1.8m height Prefer to be laid horizontal if it can hold the weight, or vertical if that is the only way it can be laid (let me know how it should be best laid). Request for quote for installation please. Looking to get job done before plants go in the next 2 weeks.

Feature Fence Installation - I have a back colorbond fence that requires transformation. I would like quotes ASAP and job to be completed within 2 weeks. Image (before) and desired outcome (after image). Fence dimensions: 15 meters x 1.8m What we have: 7 meters, 1 meter apart 7 x Wooden post already in concrete. These can be used to secure the panel. The remaining sides, require (either new posts) or I am very happy for wooden posts to be secured directly on the colour bond fence (creating tiered fencing). Stone Panels in center: Need liquid nails to secure on existing panel: https://woodflex.com.au/products/woodflex-flexible-pu-stone-panel-stary-stone-white-1200-x-600mm 2.4m x 1.8m height Wood Fluted Panel Installation: https://buildersexpressnsw.com.au/product/teak-black-outdoor-fluted-decor-panel/ 12.6m x 1.8m height Prefer to be laid horizontal if it can hold the weight, or vertical if that is the only way it can be laid (let me know how it should be best laid). Request for quote for installation please. Looking to get job done before plants go in the next 2 weeks.

We would like colourbond or aluminium gates on either side of our property - approx 2m on one side and 1m on the other

Supply and install a new garden gate about 1.5-2m width

Timber fence installation including removal of existing fence on front boundary

See photos. Need handyman’s help installing fence pickets for around 11 meter length. 1st photo showing where and 2nd photo showing which type I will provide all material, just quote for labour. Need to get it done before Fri 1st May at the latest