20 Fence Installers in Canberra

We're after someone to please install a 6.4m wide approximately 2m high lattice privacy screen at the front of our property. Its a new fence so posts would need to be installed as well. We'll supply materials. Many thanks

I need aluminium slat fencing installed. All materials will be supplied. Fencing is about 20m long. 12 brick columns already in place. Columns are 2m high connected with a 600mm high brick wall. Fencing will be 1.4m high. 75mm slats with 9mm spacing

Size is 5 m wide and 1.80-2m high. Against an existing fence that has good quality concrete posts. Also need it painted. I can supply whatever materials are needed - or you can if agreed.

I need a quote for the installation and supply of materials for a 23m colourbond fence, 1 gate and the continuation of a timber fence approx 14m

I need to replace a section of an old timber fence and install color bond fence over there. The house is in 21 Geeves Court Charnwood ACT 2915. The length of the fence is about 8 Meter. Fence to be replaced is situated at the front of the house.

Install a wooden fence with a simple swing door on a levelled soiled ground. There is no fence currently. Need to have a vehicle to help with purchase. Need job to start this Saturday and completed by Sunday 30 June.

Gate made from timber to match in with fences. Then hung please.

I have 19 colorbond fence panels to install. It’s around 42m all up. Back fence and side fence. Other side of house already has colorbond fence. I’m after a helping hand to remove old wooden fence and install new colorbond one. I have a battery post hole digger but if you have something better that’s great. I’m happy to supply all materials like concrete etc plus I can take away old fence posts as well. Fence has to be installed before 14 October

Looking to source and install a lockable timber side gate in front courtyard of our townhouse, between side of house and fence to seal off backyard. Gate would be in similar style to this picture. Will pay for all materials.

Install a fence gate on my sidewalk. The sidewalk is concreted. 0.95 wide by 1.8m long Colorbond preferable but happy with a timber/merbau one too. Quote must be for supply and install including a lockable latch.

I require a small gate to be installed out the front of my house, to enclose the front courtyard, to stop people wandering in, and stop my puppy wandering out. Something at waist height, that swings closed on its own and matching the existing fence would be preferable.

Can you install our front gate for us. It's just concrete in 4 poles, attached a meter or so of pool fence panel on either side and then hanging an iron gate up. No cutting involved, just screw in brackets and hinges. All materials we have already. Thanks

We need a dog fence, just star pickets and fencing mesh, installed around our garden beds (to save the garden from the puppy). About 8m of garden edge.

short distance only fronting street, wooden slat fencing with brick/mortar columns x 3 approx 4 meters long needs material and equipment

To build a picket fence for a courtyard with 2 gates and a railing along the edge of the deck.

Need the following: (a) two gates repaired. One is really simple to repair (for someone with the right skills and tools), the other may need replacement so it doesn’t keep needing repair. Will take advice. Price negotiable. (b) old laserlite roofing needs replacing. Needs considerable discussion to arrive at best approach.

6’ high, 8’11 in length. Will need to colour-match with our existing Colorbond fence that is wilderness/pale eucalypt in colour. I have not yet purchased materials. Will adjust price after consultation.

Install 15m of colourbond fence. You to provide materials.

Need the side gates replaced with something more secure and higher. Planning on having dogs as well so they can't escape.

Hi I have the pool fence panels, poles and gate to go between brick house and colourbond front fence in a straight line. Not confident in my ability to install it and make it level so want someone who has done this before. Thanks