Find a cladding professional in South East Perth

Looking for someone to install decorative timber wall cladding on two walls. I'll be purchasing and supplying the cladding from Bunnings, so this is for installation only. Photos of both walls and an example of the cladding will be attached. Please bring your own tools and ensure a neat, professional finish. Budget: $200 (labour only) Thanks!

I want someone who can clad the inside of a shed and put some insulation and clad the ceiling.

Install 3000x750 4.5mm Durasheet FC on existing wall directly nailed to studs - 10Lm wall x 3m high which has 2 slidding doors (2100x2700 & 2100x1500). It has 2 external corner and 1 internal - 8 Lm × 3m high of wall with panels installed as above. Ut has 1500x1500 window Works straiggtforward and material is provided by client so labour only See rendered picture below

converting carport of 680 x 370 cm to bedroom with ensuite the wall will be steel frame Need quote for external cladding and internal plastering

I will need someone to install cladding. We will need to meet first at the job site to run through all the details but it is to be installed on the exterior of the home . Cladding is from Newtechwood.

Install stone veneer cladding to 3 sides of wall and lay stone capping along top of wall. Mortar scratch coat or equivalent prep required. Wall length is 3.5m and height 0.75m (total cladding area is c. 3sqm) Water blade also required to be set into recess with cladding and coping to be adhesively applied over front and top of blade. Slate stone coping is 400mm x 250 x 38 so limited (if any) cutting will be required with 30mm overhang on all sides. Cladding pieces are 600mm x 150.

Looking to get stone work cladding above bbq area the stone cladding is 85$ per m2 from supplier, they’ve said a tiler or stone mason should be able to install pretty easily. Looking for quotes for roughly 4.16m2. Please see photos of cladding and are. Any questions please ask and feel free to leave a quote.

Description: Looking for an experienced fencing/cladding installer or carpenter to clad our existing Colorbond fence around the pool and back garden in white, and bring it to one consistent height all the way round. THE JOB The fence is currently at two heights because of a retaining wall. Total run is approximately 20.5 lineal metres. I want the whole run clad in white and finished at a single top height so the lower section gives proper privacy and the whole thing reads as one clean line. Think Bali villa – white, crisp, with palms going in front of it afterwards. Open to your recommendation on the system – aluminium or composite slats, vertical batten, or flat panel – but it needs to be a white, low-maintenance, exterior-rated product that won't yellow or warp in Perth sun. Please tell me what you'd use and why. The existing Colorbond posts and rails stay; the cladding fixes over or in front of them, and the low side gets a frame extension to reach the new height. ALSO PART OF THE SCOPE An electrician will be fitting up/down wall lights to the cladding and running cable behind it. I'd like the cladding installed so cable can run concealed behind it, with agreed positions for the light penetrations. Happy to have you and the electrician on site together to work that out. DETAILS Location: Piara Waters The fence is being cleared beforehand (removing some steel wall displays), so you'll be working on a clean fence. Photos of both fence sections and the retaining wall attached. Happy to send measurements or you're welcome to come and measure. WHAT I NEED IN YOUR QUOTE Supply-and-install price, the product/brand you'd use, how you'd handle the height extension on the low side, confirmation of pool barrier compliance, your public liability insurance, and a rough install duration. Please include a couple of photos of similar cladding jobs you've done. Budget: $5,000

Install Easycraft IKARA wood cladding onto Tiled breakfast bar front. Will require one 45degree corner join, the rest is flat.

Looking for quotes to have my letterbox and feature wall done (see photos for reference of what I am after) open to tiling or marble style cladding. Thanks!

Looking for someone to come out and quote small, single second-story wall on log kit-home. 25 square meters. Need it battened out over timber and clad in vertical Colorbond with custom flashings on the corners/log ends.

We are looking for an experienced cladding installer to assist Perth Cladding with casual and ongoing installation work across Perth. The work will mainly involve installing aluminium wall cladding panels, trims and flashings on residential and commercial projects. The ideal person should have: • Previous cladding, carpentry or construction experience • Their own tools and reliable transport • Good attention to detail • The ability to work safely and independently • Availability for casual work as projects arise Payment will be discussed based on the project completed.

I require a contract to replace one sheet of cladding hardiflex 3 x 1.2m in the carport. The existing sheet has been damaged.

Install James Hardie Linea Weatherboard Cladding on Cavity battens on Brickwork. Material will be provided. You will need to supply screws, nails and glue. House in Epsom Avenue in Belmont. Extent shown in Red. Cladding to match existing cladding that you see on the facade in the photo provided .

In need of someone to come sark batten and sheet walls of my shed. It is roughly 175sqm. All materials are ready to go just need installation. No flashing just trim and install sheets.

Wall Panel Cladding Installation in the Loungeroom I need someone to install 5 sheets of WPC in my loungeroom as shown in the images attached. I've been told you'd need 2 glue sticks per sheet. Also these sheets are like delicate plywood with cement backing so only bid if you have experience in this kind of work. Thank you in advance for bidding

Looking to revamp the face of a child care centre with three features of a box (to cover aircon unit) a small feature fence panel and and panelling to cover brick feature wall. Will choose either jarrah or aluminium jarrah look depending upon cost

Outdoor wall cladding Cut and fit the outdoor wall cladding to the brick wall. 2x 3.6m length wall height 1.6m2 and small infill area in the pics All materials available

Looking for an experienced tradesperson to install external wall cladding to my porch area Scope of Work: * Install weatherboard cladding to the porch front section under the ceiling( as per the drawing attached) * Ensure proper alignment, neat finishing, and weatherproof installation * Match preferred teak colour finish (or suitable equivalent) Requirements: (drawing attached ) * Proven experience with external cladding / weatherboards * Attention to detail and high-quality workmanship expected * Must bring own tools and equipment * Ability to work from plans/drawings (attached for reference) Materials: * Please specify whether you will supply materials or if I should provide (happy to discuss) Location: Forrestdale Mahala Estate Timing: Next month Budget: Open to quotes (please include labour + materials breakdown if applicable) Additional Notes: * This is a visible front porch area, so finish quality is very important * Please share photos of similar completed work if available

Internal: Replace gyprock to wall floor to ceiling and under window. Needs taped and sanded ready for painting. Main section is 2500(h) x 1600 (w) Under window 300(h) x 1800 (w) Needs new edging at window to tie into new sheets. External: Remove wood look Hardie plank and replace cracked fibre cement sheets behind. Dimensions similar to gyprock, may vary depending on joints in the sheets. Install new insulation to cavity and weatherproof membrane before reinstalling boards (need 2 new lengths for bottom that got damaged). Light metal frame structure Can discuss supply of materials