Find a fence installation professional in Sydney Northern Beaches

we need to build a boundary fence which is out of eyesight, for pool compliance reasons, as well as rebuild some steps. The space has been cleared. There is around 3-5m of timber paling fence that needs to be built on both sides of the property and 20m of fence along the back. The back fence can be colourbond or other functional low cost option, the aesthetics are not important. It can be fixed off the retaining wall.

As described Refer to photos 1-2 hr job

Need to put in pence pailings across 2 areas. Both areas are 7.5m long, so 15m of pailings to install. have fence pailings (2.1m) and timber battons provided to do the job, just labour and hardware to do task required.

Quotes to have fence replaced in the New Year. Like for like - timber. Approx 13m long x 1.2m high inc 1m gate Old fence will be removed beforehand.

Install Acoustic Panel down the side of stairs. I will provide the panels just need installation. Only 4 panel to required should be less than 2 hours for a pro. I will provide the panels.

DEAR SIR/MADAM, I LIVE IN BELROSE 2085/NSW... I AM LOOKING FOR A TRADIE WHO IS FAMILIAR WITH INSTALLING 'JACK MATRIX' DECORATIVE PANELS 2410 X 1250mm USING J.MATRIX FENCE HARDWARE I WANT TO USE THEM AS A FENCE REPLACING A HEDGE. IS THERE SOMEONE IN OUR AREA WHO MIGHT INSTALL THIS FOR ME? KIND REGARDS - CHRIS

We need our rotted front gate post replaced with a solid, long‑lasting new one and have the gate working smoothly again. Looking for someone who knows their way around timber posts, concrete footings and gate alignment. About the job The existing timber post on a residential front gate has rotted at the base and needs to be completely replaced. The goal is for the new post to look neat, feel solid and allow the gate to open and close cleanly on the existing hardware. You’ll supply a new treated timber gate post of similar size (4"x6" x approx 2.4m) and appearance to the existing one, suitable for being set in concrete and exposed to the weather. You’ll remove the old post and concrete footing, install a new footing and set the new post plumb and in line with the gate and latch. The existing hinges, fence connection, sensor and cabling will be moved across to the new post and reinstalled so everything works as before. The new post should be painted to match the gate as closely as reasonable, using exterior-grade products you supply. Site and support Easy access at a suburban front gate. Water and power are available on site. You’ll bring your own tools, equipment and materials and leave the area tidy, taking away the old post and any waste. If you have experience with fencing or gate repairs and take pride in a neat finish, please get in touch. Happy to share photos and extra measurements to help you.

As you can, our fence has fallen over. The timber posts were not correctly treated and the posts have rotted over time. We are hoping to get quotes for someone to replace the fence posts, trim the bottom of the fence (which has rot) and re-erect the entire thing. There are 6 posts to replace. The new posts need to be cemented in. Please indicate in your quote whether it includes or excludes supplies (H4 timber, cement, etc). We are looking for someone who is capable and experienced. We live in North Manly, so welcome anyone who can also come for an inspection to discuss.

I need to build a single carport using a galvanised grid with metal posts, with barriers and associated works required to comply.

Section of timber fencing has collapsed/fallen down. Need to remove and replace one section only in timber to match rest of fence (we will obvs repaint/stain)

I need 2 sections of colorbond fence installed 3 posts and 2 sections of saw tooth infill panels holes for posts may possibly need core drilling as there may be rock under the surface. Not sure of the cost - please estimate cost please indicate if you can supply the fencing as well or just the labour Please note this needs to be completed on Monday 24/11/25 location Northern Beaches

Hi there we need a 1.8 metre high roughly 30m long wooden fence put up around our back garden we live up in frenches forest. Wondered if anyone can help out?

Need and experienced fencing contractor, with tools to put up a 32mtr long x 2.1mtr high - treated Pine Paling fence with 3 Rails - using 50x50x205mm Steel Posts - on top of concrete retaining wall I will provide all materials with posts set in cement ready for the fence to go up.

Job involves helping me build a new concrete pad in my pool equipment yard. I will need help transporting bags of concrete mix, mixing the conrete and pouring. It's likely the job will only take 4 hours or so.

I need help installing some fence panels Hole needs to be dug, posts cemented in panels fitted in. approx 4 panels and posts

All materials supplied, labour priced only. Install pine pailing fence. Old fence has been removed already and holes dug for metal posts.

Have 9 meters of fence that needs to be removed and replaced

I need 2 Bunnings bamboo panels screwed to the existing fence. There is a little cutting required around the gate as per the picture. The 2 new panels are 1 metre wide.

Build and install two small sections of 1.8m lap and cap timber fencing and a steel framed side gate with quality hardware. The first section is 7.4M and The second section is 2.65M including the gate. We require you to make or supply a steel framed / timber clad side gate. Please note the ground is sloping so we want to keep the top of the fence the same level and shorten the palings at the bottom as the ground goes up toward the street. Also please quote to remove old side gate (pictured) and section of fencing which has become warped. There is 1 small to medium tree stump that may need cutting back too where the side fence will go. Please quote to supply all materials. We also want the fence and gate painted, if you’re able to do this part of the work too, please indicate in offer. Otherwise we can have this done separately if preferred. We can supply paint.

Hi there, We have just rendered and painted our external wall and had to remove our garden gate in the process. We have restored the gate and now want to reinstall. The brackets are very old so we may need to buy new hardware and a lockable latch. We are away and have Airbnb guests coming Sunday. We would love for you to go and look at the gate to see what hardware is needed, then go to Bunnings to purchase, the come back to install. We will of course pay for the required hardware. Would love for you to install tomorrow :-)