Find a fence installation professional in Logan Beaudesert

I would like a colourbond fence erected between my propert and my neighbour.

Needing 37 fence pailings replaced from dog chewing on them 1.8 tall.

I need a pedestrian gate supplied and installed. Please refer to pictures of what I need. I have a fair idea on the cost of the gates so please ensure your quote is not trying to rip me off. I can supply if need be but happy to give you the task to supply and install if we can agree on a fair deal. 1.8m high and 1m wide

We like to install some timber fence at the backyard to have some privacy between the studio and the main house. It’s about 5.7 m long and 4.3 m wide. Total would be around 10 meters. Prefer timber fence with height of 1.8 m. Please include your offer with materials, labour and etc. Thanks.

Replace the old timber paling back fence at a rental house in Marsden with standard 1.8m Colorbond. I'm after the most cost-effective Colorbond option (standard colour and profile). Current fence: old timber paling fence along the back boundary. Posts are rotted and leaning, some sections are propped up with steel posts, and palings are broken and weathered (see photos). Please quote to: - remove and dispose of the old timber fence - supply and install standard 1.8m Colorbond fencing along the same line - include all posts, rails, concrete and clean-up Please measure on site and quote a total fixed price including GST. I need a written quote with your ABN for the property manager. The house is tenanted, so site access is arranged through the property manager.

There is a front gate to be installed between my house and garage. And a 2m fence behind the garage. All material on site and ready. Very straight forward job. Needs 4 post holes in total. PVC fence and gate door. All brand new. Distance between house and garage is 3 m. And gate width is 1 m. The fence behind building is 2 m.

Timber fence is shot, but need two posts replaced to straighten up Will clear trees and clear area Posts are on neighbours side but will sort access or even if posts are on my side i don’t mind how it looks Temporary fix until whole fence replacement Contact me for your price

Cut circular hole in gate (for hand to pass through). Install new gate latch (as pictured). Please remove old last and sand hole. Thanks

Need an fencer or handyman to supply and install fence plinths with support to cover gaps between my existing fence and the ground. The works should be match existing fence where possible. Photos attached.

I need an experienced fencer to supply and install a compliant black metal pool fence and gate around the sliding-door recess shown in the attached photos. This work is required following a pool safety inspection. The fence returns are intended to sit close to the left and right sides of the sliding-door recess, generally in accordance with the inspector's concept sketch. Requirements: - Fence height: 1200mm - Latch height: 1500mm - 1200mm arc from the bottom of the fence outwards, which must not hit the step into the home - 900mm arc from the top of the fence outwards - Gate to be self-closing and self-latching - Gate must swing inward toward the house, away from the pool - Fence to be fixed to the existing timber deck - Final dimensions and installation method to be checked onsite The concept renders are indicative only and show the intended style/layout. Please quote for supply of all fencing, gate, compliant hardware, posts/fixings and installation. Please include examples of previous work if available. Please submit your offer for supply and installation based on the photos and inspector's requirements. There will be additional work available for the successful tasker if this job goes well.

I need safety barrier installed. Would suit an experience carpenter or builder. Verdex safety barriers x 20 View here: https://www.verdex.com.au/modular-safety-fencing-system I have the space marked out and will be available to assist. Requires drilling into concrete floor. Require own tools, will supply fixtures etc.

Need someone to build/order and hang a timber gate to replace this broken one (doesn’t have to be white, just needs to be timber and we can paint it). Need it done prior to next Friday the 11th of sept.

Looking for someone to install balustrade hand rail and wire. Can supply to balustrade wire and posts if needed

Front Gate Post Installation – Fallen Gate Repair The gate brackets have come away from the brick pillars. The standalone brick pillar, approximately 160 cm long and 36 cm wide, appears to be loose, and there are also cracks on the opposite side of the pillar. The other side of the pillar is connected to the fence; however, it is not a retaining wall. Regarding the post, Not sure whether to install 2 new steel posts or repair and reinforce the existing brick pillars? Could you also please provide a cost estimate for the 2 options respectively and confirm whether any warranty is included with the repair work? Thank you.

Building a secure dog yard, materials for fence supplied

I need a handy man to supply and install two timber gates on timber poles. I will pay for all materials separately. The materials are available in Bunnings.

Wooden door to be installed at the side of the house between the door door fence and the house

Fence and Gate Installation Hi, I’m looking for an experienced fencing contractor to supply and install a Merbau slat fence and matching pedestrian gate at my property in Greenbank. Measurements: * Total length: 9.1 m * Fence section: 2.4 m * Fence and pedestrian gate section: 6.7 m Important: The fence must comply with the estate covenant/design guidelines. It must be constructed using 31 × 11 mm Merbau Solid Screening KD Dressed All Round (DAR), or an approved equivalent that meets the covenant requirements. Please include: * Supply of all materials. * Installation of the fence and gate. * Posts, concrete, hardware, hinges and latch. * Clean-up and removal of waste. Please provide your quote, timeframe, and photos of similar Merbau fencing you’ve completed. I’m happy to arrange a site inspection before the final quote.

Looking for someone to replace approximately 15 wooden sleepers(halves) on our garden fence .I will buy them from Nuway Landscaping, but may need help collecting them , which will be paid separately. Nuway is only about 10–15 minutes away. The existing posts should be usable for installation, and the soil/dust behind the fence will stay in place, so there should be minimal removal work needed. All materials including post and screws will be provided quote will be only for labour Please send your quote.

Looking for a handyman or fencer to reinstall a timber gate with steel frame that was removed on side of our house for construction in the backyard. Hole for post is still there, gate still attached to post, latch still attached to externall wall of house. One missing panel that was damaged in the removal. Have purchased extra timber panels and timber rail just incase. Location is South MacLean 4280. Space is 2.8m wide. 1.8m tall.