Find a professional staining service in NSW

Hi there Looking for someone to oil my outdoor deck in Oyster Bay. Includes 2 small sets of stairs (see photos). Job needs to be completed by Tuesday 28th of July. I’ll supply the deck oil, but please bring any other equipment you need. No sanding required, deck has already been pressure washed. Thanks

Need to sand, prime and stain the front door (door panels both sides and door frame). You need to arrange the tools to sand and stain. I will provide primer and stain. These posts on balcony needs to be painted (stain & varnish) as well. I need to get this done asap.

Re-attach the pole in the picture below, must be welded.

Front deck to be restained with 2 coats after replacing 5 boards showing signs of damage. The woodwork railings and the privacy screen also need staining. The area is 3mx4m. You are to supply all material as well as labour. Should be done in 4 hours maximum.

We need someone with the appropriate metalworking tools to cut 1 additional notch into 88 stainless steel table columns. Each column already has one notch. We require a second notch to be cut so the column fits over the two raised locating tabs (male tabs) on our table plate (see attached photos). Job Details: Quantity: 88 stainless steel columns Task: Cut 1 extra notch in each column Notch must align accurately with the existing notch and fit the table plate Clean, consistent cuts required (deburr sharp edges after cutting) We will provide a sample/table plate for test fitting before production Location: Ingleburn, NSW (work to be completed at our warehouse) Working Hours: Monday–Friday 6:00 am – 2:00 pm Requirements: Experience cutting stainless steel tubing Own suitable tools/equipment (e.g. tube notcher, grinder, milling machine, or other appropriate metalworking equipment) Good attention to detail and consistency Able to complete all 217 pieces on-site Please include: The tools you will use Your availability Your fixed price or hourly rate and estimated completion time Photos are attached showing: The existing table plate with the two raised locating tabs. The stainless steel column with the existing notch that requires one additional matching notch.

Hi, im looking for an experienced flooring contractor to sand and stain my hardwood engineered floor and deck before 7th August. The floor is located in Wollombi, Lower Hunter

Need two tap holes cut on a stainless steel bench.

3x4m deck 3x1m side 3 x stairs

Got 5 stainless steel benches delivered that need building right now

Big cabinet door needs to be fixed. The left door has come off completely. No idea how it has to be fixed? Soldered?

Replace shower stainless steel hose. Quote to Supply and Install

We would like to Stain our treehouse. It’s 4m by 3m. 2 coats.

I have a pine timber deck about 3m x 3.2m which needs sanding back so that I can stain it. I tried to Gerni off mould and now it’s patchy ☹️

Apply 3 sets of stainless steel wiring on a pine fence to replicate my other ones

A Deck with 2 steps and 2 planter boxes

You will need your own sander, oil/paint and materials. 4x4m wood deck. It's in good condition (as in no rotting), but needs a sand to remove some left over mould and then to oil. As we seem to have a few days of sunshine, I'd like this done ASAP. There is plenty of parking and I might be able to get you an undercover park too. There is a lift to the floor then one flight of internal stairs. An easy job but needed before Wed 15th April. Thanks

Stain the fence posts. Will provide stain and brush. Front fence (one side), side fence (both sides).

I have a small rectangle 1m x 3.5m of floor that needs to be sanded and stained with Brown Japan - need it to be done ASAP this weekend. Can be a simple Jobs doesn’t need a giant sanding machine. Understand that is not best finish but it’s a small thing don’t over cook it I don’t have tools or Brown Japan stain - materials on top

I have new driveway stainless gutter partiakly installed - its bottom embedded in concrete. It is 4.5m long and 250mm wide. It consists if 5 joints and 5 grills on top. The edges of them do mot quute match to eash other. I want the edjes bent bit and welded together, so they look nice. We can put some patch on the outside to make it stronger. Also need to weld stainless bolts/handles on the sides to be embedded in concrete, so the edges stick to concrete and do not push on the grills. II gave my estimate based on 3h job. I will pay more if we need more time. On the other hand, if you finish earlier I have other similar tasks to weld to use my 3h. I will be helping you. We can discuss details over the phone. This is a frontyard job, so it has to look nice. I expect you having over 2 years experience doing stainless weldings, and a proper welder and other welding tools. The quote should include your consumables like gas and stainless wire. I have 10A power points nearby.

Simon Says Juice. Based in Darlinghurst Sydney. Stainless steel bench. Nothing too tricky. Require a 10 cm diameter hole to be cut through it. Any man with the correct drillbit and a spare 30 minutes you can get it done. Don’t all rush at once!