Find a fence installation professional in Sydney

Location: Redfern When: Flexible I need an experienced fencing contractor to supply and install a black front enclosure with double gates. This is for a small area behind a parked car. Only the front section is required, as both sides already have existing enclosures. Specs: • Black fence-style enclosure • Double swing gates (lockable) • Approx. 2.5 metres wide • Approx. 2 metres high • Must be durable and weather-resistant • Must match or be similar to typical black steel/aluminium fencing What you will provide: • All materials • Labour for installation • Measurements and recommendations (if needed) • Hardware, posts, hinges, and fixings • A clean, safe, professional install Looking for someone who has: • Experience with metal / steel or aluminium fencing • Ability to supply materials and complete install • Examples of previous similar work Please quote for supply + install, and feel free to ask for photos or an inspection if needed.

replace an existing 6 metre timber side and 7 metre colorbond rear fence with new colorbond fence. Sleepers will be required due to level difference between properties (a single row along the rear fence and 2 rows along the side fence). Also require the existing fences to be removed. A small brick wall (2 bricks high) also needs to be removed along the rear boundary.

Collect two timber fences (one 4m, one 2m) Remove old fence Install new fence Recycle old fence

Remove existing timber fence. Install new treated pine fence. 4 sections. 5 posts. Approx 26 fence slats per section. New runners for length of fence.

I need a bracket supplied and installed on the back gate and I need the remaining one secured. I’ve included the existing one in photos. The wind puts a lot of pressure on the gate, and the temporary one installed last week didn’t last an hour without breaking.

The wind knocked down the old gate so we need a new one by the side of the house. You need to supply and install

Remove existing and Install new aluminium gate about 2.2m(w) x 1.8m(h)

Need a picket fence repaired/replaced ideally as soon as possible.

Just looking at installing a gate at the side of our home. It's approximately 1 meter in width. But a gate gas never been there before so will need to do whole installation. Looking for best quote

Need to dismantle as needed to replace two fence posts and reinstall gate and dismantled fence. See photos

To rebuild a brick wall and front gate. See pictures attached of damage and also original fence. Both standing sides of brick still very solid. Left side of the brick fence is 1540mm Right side is 1240mm Gate is 900mm Wide

Replacement/repair of terrace house front fence and 2 x gates.

a wooden gate post needs to be repaired or replaced

Work Description: - Cutting and installing sound proofing panels in three (3) meeting rooms of the Second Level. - Total of panels installed: 18 Days of work: Friday 3th October Friday 10th October Tuesday 14th October Thursday 16th October Friday 17th October Job has been completed! Quotation includes parking tickets and Bunning purchase as detailed below: - Parking Tickets $ 83.2 (see picture attached) - Bunnings Caulking Gun $ 12.5 (receipt already provided) 1.9% App fees included. - View all the details of this offer: https://www.airtasker.com/offers/01K7RM8J54BX915KNX90KMFQ4R

Install 2x 1.8m high x 0.9m wide timber gates side by side on side of house. I will supply gates, gate latch, gate hinges , posts and screws for you to install.

Install 2x 1.8m high x 0.9m wide timber gates side by side on side of house. I will supply gates, gate latch, gate hinges and screws for you to install. You provide and install posts and bolts/anchors for posts

Remove and replace the Blueboard panel with new Blueboard panel 6.0mm thick .The size is 2.2 x 1.1 metres. The frame of gate is 40mm tube steel. The hex head screws have to match other gate panel positions that is beside it.( 2 SLIDING GATES ) Paint match inside (Backyard )Exterior ColourBond and match exterior Porters Limwash Terracotta .The second gate will have to be painted in Terracotta limewadh to match as it is faided from the sun . Rear lane access and parking at rear lane .

I’d like a new fence installed at my property in Mascot. Im open to ideas but possibly a high white picket fence ? Details: Approx 8 m of fencing along the front boundary Approx 3 m down one side boundary 1 x 90cm pedestrian gate to match (inward swing, standard latch ) Height: 1.2 m max (to stay within exempt development rules — no DA required) Remove and demolish existing low brick fence Take away all debris / rubbish from site Supply + install (materials, posts, rails, hardware, latch, concrete footings) Neat, professional finish Budget: $2,250 (all-inclusive: materials, labour, demolition, disposal). Timing: Flexible, b4 xmas. Location: 78 Johnson St, Mascot NSW Note: Photo attached for style reference idea only.

We have a small section entering the side of the house which needs a gate with a lock installed for privacy and security. Ideally this is a colorbond gate. You will have to provide the gate and install it. The price has taken this into account. It is around 245cm length and needs to be high.

Install a PVC hamptons panel fence (3 large panels) along boundary line. The current fence uses poles in soil which will be the same system as the new fence Pictures of fence that needs to be removed and the product I would provide (have not purchased yet as open to suggestions from the airtasker if there is a similar product that you prefer). The panels are 2450mm wide including posts, so one will need to be cut to size, which I have confirmed is doable on this type of fence. This is advertised as a DIY fence, more info can be found about it under Outback Fencing Hamptons Privacy PVC Fence. Feel free to request more pics or details. The fence will consist of two posts that connect to brick walls and two internal posts that will connect the 3 panels.