Find a fence installation professional in Inner South West Sydney

Need a new colorbond fence supplied and installed along my driveway,it can attach to fence behind garage door as per photos, it’s just under 10m long. Because my neighbours driveway is higher than mine I would like to put 150mm wood sleepers on the bottom as per sample photo The fence will start at 1950 in height and slope down to 1m around 2-3m before the end

Need to install a safety fence around the air conditioner in the backyard See the photos

I need a hand installing a Screenline extension for a colourbond fence, scaling the ladder and doing the drilling. There are 2 panels. I've got ladders and a drill (just apparently not enough strength)

Replaced or repaired a privacy fence. If replaced,the lattice fence (wooden one) must be painted

Existing 6 panels of colorbond fence have slowly bent/ tilted outwards. Need to reinstall and add two layers of sleepers underneath. Most of the material could be reused but new posts will be provided (or extension) since sleepers are added. Sleepers also provided. Please provide quote for labour.

I have a metal gate bracket on a metal fence that needs two self-drilling tek screw installed. The existing bolt is rusted/seized and needs to be removed or worked around. Replacement screw needs to be obtained The job: Remove or cut off the old rusted bolt Install new tek screw through existing bracket hole into metal post Gate is lightweight timber, easy to manoeuvre You'll need to bring: Power drill or impact driver Possibly a spanner or angle grinder for the rusted bolt Estimated time: 20–30 minutes

Remove old fence and install colourbond fence. Pls see images for both sides Prior to committing we would like a site visit to confirm the scope

Remkve old timber fence and install new timber fence 12 metres long and 6ft high

I tried to use the sticky pads for the baby gate but they arent strong enough so they need to be removed and 2 drilled in handles drilled to the wall

Looking for an experienced fencing contractor to replace or repair one damaged chain link fence Gate no latch 📏 Size: • Height: 1.8m • Width: 3m The current gate is bent and needs replacement or preferably repair

I would like a quote to install an aluminum pool fence roughly 12 meters wide.

Please build and install swing gate on terrace steps in backyard to seperate our dog from our terrace. Swing gate to be same material as the railing.

Job involves removing and disposing existing fence. Supply and install new fence. Size 12 m at the back and approx 35m at one side of the house. Also require landscaping at real and front of the house. Total cost can be discussed after the meeting and site inspections.

Install new colorbond fence 11 metres long 9ft high Old fence in image will be removed

the old fence is lining down to one side and need to replace. I want a good quality job.

Supply and install 14m straight colourbond fence. Old fence has been removed.

Require someone with experience to install/repair Polaris pool gate hinge I purchased.

Need a gate 340 wide 2 meters tall

Supply and install fence with automatic door , 12.5m

The pool is at the front of our house in a box it’s 125kgs. It just needs to be brought to our backyard and set up. It’s a Bestway 6.40 x 2.74 x 1.32m Power Steel Rectangular Above Ground Pool Set. https://www.bunnings.com.au/bestway-6-40-x-2-74-x-1-32m-power-steel-rectangular-above-ground-pool-set_p0368655?region_id=117071&gclsrc=aw.ds&gad_source=1&gad_campaignid=22214611398&gbraid=0AAAAADtbEB-psUnW3FxBemwj08ksKsNDa&gclid=Cj0KCQjw35bIBhDqARIsAGjd-cavy1ltxFYpJ0475PcNRuwJWA7O0i_e9HVE13u7RvkRpie_6cs4KqUaAuMQEALw_wcB