Find a fence installation professional in Adelaide

Install Net Barrier on Fence (3m High) - Poles and Net already purchased/supplied, but please supply screws for installation on colorbond fence. https://haverford.com.au/products/3m-wall-mounted-support-post?srsltid=AfmBOoqMVkbRfGM_cBOOgx-HDXZOIq81Bai01VfBJKCeeb5_IQk3sGx2 Install Instruction from Website The bottom "part" comes with 3 pre-drilled holes for attachment to your fence. For additional support you can drill ADDITIONAL holes in your posts to keep them firm against your fence. The posts can also be moved vertically (up and down) to reach your ideal height. Please note that the higher you go, the less stable the posts will be. Your netting is tied onto the 2 attachment eyelets, and additional cable ties (not included) can be used to fasten the netting at additional points up along the post. A wire cable with carabiner snap hook is included, and will need to be used to provide additional support to the post at the top. (light duty applications may not require the support cable) Please note that the screws to attach to your fence are NOT included.

Supply and install a glass pool fence of around 6m length. Will need a gate included.

Purchase and install fence extension/ lattice across out back fence

Fence rails need replacing old ones rotten

Looking for a professional to install fence panelling. I have an old bamboo fence infront of the boundary fence which is falling apart. I need this removed and disposed of. I have ordered 16meters of Good Neighbour fence paneling (1.8 high) which needs to be installed/ attached to the existing boundary fence.

Build a kit PaWz 2M x 3M chicken coup@ Prospect

Colour bond fence rusted replace bottom 2 x 2.4m horizontal posts , 2 x 2.1 vertical posts and reset into ground with concrete . Fence sheets ok to use. Woodland grey.

One of my back verandah posts has rusted through at the base and needs replacing. The other posts are fine — this is just for one post. Looking for someone experienced with verandahs or structural work to: • Brace the verandah safely • Remove the damaged steel post • Supply and install a new galvanised steel post (plain finish is fine — vines will grow over it) • Mount it on a base plate, not directly into the concrete • Make sure it’s level and secure Easy ground-level access. Please include both labour and materials in your quote.

A rotten fascia/bargeboard needs to be replaced and painted. The house is located in St Georges SA 5064. The whole fascia is about 2700mm. The rotten part is about 250mm. Please provide quote. Thanks

Job: Recladding 4m of Fence & Install 1800mm High Gate Details: Looking for a qualified installer to reclad approximately 4 metres of fencing using 1800 mm high Colorbond fence panels. The existing fence frame can be reused. Also need to install an 1800 mm high gate in the same location as the old existing gate. Location: Prospect Place, Adelaide Job Type: Residential Materials: Colorbond panels (existing frame can be used) Please provide a quote for labour and materials and include availability for inspection or installation.

AirBnB guest has accidentally dented a panel of a new colourbond fence. We need quotes for repair ASAP to submit to AirBnB however there’s plenty of flexibility regarding when the actual repair can occur. The fence is 1500mm high I think and the damaged panel is on the level area of the fence where cars park next to the house.

Rear fence repair required The fence has been damaged by strong gully winds. The posts are still solid, but the timber railings need to be replaced and the fence sheets reattached (nailed or screwed) to the new rails. Looking for someone to come and inspect and provide a quote.

Old gates need to be installed in the driveway-one set to begin with Concrete poles into the ground ironwork to be painted black Gates should close to keep the dog in perhaps automatic closing

Installation of good neighbour fence and plinths

We need a fence of 6.35m installed to cordon off a section of our backyard for our dog. We are thinking of a metal tubular fence, it will need to be tall enough to prevent our Labrador from jumping over - at least 1.2m pool fence height. There will need to be a small gate in the fence to allow us to enter / exit the area. We would like the job done as soon as possible. Materials to be supplied by the person completing the job or we could buy the “ProtectorAI” black aluminium pool fence from Bunnings if this is suitable. Price to be adjusted accordingly- please provide your quote. No old fencing to be removed. Thank you!

This gate is broken. We need someone to remove it and install a new one. We don’t have the new one so the person will need to source this for us. This price is for the installation only. Cost of gate will be added on (obviously)

We need a wrought iron gate installed at the front of our property. Each side weighs 195kg, and the posts/footings will need to be dug, installed and reinforced. Will need advisement on posts to buy.

Supply and install fence in between two properties

Gate needed between fence and house. Approx 138cm