Find a cladding professional near you

Beauty salon in Richmond. One wall measuring 2m wide and 3m high require someone to fix the cladding onto the wall. If you can bring the tools/nail glue required. Have purchased the internal accoustic panel cladding which measures 2.7m high and 600mm wide. Have 4 pieces to fill the wall. Ideally to be done between 10-5pm on Sunday 29th June ( tomorrow).

Hi, I’m looking for some cladding work at my restaurant. Need help to cover some walls and hide visible pipes/wires. Material choice is flexible—open to your suggestions.

Front main door need to sand and stain and inter merbau cladding sand and stain

Install cladding to alfresco - cladding will cover the gutter as per the photo. Cladding is supplied

Looking for experienced person to install WPC CLADDING on to existing Alfresco ceiling and on side infills approx 15 sqmtr .

Description: We require a qualified carpenter or builder to replace an existing external window with a solid wall constructed using timber framing and blueboard sheeting. Current Situation: The existing wall is external and constructed of timber framing and blueboard cement sheeting. There is a rotted timber window frame measuring approximately 1200 mm (W) x 900 mm (H). This window needs to be removed and replaced with new wall framing and blueboard to match the rest of the exterior. Scope Includes: Removal: Remove the existing rotted timber window and frame entirely. Remove and dispose of all waste responsibly. Framing: Supply and install new treated timber framing to fill the window opening. Structural timber to be painted with waterproof membrane (e.g., Bitumen or similar) before joining to existing wall frame. Cladding: Install blueboard cement sheet cladding on both the external and internal sides of the new wall section. Ensure sheets are fixed and sealed to industry standard to match existing cladding. Waterproofing: Apply a waterproof membrane to external sheeting and joints as per standard exterior installation requirements. Finishing: External surface to be rendered and painted in “Ghost Grey” (with texture) to match the existing blueboard render. Internal surface to be flushed, sanded, and painted in “Ghost Gray (no texture)” (matching surrounding interior walls). Optional / Quoted Separately: Painting may be quoted as a separate item. Please provide a quote for painting as part of your offer, or state if excluded. Requirements: Must have experience with exterior blueboard and framing. Must provide own tools and materials (unless agreed otherwise). The window has oneside above a carport and the other side above a stairwell, safe work at heights methods to access the window that is above 2.5 m off the ground are to be used. Must leave the site clean and tidy.

Take of the broken panel and install new panels

We want to get a cladding done with the fire place to be fitted exactly like the photo attached. The dimensions of the wall are 3.4*4.1. Reach out If someone has prior experience with this type of cladding. We will provide the stone tiles and fire place.

I have a pre-existing 15m fence (see pictures). I want to leave the neighbours wood panels up. I want to clad my side with the Bunnings product linked below. Price to include installing rails onto the existing steel poles (including materials) but does not including the cladding material itself. There is also an old 1m mesh fence in about 7.5m which the price includes to remove and dispose of. Cladding material link which I will buy: https://www.bunnings.com.au/ekodeck-219-x-26mm-3-6m-carbon-batten-screen-castellated-panel_p0488949?store=6042&gclsrc=aw.ds&gad_source=1&gad_campaignid=11071326627&gbraid=0AAAAADtbEB8T1U-xi8rZOPHRsjWCSDtFb&gclid=CjwKCAjwravBBhBjEiwAIr30VF7rg5Rb4udBC6KbFguN3_nL-GRyUefwbmUM-t93CpVhGzm7mxbuYxoCBqMQAvD_BwE

Materials supplied. Looking for installation only. Ongoing job, and for the right person. Job is in East Cannington. Straight forward job. All fixings supplied. Ground floor and top floor. Good access. Easy height accessible by a three step ladder.

FENCE - FEATURE (DRIFTWOOD FENCE CLADDING FROM ENDURADECK). EXISTING FRAMING AND POSTS TO BE USED. Dimensions = 10.04m (length) x 1.80m (height), Price = 10.04m x $245.00 (price per meter). Driftwood cladding provided as well as the screws. Driftwood cladding length needs to be cut to size.

Need some 3mm flexible sheeting to be cut to size from 2400mm x 1200mm sheets to go onto 3 x walls using Sika 11FC glue and 6mm provided L trim in between joins. Height is 2200mm with widths 1500mm,1400mm,2300mm,375mm. 1 x wall has some cut outs for light switch and monitor,AC button. City apartments with parking and cutting onsite downstairs or in apartment. Need experienced people please.

Corner L piece to wall cladding came off after windy day, needs reinstalling by screwfixing and silicone sealing edges so its watertight. Screws need repainting to match wall. One corner only, is located on Level 1 so need to have ladder to be on roof. Corner then accessible via roof.

Move the panels in the pictures and 10 roofing sheets to the backyard. There would be about 30 steps over 50 meters each way. The concrete panels are large but relatively light. 40kg each. 2 people would be required due to size.

Need cladding done around garage external wall ( James Hardie linear board cladding ) at two sites Wynnum and cannon hill

Hi I have a job in Heidelburg that need someone to help me puting 2 small posts down and make a frame. 4 hours job from 8 to 12. 35 an hour. Not too much physical work. I do the work and just need a helper.

I need 6 sheets cut and installed in a Brisbane city apartment with the sheets here ready to go. A few Minnor cutouts and mitering and simple straight cuts . easy access, cutting onsite, glue up and done.

There’s an 14-17mm MDF piece and I’d just like to add another piece to bring it down to the level of the fridge. Just want it flush tbh, whatver the best way to achieve that is. Maybe add another piece of laminated ply/mdf ? Size would be 210mm in height and 9260mm in length

Need cladding installed in the missing section behind the TV. I will provide the cladding to match. Around 1-1.5metre

Inspect and advise if it’s faulty product . Piece of cladding came out throughout storms end of last year . Please advise your quote to fix it