Find a reliable computer and IT professional in Adelaide

I have a shop in the city, There are network ports throughout the building and im not sure they work or not, i have nbn downstairs and my mesh nodes arent strong enough for upstairs and they drop out. Just needing help setting up the network for the shop,

Hi, i have a place in adelaide, there are network ports up and downstairs but im unsure if they are working, i have the nbn box and a mesh system but the signal drops out upstairs, im wanting to see if the network ports can be used or if extra equipment needs to be installed so i can have stable wifi upstairs.

purchased a canon TS5560 for home use, have tried to set up, printer is working not scanner. Apparently something to do with difference in wifi set up ???

Apple MacBook Pro 2017 MacBook Screen Repair – Lines at Top of Screen I’m looking for someone experienced with MacBook repairs to diagnose and hopefully fix my 2017 MacBook. The screen has lines appearing at the top, but the display works normally when the screen is positioned at certain angles, especially when the lid is almost closed. I suspect it could be a display/flex cable or connection issue. What I need: * Diagnose the problem * Repair the screen/cable if possible * Ideally avoid replacing the entire screen if it’s just a cable or connection issue Please only apply if you have experience repairing MacBooks and can explain what you think the issue is. I can provide photos/video of the screen issue if needed. Budget: Please quote your price.

The house already has NBN connected. The router is on the other side of the room to where I want it. The cable can be found in the roof cavity, it needs to be ''Teed" into, then the new cable can be pulled down through the wall by attaching it to a tv ariel cable that is not being used. The roof is easily accessible and I will have a ladder ready in position to enable access to the roof cavity.

We need an experienced printer/plotter technician to partially disassemble a large, heavy Océ ColorWave 345 plotter so it can fit safely into our building’s lift for relocation. The plotter needs to be separated into two manageable sections while protecting components, cables and connections. This task is for disassembly only. Removal, transport and reassembly are not required. Please only respond if you have relevant experience dismantling or servicing large-format commercial printers/plotters. You will need to bring the appropriate tools.. When responding, please briefly describe your relevant experience and confirm that you are familiar with this type of equipment

Malware clean required rubbing sore

Setup and Install Microsoft Teams Room Devices. Current room is setup as a Zoom Room. The main tasks are the ff Remove current Zoom Room Devices -PC - Ipad Controller -Camera -Speakerphone -Cables Install New Microsoft Teams Room Equipment -Dell Optiplex PC -Logitech Tap -Existing Camera -Existing Speakerphone

MacBook Pro A1707 space bar requires replacement. Can supply some spare parts for the job

Need someone with basic desktop PC hardware knowledge to remove all HDDs/SSDs from 4 desktop PCs. Some mounting screws are stripped so please bring appropriate tools for removing stripped screws. No repairs or troubleshooting required. Then need the PCs and a UPS taken to waste depot in Thebarton. Should take no more than 1 hour.

Assistance with setting up back end of FoundU app. Must have experience doing this.

I have this big oversized device that has many functions like internet access which now for some reason i can't seem to access the internet. I think it may have something to to with software needs updating but im not 100% sure as im really no good with tech stuff hence why I need someone who is.

Connect Internet - don’t have time amongst other work meetings

Nintendo switch not charging

Need an experience IT technician to go onsite to a client, have a look at why there is no internet and report back.

Check I cloud and local drive etc

my telstra device is not giving internet connectivity on modem.

Open a corrupted electronic file please

We have a house that was previously a display home. In the garage there are 4 ethernet points: 1 - Phone line - not used at present 2 - Internet/NBN - connected 3 - assume it connects to one of the two rooms that have a port 4 - assume it connects to one of the two rooms that have a port There are 2 rooms in the house where the cables in the cieling go and in each of those rooms there are 2 ethernet ports in the wall (in each room, e.g. 2 x 2 ports). I have tested the garage ports to all the other ports with my eero 3 router set up but doesn't appear to connect. Metricon let me know they may have decommisioned them during handover but i assume the cables running in the cieling still work and may just need to be hooked back up to the ports in garage (e.g. ports 3 and 4).

We are currently using Vision FTTB (TPG FTTB). An NBN technician has attended the site and provisioned a new port (see attached photo). We are looking for a network technician to assist with migrating our internet service from the existing FTTB connection to NBN. The NBN service is configured as IPoE (Dynamic IP) over VDSL. The site is located at Rundle Mall.