Find a local electronics repairer in Brisbane

Marantz Amp (2000) requires speakers & new turntable connection

I recently had timber floorboards installed in my apartment and the workmanship is poor, with approximately 20 noticeable gaps left between boards throughout the floor. The original installer has refused to return and rectify the work. I have spare matching floorboards available. I’m looking for an experienced flooring installer, carpenter or handyman who can assess the floor and repair/fill the gaps professionally so the finished result looks seamless and blends with the existing floor. The aim is to eliminate the visible gaps without compromising the appearance of the flooring. Please quote for: Inspection and assessment Repair of approximately 20 gaps between floorboards Supply of any additional materials required (if needed) Clean, professional finish Photo attached showing an example of the issue.

I require some treads and landing to be brought back to life, sanding back then reapplying some new oil. *last photo is the finish I’m looking for.

We require a few spot paint touch ups on areas that looked dated and worn

The zips on the blinds have fallen or broken. It needs to be fixed or replaced. There are 7 zips that need replacement.

E21 keeps coming up on new Washing Machine. Hose maybe not inserted properly?

Removing ceiling lights and installing new lights with lampshades.

Fuse Box keeps tripping . Need a licensed Electrician to attend today to fix issue

I need someone to jumpstart my motorbike which is parked in the cbd.

I bought a gb500+ with dead cells and remade the packs entirely. Its the version with 2x 12v packs and 1x 4v pack. I plugged pack B into the pack B plug and A into A but the side opposite to the cable connectors popped and sparked when I tested the unit in 24V mode (switched on fine in 12v mode). From viewing some videos on youtube it is possible that pack B actually plugs into the pack A plug on the board, so I swapped them around and it booted up fine in both modes but read as having a flat battery. I unplugged the board that is soldered to the 4v pack and then the jump starter worked as normal, allowing to override on both 12 and 24v and showed it as correctly fully charged. This makes me suspect a fault in that board. Unfortunately I mucked around with it and plugged the pack A into pack A plug and B into B again and the main board smoked. I quickly put them in the opposite plugs and rebooted it and now it always has some of the face lights on all the time, but still works if I unplug the board soldered to the 4v pack. Only the bottom 12v pack plug actually powers the unit however, if I just have a pack in the top plug it wont boot up/turn on. I hope this information is enough to estimate how difficult it would be to diagnose/fix.

Luxman L85V Amplifier. RH channel has intermittent fault. I'll bring it to you

Dog chewed through lamp cords on 2 floor lamps. Need cords safely repaired/replaced and checked working again. Please quote including parts.

Have cut down bamboo but now need clumps and root system removed.

I have 7 stumps from large bushes that have been trimmed and need to be removed. They would require a small excavator as the bases are 20-30cm in diameter. The stumps are about 1 metre high making them easy to grab The root structure should be fairy shallow. Clear access is provided as they are adjacent to the driveway (driveway is being replaced in the next few weeks) Price to include disposal (carting and dump fees)

I have two leaking external taps that require fixing

Description: Hi, I’m looking for someone to help with a few small tasks around the house: 1. Move cupboard upstairs • Medium wooden cupboard currently in the garage • Needs to be carried up one flight of stairs into the house • I will help, but may suit someone strong or two people 2. Move glass desk • Help move a glass-top desk from one room to another room in the house • Care needed due to the glass top 3. Install curtain rod • Install a curtain rod above a window • Will need to drill into the wall and mount brackets • Please bring a drill and basic tools Photos attached. Looking to get this done as soon as possible.

Hi - I have two to three rubber gutter ramps to be installed in my driveway, requires drilling into the concrete. Its an easy job, I just dont have the tools.

Looking for someone to repaint the blue part of my front steps (9 steps). I put grip stickers on from Bunnings, they got dirty and then I put goo remover on to take them off. And now I've made a mess! A few slivers/chips in the wood to be sanded/sealed also. Plus patch white balustrade split (bottom left of photo). I have paint.

Replace 2 x 4 way taps Purchase, install and reconnect

Shower tap is leaking, laundry sink tap is leaking. Just after some good bunnings cartridges I think. The seat didn't look bad - I didn't want to reseat as I've not done before. Need someone with exp to educate me.