Find a fence installation professional in North East Melbourne

Remove old pad-bolt and install a new one on a gate.

Automatic gate installation only Scope of works Weld existing double gate to single gate Pour concrete plinth Install D5 evo smart per operation manual All material supplied

The two Aluminium doors are 1200mm W × 2000mm H each. 4 Posts: 3 posts × 2600mm H (in ground) 1 post × 2000mm H (bolted against brick wall)

I need a weathered wooden fence to be replaced and the old one disposed of. Length is 35 metres

Require a gate hung and a small piece of fence built. - Gate is 1480 wide - Area is 2480 wide - Require approx 1m of fence built - Post is need in the dirt next to the concrete to hang gate off of. Another post is needed on top of the concrete for gate to latch into Will provide all materials + the gate Pics attached of the gate and the area. The green line is where the post will go. Pics taken from back of house Gate is to swing towards front of house

I have a wooden fence that is leaning, I need the fence post replaced and the fence lean to be straightened out please

Approximately 85lm of fencing required, needs to be timber fence with no gates You will Need to dispose of existing fence

This is what ChatGPT reckons…. 1. Remove the old post and clear the mulch and debris from around the hole. 2. Install a new treated pine post set in a proper concrete footing, plumb and crowned at the top so water runs off. 3. Rehang the gate on the new post, 4. Ensure gate swings shut and latches by itself every time. 6. Take away the old post and rubbish. Please note: • This is a pool barrier, so the gate must self-close and self-latch when finished .

Install Either a large gate or two gates that open up in the main fence panel here. With a way to lock this with a latch or bolt. Using existing fence panel or adding a simple gate in. Very basic space so not looking to spend too much. But would like to be able to open up the width of the panel occasionally for access.

Need this small section of fence replaced and old fence taken away please

Hi Looking for someone to come and install a new wood slat fence for us at the front of our house. The size is relatively small at 2.4m (coming off the front wall in the image) by 2.54m (coming across from the existing fence on the right and meeting at the corner of the bush in the image). Also want a gate on the wall side of the fence to allow for easy access to the back of the house. Any questions please let me know.

The boundary fence is in need of repair or replacement. It divides two separate strata titles (two on each). I will need quotes to show the other properties. The fence line is just under 30 metres.

Hi all I’m looking to get our current outdoor gate replaced with a new basic sturdy gate. I have someone that can demolish the gate already. I just need someone who can order, supply and install a new gate. A gate as basic (affordable price) as possible which also ensures sturdiness and privacy is wanted to be installed. Please provide your offer for inspection, supplying the gate and installation and also rubbish removal We would like you to inspect the gate in person also so that you are sure of the job and we are all on the same page of what’s required It has not been demolished as of yet Timber or colourbond materials preferred Measurements of gate: Width - 2800m Height - 1430m Same height and width for new gate is also ok, nothing shorter in height please :) Thank you!

Install perforated pool fence. Materials supplied 16m with gate.

Based on original job description

One wooden post has become wobbly and is making the fence lean a little so we need it replaced before the fence falls more. Post is possible rotten at the bottom.

A section of treated pine fence (standard 1.65m height) has fallen over. It needs replacing. The house will be sold shortly so I need minimal damage to surrounding area and the sooner the better. Fence length approximately 7.5m. Price offered is per metre.

Removal and reconstruction of a 21-meter timber fence.

We need the old wooden fence removed and disposed of as it’s not functional. Following that, we would like a new fence with gated access installed and aligned to the front of the house. Fence should be tall enough to prevent family dog from jumping over. We don’t have a preference on material (wood, colourbond) just looking for the cheapest option.