Find experienced local fencing contractors in Bardon

Need pool fence certified - Due date: Before Saturday, 10 December 2022

Ideally I would like the existing fence removed too. It bolts together, and it has aluminum posts - which I think will pull out. Ideally I want the fence completed in a day or 2 days maximum because the neighbor has a dog The ground is almost flat - Due date: Flexible

Timber gates, double leaf, total length 2.4m. Swings outwards. I want the motors installed inside the gate, not outside. The width of car space is quite narrow, so I'd prefer if you can find a way to mount the motor inside the pillars with extendable arms, so they don't take up car space. Or install motors in the car width but they must be narrow profile. One side of the gate is bricks, the other side has a steel post, see pics. There is power supply on a horizontal beam, about 3m away. I am considering buying the below model, but if you have your own preferred models or refurbished motors on hand, I am open to recommendations. http://www.samtgatemotors.com.au/products-page/swing-gate-motors/came-stylo-double-swing-gate-motor-kit/ - Due date: Flexible

Some broken palings on fence need replacing (about 8) and some loose boards need nailing back in (about 5). Can send exact measurements. Can pick up materials beforehand if you let me know what to get. You’d need your own tools. Flexible on date/time.

I have a 1.8m timber gate with all the hardware ready to go into an existing 1.8m fence. The current fence would need to have a section taken out to make room and using one existing post there would need to be another post concreted in for the other side as well.

We need our garage fence and gates (2) fixed which were damaged in a car accident. Structure is sound, wooden palings need replacing. Hinges have come off gates. Also need some steps replaced/repaired on external staircase. - Due date: Before Sunday, 30th Jan 2022

I need 26.5m of fence (no gap between palings) including gate to be replaced as is on the slope. It also needs to be painted same colour as existing fence. Old timber to be removed from site. - Due date: Flexible

Hi, I have a glass pool gate/fence and the door is not closing automatically. It does swing but it looks like one of the hinges is no longer aligned so it catches on the post where the lock is. Thanks,

Old timber fence needs replacing. Old fence to be removed. Around 20 m of timber fencing needed 2 m in height. Price Negotiable. - Due date: Before Friday, 5th Nov 2021

I need a 3.3m timber post installed - dig hole (min.600mm) insert post and concrete. Post and concrete supplied, Tools required for install to be supplied by airtasker. Post to be installed in ground shown in picture. Let me know if more info required. - Due date: Flexible

First quote: New timber dividing fence to be installed between residential properties in Bardon. Timber paling fence about 2meters in height with 2 timber sleepers on the bottom. Hardwood posts. About 34 meters in length. Nice flat land but there is a large tree that straddles both properties which needs to be accommodated. Second quote: Separately, I need a timber gate on steel frame to close off the left side of one house and a large gate to close off driveway on the other side.

We need to puppy proof our driveway - approximately 6-8 meters of picket fence plus a gate. Love to have this done by the end of this week!

From Friday the 20th to Sunday the 22nd I was looking to have a fence builder join me on building my 600mm retaining wall with approximately 20m of colonial fencing. I am looking for some one with more experience than me and to come with a cement mixer and the necessary tools required. I will pay $35 per hour cash for the work. I will be helping alongside to speed things up. Thanks

Remove chain wire fence and replace with timber fence. 1.8mtre x 27 metre, full privacy fence. Access to do work from neighbours property which has been agreed.

Hello, I have a fence that we are looking to take down and replace with a new picket type fence. The direction of the fence is going to change. We would like the fence to end at the driveway and run up to the staircase and keep the driveway exposed. There will be no driveway gate and we would like to put in a gate next to the stair case for access to the back. We would also like to put a front gate in for aesthetics. I think we will arrange our own painter, but if you’re interested in quoting for this, that’s fine. The retaining wall underneath one side of the fence also needs to be redone. This will be difficult to quote without viewing. I will get better pictures tomorrow. We are flexible on when this can be completed by.

I require a silt fence to be installed on a residential building site. The site is 20m wide and the fence will need to match the the street frontage, the address is 20 Eastment St, Bardon.

Make an offer on an hourly rate. Probably a 2 person job. We need someone with fence building experience to help build a fence with hardwood posts and two hardwood rails horizontally. We then need solid rectangular mesh attached to the one side. Keen to get it done starting anything from tomorrow. Access to a hole/core digger foe the post holes would be a benefit too but not essential.

Need a qualified person to: 1. Dig out and remove a timber post and its concrete base; 2. Dig that hole further to 60cm and install a steel post with postcrete. 3. Dig second hole to 60cm depth and install a steel post with postcrete. We provide the two Steel posts - galvanised steel 75mm x 75mm 2.4 m long each. We have 4 x bags of quickset post mix cement. Please provide quote!

Remove outdoor gate from it's hinges and install the hinges and lock on the other side of the fence. It was installed on a non supporting post and is pulling the fence down.. Pics attached. Date and time is flexible

Hi - looking for someone to supply and install approx 16m of silt fence in Bardon. 1 x 10m run along the back fence & 1 x 6m run in the middle of the property. Works can be done at anytime.