Find a fence installation professional in Blacktown

Hi I want to remove existing wooden side door and install new metal door which can be open outside would need wooden support on the side to support the door door dimensions approximately 1350 mm wide and 1750 mm height pls see pictures and ask anything if unclear price to include materials and labour door something like one seen in the picture behind the bins

Need to install a slide or a swing gate in the backyard

Need someone to install Aluminium Fence in my front yard. See pics for reference

It’s my neighbour back fence which is stopping us to carry on construction on my property. Spoke with neighbour which allow us to remove the fence and place a temporary fence a meter push back with a privacy clothing on it. Max width 15 metres

Temporary fence need to be installed for 10m front of the vaccant land.

Single existing 1.8m ColorBond fence panel to be removed and replaced with 2.1m panel. Additionally, an existing 1.8m gate post currently attached to the 1.8m fence panel to be removed and replaced with a 2.1m gate post. Finally, existing gate release mechanism to be retained and raised minimum 130mm.

I’m looking for someone to help change the opening direction of a side gate in my backyard. The gate was originally hinged on the right side, and I want to change it so the hinges are on the left side instead. The gate has already been removed, so it will need to be reinstalled with the hinges moved to the other side. New screws will likely be needed, so please bring suitable screws and tools. The gate itself is in good condition. Location: Tallawong. Flexible with timing. Budget negotiable. Photos can be provided if needed.

Need to fix sliding gate rails

looking for a price for colourbond fence installation about 4.5meters wide and 600 to 800mm tall just a price for labour and i have all the materials already

Need supply and replacing of color bond fence panels please.

Need pool gate rehung. Original contractor installed post bolts into mortar rather than brick, so this post needs refixing to house brickwork properly. Gate lock also needs replacing but I have all parts necessary, including new lock.

I want an extension of colour bound metal fence from the exising fence

Supply and installed a gate and fencing with colorbond and remove the existing wooden fencing. Measurement 3.2m x1.8 fencing Measurement 1.0m x 1.8m slate gate

Hi, I have a timber side gate that currently closes directly against a brick wall, so there is no proper latch point and I cannot lock it. I would like a handyman to: -Supply and install a treated pine timber post next to the brick wall so the gate can close against it -Install a lockable gate latch -Adjust/re-align gate if needed so it closes properly -Tighten hinges and do minor tidy-up (replace screws if required) Goal is to keep the existing gate but make it functional, secure, and able to lock.

Need to install a side gate

Remove or replace metal gate with a new gate that is able to lock with a key

Need 2x wooden gates made and installed. Gate #1 - 113x94cm Gate #2 - 100x94cm

Task description: Hi, I’m looking for an experienced fencer/handyman to install pre-made white aluminium picket fence panels (with gaps) from Bunnings (or similar) at the front and sides of my house. We will purchase and supply all materials — I need labour + installation only. Fence style (pre-made panels): • White powder-coated aluminium picket panels (like the Bunnings “Aluminium Boundary Fencing & Gates” range) • Pickets with gaps (open style) • Height: ~1.2m (or closest available panel height) • Gate opening: 1.10m Measurements (approx.): • Side (left): 5.70m • Side (right): 6.30m • Front right section: 4.10m • Front left section: 4.80m • Gate opening: 1.10m ✅ Total fence length (excluding gate): 20.90m Scope of work (install only): 1. Confirm measurements and panel count on site 2. Mark the fence line (I will share photos with red markings) 3. Install fence inside our property boundary (not on the boundary line) 4. Dig post holes and set posts with concrete 5. Fit panels straight and level, including corner joins 6. Install 1.10m gate (hinges + latch), ensure smooth operation 7. Clean up and leave area tidy (stack leftovers neatly) Materials we will supply (Bunnings pre-made system): • Pre-made white aluminium picket panels (quantity based on panel width) • Matching posts (end/line/corner posts) + post caps • Gate panel/kit (1.10m) or matching gate from same range • Hinges + latch set (if not included) • Brackets/rails/connectors as required for the system • Screws/fasteners (galvanised/stainless) • Concrete for posts (rapid set) What you must provide: • All tools (post hole digger/auger, level, drill/driver, cutting tools if needed) • Experience installing aluminium panel fencing (preferred) Location: Tallawong NSW 2762 Budget: Please quote (labour only) When: Flexible (weekends/weekday)

Complete Assembley of super gates gate & panel Drill bolts into concrete & brick wall Easy job to do for someone experienced

Colorbond fence post(s) have corroded out. Either repair/replacement needed. Colorbond sheets and rails look ok.