Find a fence installation professional in East Brisbane

Price is to provide a quote on replacement of Colorbond panels and posts that have started to rust. So a builder carpenter or fencer who would have necessary tools and experience. We have a granny flat with Colorbond siding. When it was built the builder put the panels all the way down into the ground on 2 sides. The edges of these panels that touch the ground are now rusting away. Approx 15m. Need to have lower panels removed, new panels cut a little shorter, so the edge is just off the ground, and installed. New edge to have a rubber trim on the edge that i will provide. There are a couple of posts the need a solution as well. Alternatively, rusted edge could be cut away in situ if rust is not too high into the colorbond? We are at Tingalpa.

install the gate with panels the total width 4260mm.

Hi, I’m looking for someone with experience and with builder licence for the follow works are in the picture.

Installation of a colorbond fence, new fence is provided. the quote should include the following: 1. Removal of existing wooden fence (I will have a skip bin for disposal in the front of the house). Old fence has a very small wall of concrete blocks but there are no footings only blocks underground 2. Install of 1 line of concrete sleepers (optional please quote with and without the sleepers. The sleepers can be provided by you or by me quote accordingly) 3. Install of the new provided colorbond fence

Pool gate and one panel of pool fence has rusted out of the ground and needs replacing

Replace existing gates with a new monument sawtooth style gates.

install the gate with panels the total width 4260mm.

Replace fence sheet blown out in yesterday's storm. Check over rest of fence to make sure its secure.

I am looking for someone to install cladding to this fence along the pool side and possibly more of the fence. side of the yard. I will pay for the materials. Most of the materials are already onsite. I just don’t have a way to collect it if we need more. Mostly looking to get a cost per metre for install. About 10 metres minimum up to 25 metres to be installed. Would like it done this month if possible. The fence sits off the pool edge so will need to build out some horizontal supports to hold the cladding.

Have 4 wooden fence poles that need replacing for a pool area. The existing metal fence sections would be reused.

Provide and install cladding to colourbond fence - approx 6m

Seeking a quote for glass pool fence alignment correction and installation of two additional glass panels. Would also benefit from anyone who can certify the fence as well.

I need a qualified professional to supply and install a motorised timber fence gate over a driveway (4m).

We will order and have PIK fencing ready for our new pool which is due to commence on 18th November 2025. Need approx. 33 meters of PIK fencing installed across 3 sides of the pool. All fencing and parts will be provided and onsite ready for install. install Must be compliant with pool legislation.

I would like a fence installed 18m wide x 1.8m tall. This is composite wood panels

Secure 11 glass panels, x1 glass gate over 20m around new concrete pool. Spigots and pool fence on site.

I have recently had a new fence installed and want palings installed on the inside so it’s double sided. I have 50 palings onsite ready to go. I do have nails and glue but assuming you will have a nail gun, would expect that’s in your quote. Easy access. Open to quotes

Remove existing fence. Timber Supply & Install new Aluminum Powder coated fence and gate

I require some lattice installed at the front entryway of a unit, approximately 3 metres long and 1800mm high. Will require a post to be cemented in aswell

Right hand side 1. Demo and Removal of existing Fencing 2. Supply and Install 28.8 metres of 1800 Pine Fencing REAR 1. Demo and Removal of existing Fencing 2. Supply and Install 14.7 metres of 1800 Pine Fencing