Find a fence installation professional in North East Melbourne

Will provide accurate measurements + photos after the 22nd as I am away - posting to see if anyone is interested in doing it. Removal of existing timber fence and posts, new timber one to be built in its place. We’re wanting the whole thing replaced it is roughly 11-12 meters long. The Fence on the rear boundary of our property. Height to suit neighbouring fences.

Hi. Needing a colour bond fence installed only 11 panels in total. Have panels just need install Thanks

I'm after a quote to install a front driveway gate and fence which needs to be max 1.5 metres high. Preferably one with max privacy that's also see through. Looking for either electronic or not depending on price. Thanks

Looking for supply and install of a single gate in the side passage of our property in Wollert. The passage runs between the house brick wall and the timber boundary fence on the south side. Gate specifications: ∙ Width: approx 900mm (passage width — please confirm on site) ∙ Height: 1.8m to match existing timber boundary fence ∙ Material: Aluminium or Colorbond steel preferred. No timber — needs to handle heavy wind without warping, rotting or rattling. Open to suggestions on best material for this location. ∙ Style: Flat panel or slat style, no gaps preferred for privacy and wind resistance. Solid panel will cop less wind stress than an open slat design. ∙ Colour: Something that works alongside red brick house and timber fence — charcoal, monument or woodland grey would suit. ∙ Hardware: Heavy-duty self-closing hinges rated for wind, D-handle with key lock both sides. Gate must open inward (towards rear yard) so it doesn’t block the passage. ∙ Frame: Gate posts to be fixed into brick wall on one side and timber fence post on the other. If existing fence post isn’t strong enough, include a new steel post in the quote. The passage has an A/C condenser and heat pump nearby so access is a bit tight. Site photos available showing the passage width and mounting points. Property is a new build in Wollert which gets very windy — durability and low maintenance are the priority over aesthetics. Please include quote validity and estimated timeline. Happy to bundle with other works on the property if pricing works out.​​​​​​​​​​​​​​​​

Looking for a quote for a fence and gates for the below? The fence we would be looking for is roughly - 10.2m x 6.05m - looking for something along the lines of an aluminium flat blade fence or something similar. Open to options to keep the cost down - black colour - approx 150cm in height - also need a gate at the front of the street and the also a gate at the side - located in Reservoir. The pictures The pink indicates where would be fence and the blue would be where gates go

Build new home fence need a quote

Experienced Glass Pool Fence Installer Needed – St Andrews 3761 Looking for an experienced and qualified installer to install a glass pool fence in St Andrews (3761). Details: • 8 glass panels • 1 glass gate • Spigots supplied • Approx. 13 metres total • Straight run Must have experience with frameless glass pool fencing and ensure it meets Australian pool safety compliance standards.

Hello, I would like Fence Extension timber lattice to be installed over my fence. We will need 4 panels of 2.4 metres long trellis. Materials to be purchased and installed by the Tasker. Location- Macleod. Access is available from both sides.

I’d like an inspection and accurate quote to replace a backyard fence. - Length: Approx 20.3m: 16.8m shared with one neighbour, 3.5m with another neighbour. Old fence: - Remove and dispose of old fence, made of pieces of metal sheeting and other things (see photos attached) - It’s overgrown at one end with ivy that will probably need to be removed. - Has some pest trees half way. Would like to know if fence can be replaced *without* removing the trees. New fence: - Concrete cuts to support new posts - Supply & install standard timber paling fence (1.95m high?) - Hardwood posts - Treated pine rails / palings & plinth Quotes from experienced fencers only please, with relevant quals/registrations, ability to split invoices (to share cost with neighbours), etc. Airtasker payment offered for visit and a good quote only. Thanks,

Hi there, I have remote operated closing gates however the rubber door stopper that’s attached to the concrete driveway has chipped off and because of warrant there it can no longer stop the door correctly. The work is to remove the old stopper and replace it with a new one. I have ordered the replacement already same size so should be on its way shortly. If any adjustments are needed to be done with the alignment of the stopper then it will have to be considered.

See details here: https://www.airtasker.com/my-tasks/quote-to-replace-a-fence-x01kgydke6e2134nka55vbhs8nb/

I’d like an inspection and accurate quote to replace a backyard fence. - Length: Approx 20.3m: 16.8m shared with one neighbour, 3.5m with another neighbour. Old fence: - Remove and dispose of old fence, made of pieces of metal sheeting and other things (see photos attached) - It’s overgrown at one end with ivy that will probably need to be removed. - Has some pest trees half way. Would like to know if fence can be replaced *without* removing the trees. New fence: - Concrete cuts to support new posts - Supply & install standard timber paling fence (1.95m high?) - Hardwood posts - Treated pine rails / palings & plinth Quotes from experienced fencers only please, with relevant quals/registrations, ability to split invoices (to share cost with neighbours), etc. Airtasker payment offered for visit and a good quote only. Thanks,

Install a fence gate along with a fixed panel on the side of my property. The door to be 1500mm wide and fixed panel to be 500mm wide. I want both panels and door to be 1800mm high. I want colour bond to be used. I want supply and install.

Replace 3 posts on a picket front fence

We require 50m of black chainmail fencing to replace a farm fence. Materials Extra.

My temper fence is falling and want it replaced with color bond one . About 38 meter length. The job will include removing and getting rid of the old fence and installing a two meter high top quality page colour bond fence.

I would like a quote to build a 1.8m capped pine timber fence with a gate for a trailer and a side gate. About 17 meters all up.

Need gate latch installed. I have the latch and screws, just dont have the right drill / bit

I need a handy person who will remove bamboo screening which is installed on a steel frame as well as the bamboo screening which makes up a gate. I want it replaced with a product called Ecodeck. This will be screwed on to the steel frame which already exists and also to install this product for a gate. All up you will be installing around 9 metres of purchased product in ready heights on to the steel frames and cutting a hole for the gate opening. I will attach the pictures below.

Collapsed fence at rear of property needing replacing. Looking for standard no-frills 1.8m tall paling fence. Approximately 8.7m in length. Feel free to quote for building of new fence, removal and disposal of collapsed fence, or both. Already have agreement with adjoining neighbour.