Find a fence installation professional in South Brisbane

See photos. I need a gate and fence removed (pool style fence/gate), and I need a new gate installed and two Tuscan Panels attached to the cement flooring with dynabolts and the panels to be attached to pool poles with metal screws. The gate already has holes and screws included, but the Tuscan Panels and sides of pool poles do not. I do not have the dynabolts and metal screws for the panels/poles so you will need to provide them.. and have the right tools to attach everything together including into the cement flooring.

Bulding a fence 12.5m long. Need a colour bond fence.

Dig holes, put 7 fence posts and cement in holes. Attach fence to posts to stand straight. Use two 3m and five 2m hardwood bosts (total 7 posts). Please quote supply materials and labour. Located Woolloongabba.

Dig holes, put fence posts and cement in holes. Basically put new post next to the old posts. 7 posts in total. Located in Woolloongabba, Brisbane.

Looking for someone to build a gate for our kids sand pit. Similar to the mock up pic but the gate will need to push in.

I need my 32-meter fence replaced with a Colorbond fence.

Wanting someone to replace old stump with new one

Pool fence installation. I have some existing glass with spigots and will likely need a couple of additional glass panels and some aluminium fence along the back too.

Hyundai I30 front panel replacement All panels supplied minor panel bearing required

Builders labourer needed for various tasks. Cutting timber, mixing concrete, digging etc For this Saturday 9am to 4pm

Lattice privacy screen to prevent people from the street seeing in through front door; needs to be painted to match the outside paint colour; timber framed; approx dimensions 1m wide by 2 m high

Remove old wooden paling fence Discuss style and colour of new colour bond fence Supply and install new fence

We need a side gate and short fence section supplied and installed at our home. Gap between fence and house is approx 2.5m (and would like a gate that is hopefully approx 2.0m in width). Scope: • Supply a large prefab gate (eg Bunnings or similar) + hinges + latch + galvanised post + wood pailings + fixings. • Install gate with hinges on the right-hand side (may need gal post fixed against retaining wall or set in ground). • Add pailings to gate to bring height to approx 2.0m. • Fit latch. • Attach about 6.0m of 1.2m-high pailings to an existing fence. Open to suggestions too if there’s an easier or better way - we’re easy to work with, easy access to work area and parking. Looking to get it done before 23 Aug so we can secure side of house. Any questions please let me know. Cheers John

Install 8 2400high x 1200 wide galvanised mesh sheets to colorbond fence. Job is ready to go. Easy access i got clips & surfmist screw fixing. i can give a hand with the install as well. colorbond fence is 1800 high.

Need driveway gate rehanged and rusted hinges and latches replaced

Need to install 3 driveway kerb edge ramps of 1.2 metre each. See product and installation details at https://esafetysupplies.com.au/products/driveway-guru-kerb-edge-ramp-1-2m-section Material will be supplied by me

I need two pool fence type gates supplied and installed on both sides of the house gap 860mm one side and 1530mm otherside. Need to keep pets out

Drop the gate post into the ground and swing the gate.. level the ground and spread 3 m3 of wood chip. Gate supplied.. Can supply the wood chip and gate post..

We need to install a gate and small fence panel to create a dog safe area beside the house asap. Would need to be at least 1.5 high. The area is approximately 2 m wide. Thanks.

Supply and install new Colourbond fencing, approximately 1800mm high. Colour: Surfmist (posts and rails also Surfmist). Include timber sleeper (200x50mm) at the base. Complete removal and disposal of the existing damaged fence (partially broken due to recent cyclone - photo attached for reference). Site clean-up after completion. We have received a quote of $4500 for this work (including $500 for rubbish removal). The contractor who provided is busy and cannot make it in the next few weeks and hence reaching out to Air Tasker. Please provide your best quote. Thanks for your consideration.