Find a fence installation professional in Springwood

A handyman is required to install colorbond fence and a small patio. 60 bucks per hour will be paid. Minimum 3 hours. All materials supplied.

A very small part of fence needs to be erected. Two holes have already been done and posts have been installed. Just one more hole is required to be done. 2 hours considered for this job. All materials will be provided.

We're installing a new fence, including a pool fence around the pool and equipment, with all necessary screws, panels, and posts supplied. Please ensure compliance with the Queensland pool safety standard.

fence to be 22m. And 5m of that needs a small retaining wall with concrete 30cm high(due to the difference height between my property )and want to reinstall colorbond. Suburb is Logan brisbane - Due date: Before Sunday, 24 December 2023

INSTALLATION ONLY, I HAVE THE MATERIALS. I need 4x 2450mm flat top aluminium pool fence panels installed. 1x panel to make 2 short sections and 1 gate. The posts need to be core drilled except for 1 in ground. The fencing and grout will be onsite for you. There is a straight section of 9450mm then a 1000mm return and then 1450mm gate section - Due date: Before Wednesday, 1 November 2023

1. Removal of existing chainmail fencing. 2. Installation of approx. 10m of Colorbond fencing and posts - already on site ready for installation. 3. Clearance and disposal of all removed fencing material. Note: access available from both sides. - Due date: Flexible

Hi Rod You interested in quoting for a full replacement of a small pool fence, on side of house, which joins a boundary fence. Total length is about 4.5 mtrs plus a gate. I'm looking at replacing with a flat top protector fence and gate from bunnings which I will buy and have delivered, unless you have a vehicle that can go that [ include in your quote and specific if you can] Will need to dig two holes for posts and the two posts for the gate will need to be dyna bolted to concrete pad surrounding pool. I can remove the existing fence prior to your arrival, though if you have the means to take to dump can you include a figure in your quote for that. With the set up of the fence which is in a garden bed next to concrete pad surrounding pool I'm not sure about the appropriate distances about ground with the fence product I am considering. If you provide an email I will send through photos. In relation to timing it would be nice if it could be done prior to 26 Jan but it's not a deal breaker. I'm retired and will be home and can assist as required. I'm not totally useless and have built the timber fencing around my property my self. Looking forward to hearing from you. I'm also after some advice re ensuring the rest of my fencing is compliant, Regards Craig

4 x 3 wooden fence and a gate to be installed. I have the Materials ready for cutting and installation. Next to a pargola . - Due date: Flexible

I need a section of colourbond fencing removed and relace with a gate (open inwards) and lockable (1800 x 900). Depending on quality of work, more jobs available. - Due date: Flexible

We are wanting to remove a panel from our front fence to create an entrance. We would like to have an arbor and gate with a letter box. - Due date: Flexible

Looking for someone who can install new fence or if any other ideas most welcome but not too expensive - Due date: Flexible

Need to install glass pool fence approx 20 meters as shown in the images. This will be approx 10 - 11 panels including gate. Providing Form 16

Install Dual Lock Master Swing gate on wooden fence Requires cutting concrete driveway to run cables in diver for power Will supply the lock master swing gate kit solar panels (LockMaster Swing Gate Opener Auto Solar Power Electric Kit Remote Control 1000KG https://www.amazon.com.au/dp/B07TJR2T94/ref=cm_sw_r_cp_api_i_0VN2VB0DF9EGBYPFC3ZQ?psc=1) - Due date: Flexible

Measure to order bunnings pool fencing i can do this and pay for materials required, and then installing 3 sided with 2 gates. - Due date: Flexible

I need a 0.5m high x 6m long concrete sleeper or Bessel Block retainng wall built and a existing 9m standard wooden fence on it relaced. Work area is in a confined space so may need 4 post holes to be manually dug. - Due date: Flexible

I have mesh and star pickets to make a enclosure for a chicken. I would like someone to build this please. Just need to block chickens from coming into all areas- open to quotes

Looking for an experienced and hardworking fence builder to install a new aluminium fence, total is 17 meter length by 1.2 meter high, including 2 single gates (one is 975 mm wide and other is 1475mm wide) need to install and two Lokklatch gate latch as well, 10 posts in ground that need 600 mm deep underground and one flanged post bolt down on ground. some of fence panels have to cut to fit the size. Fence location are at front of property, the ground is level, small part has little slope, easy access, all the materials will be supply, there are 2 full days work, all inground posts concrete need to set well before install brackets please. If you have experienced and have own tools, please make an offer.

Repair/replace three steel patio posts that have become rusted at the bottom and are unstable. They are 75 x 75mm. If replaced happy to go with timber or whatever is more cost effective. Looking for quotes thanks

We have a gate and 2.4 m panel of pool fencing which needs installing, requires 3 x poles (provided) to be drilled into cement. This is just for our front porch not for a pool. We just want to finish the fence off so our dogs can’t escape if they run out the front door. All materials are provided - just require the work. We do require a piece of fencing (2.4m panel) to be cut down to sizing so the tool to do that is required as well please. Picture 1) is of the porch lengthways we want to fence off the end where the large gap is. Picture 2) is of the posts Picture 3) is of the long 2.4m panel fence part Picture4) is of the gate.

Fence damaged by storm. Need replacement