Find a fence installation professional in South Brisbane

Installation only of pool fence

We need to replace the existing gate with the new aluminum gate please see photo 120w180h The new gate will be provided. Alternatively you can provide the gate and advise the additional cost for the gate and lock

Need to Install a colorbond gate to the side of the house. One post is already at the place, and all the materials needed for the gate is already at the site, and dug a hole for the second post as well. There is 1.4m gap between the fence and the wall so need to install gate over there as you can see in the picture. Thanks

Hi, We have a project in Holland Park, we need a carpenter to install a fence Mounted Net. Comes with 3 poles that needs to be screwed onto the Timber Pailing Fence. Netting can be tied to the post with Zip Tie. Poles and Netts will be provided. You must bring zip ties, ladder and tools.

Our back fence has about 2 metres where the palings cover the rails but then the rest of it has the rails showing. Looking for someone who can put up some palings to match the beginning of the fence and cap it at the top. The area that requires palings is approximately 12m. Require pine palings 1.8m. Would like it done next week sometime if possible, flexible with times just not Thursday. Located in Carina

I have 2nd hand fence panels. Solid wood picket fence, painted, about 2 meters high. I need them installed on my property. Picture of fence at previous location. 25 meters approx. 11 panels in total I require metal posts. No gates The existing cyclone fence needs to be removed. I'm happy to attempt myself but possibly need help with removal of the cyclone fence posts with the concrete. Material, e.g. new posts and concrete must be purchased by the team installing it and will be paid for of course. I like someone with a reputation, ABN, insurance, Minimum 4.8 star rating and 80+ feedback

timber fence removal and install of new timber fence approx 17 metres 1.8 high may need new posts as well

Remove old wooden paling fence Discuss style and colour of new colour bond fence Supply and install new fence

We need a side gate and short fence section supplied and installed at our home. Gap between fence and house is approx 2.5m (and would like a gate that is hopefully approx 2.0m in width). Scope: • Supply a large prefab gate (eg Bunnings or similar) + hinges + latch + galvanised post + wood pailings + fixings. • Install gate with hinges on the right-hand side (may need gal post fixed against retaining wall or set in ground). • Add pailings to gate to bring height to approx 2.0m. • Fit latch. • Attach about 6.0m of 1.2m-high pailings to an existing fence. Open to suggestions too if there’s an easier or better way - we’re easy to work with, easy access to work area and parking. Looking to get it done before 23 Aug so we can secure side of house. Any questions please let me know. Cheers John

My propery need a new slade sliding gate match the slade fence color. Please quote. Thank you.

timber fence pine........... posts 100 x 100, rails 100 x 50 and palings 100 x 1.8,,,,, 64 lin metres

Install 8 2400high x 1200 wide galvanised mesh sheets to colorbond fence. Job is ready to go. Easy access i got clips & surfmist screw fixing. i can give a hand with the install as well. colorbond fence is 1800 high.

Need driveway gate rehanged and rusted hinges and latches replaced

Need to install 3 driveway kerb edge ramps of 1.2 metre each. See product and installation details at https://esafetysupplies.com.au/products/driveway-guru-kerb-edge-ramp-1-2m-section Material will be supplied by me

I need two pool fence type gates supplied and installed on both sides of the house gap 860mm one side and 1530mm otherside. Need to keep pets out

Drop the gate post into the ground and swing the gate.. level the ground and spread 3 m3 of wood chip. Gate supplied.. Can supply the wood chip and gate post..

We need to install a gate and small fence panel to create a dog safe area beside the house asap. Would need to be at least 1.5 high. The area is approximately 2 m wide. Thanks.

Supply and install new Colourbond fencing, approximately 1800mm high. Colour: Surfmist (posts and rails also Surfmist). Include timber sleeper (200x50mm) at the base. Complete removal and disposal of the existing damaged fence (partially broken due to recent cyclone - photo attached for reference). Site clean-up after completion. We have received a quote of $4500 for this work (including $500 for rubbish removal). The contractor who provided is busy and cannot make it in the next few weeks and hence reaching out to Air Tasker. Please provide your best quote. Thanks for your consideration.

Need this gate replaced, dimensions 1.40m wide by 1.80m high. Thanks

I am after someone to install a colour bond fence, it’s 11.5m worth and I will supply the fence. It’s just down one side of the house Would also like two gates to be bad opening in 3m. See pic attached