Find a local electronics repairer in Morningside

Install new ikea bench replacing old one. It is 3 pre cut slabs that will need to be cut into place and cut outs for sink and electric stove stop. Approximate sizes from ikea planner below

Hi, looking for a licensed electrician to come out and investigate an issue with two lights in our townhouse. The issue started during a period of heavy rain. The light in our upstairs ensuite (combined exhaust fan/light) started flickering on and off and has progressively gotten worse. It now only produces a very faint glow, which stays on for about five seconds after switching it off. The exhaust fan itself still works fine. We've also noticed the light in the adjoining master bedroom has started playing up. Sometimes it doesn't turn on at all, and other times it can take up to 30 seconds to come on. Both rooms are on the second level of our townhouse, so we're wondering if it could be a wiring issue or possibly moisture getting in somewhere. Looking for someone qualified to diagnose the problem and ideally repair it if possible. We're located in Morningside. Please let me know your availability and approximate call-out/inspection cost. Thanks!

2 x vintage lamps need new cords installed.

I have a working Peavy KB4 amp that needs to be serviced. Fault crackly Likely cause: dirty pots

4 taps washers (handbasin x 2, laundry and outdoor garden tap). 3 internal sliding doors - not sliding smoothly and jamming. Drill and screw brackets for curtain rail (brackets and screws provided).

We need some holes in our walls sealed and gaps along the outside of the house to block out mice.

I need help bringing a table up the stairs at my place in Morningside and assembling it. Table approx. 149kg Job includes: Carrying table upstairs Attaching 2 heavy base legs (assembly required) Will likely require 3 strong people Prefer someone experienced with moving and basic assembly ⏰ Ideally as soon as possible Please let me know your availability and quote.

My fan belt in my 1999 Nissan Navara keeps loosening Everytime I tighten it up it just loosens again after a while I want a mechanic to come solve issue for me and fix I have been told it may be a tensioner issue

Whenever it’s plugged in it starts flashing a red light and it makes a noise like a beep noise constantly

3 palm tree stumps need to be ground out to make room for a new fence. The old fence will be removed and the site accessible obtuse 27 Jan.

I have 1 x ikea cupboard and 2 x Bunnings garage storage to be assembled. Move 1 x tv and 1x armchair moved upstairs

Gym equipment partial dismantle move and assemble - from Morningside 4170 to Hawthorne 4171 Life fitness 95X

We are renovating a laundry and need some plumbing adjustments. The job is to: • Lower the hot and cold water taps for the washing machine. • Lower the two other water outlets on the right-hand side (see photo). • Make sure everything is well positioned for a benchtop and cabinet to be installed above

The standard laundry tap set juts out too far for my dryer. I have some shallow ones from Bunnings that you can install or I will consider other products if you have something to suggest. Needs to be finished today or tomorrow at latest please.

I need : - The carpet and underlay removed from two bedrooms which have are 3.8 x 3.8 m and 4 x 4 m . - Underlay and tack strips removed from a hallway (4 m x 0.9 m) - Tack strips removed from the lounge room (5.7 x 3.6 m) I can remove the waste and I am flexible on my budget, I plan to compare a few quotes. Thank you

I’m looking for a certified plumber to replace my kitchen tap, bathroom tap and shower fitting. Replacements already purchased, see photos.

I’ve bought paint and sanded the steps and pressure hosed. I need someone to come in, prepare and paint my steps two colours. Labour only, I’ll purchase what you need if I don’t already have it.

Will needs to fix insinkerator, no longer working, and replace 2 mixers (laundry and bathroom).

3 skinny palm stumps need to be dug out. See photos (1 on the left of the main palm and 2 on the right). We’ve cut them down but need someone strong to dig the stump and roots out. No access for a stump grinder.

Hi all, we need the following job completed today or tomorrow - dig out 4 x Lily pily stumps - dig 1 large hole for an olive tree Please see pics Based on Morningside