Find experienced local carpenters in Outer East Melbourne

Job Overview Total Area: ~32 sqm Height: ~5.2m (High access/ladder work required) Materials: All Cutek stripping, cleaning, and staining products will be supplied and paid for separately. Contractor Requirement: Must supply and use a decent, high-powered pressure washer, lsdder, brushes, rollers etc Scope of Work Strip Old Coating (Cutek Stripper) Apply Cutek stripping product to remove the remaining stubborn areas of the old film-forming coating. The timber is mostly sanded, but all leftover old coating must come off completely so the new oil can properly penetrate the timber. Restore & Clean (Cutek Cleaner) Apply Cutek cleaning/restoring product to deep-clean the wood grain and prepare the surface. Thorough pressure washing is required during this step. Stain & Seal (Cutek Wood Oil) Apply the Cutek oil/stain product evenly across the entire 32 sqm area, including the upper sections up to 5.2m high

Need a local handyman/carpenter in Nunawading for a quick 2-visit task: Cutout 1 (Footing Probe): Cut a neat 450x450mm square hatch through internal timber floorboards at the living/dining threshold using a plunge saw/multi-tool. Keep the timber piece intact and screw simple timber batons underneath so it sits flush. Cutout 2 (Borehole): Drill a small 65mm round hole through the floorboard in the dining area using a hole-saw bit (save timber plug). Return Visit: Pop back after soil testing to screw both cutouts back flush and safe for my family.

. I need a new non-load-bearing plasterboard wall built inside a timber house. The wall will be approximately 3.3 metres long and 2.5 metres high. Please supply all timber framing, plasterboard, insulation (if required), screws and fixings. The job is for construction of the new wall only. No plastering, stopping, sanding or painting is required. Please leave the site clean after completion. Please provide details of your experience with timber framing and plasterboard installation, your public liability insurance, and any relevant trade licence or registration (if applicable). Please include photos of similar work you have completed.

Need a carpenter/handyman to repair a small wooden platform/decking in our garden.

Need to install a beam to make slanting deck roof end straight with a flashing.

Balustrade repairs, reinstate upright wooden pieces

I have a Walkin robe and cupboards but need some one to measure and install wooden boards for shelves

Need someone to install a door roller latch on my new door. Already have roller latch

We need framing panels constructed (temporary walls for trade show) and lining board attached to the front face. There are six panels. Each panel is 3000mm high x 1400mm wide. We will supply all materials. Construction to be done in our warehouse in Kilsyth by August 4. Budget $500. Detailed plans will be supplied for anyone able/interested.

I’m looking for an experienced cabinet maker/carpenter to design and install custom internal storage for three existing built-in wardrobes. The wardrobe frames and hinged doors are in excellent condition and will remain unchanged—only the internal fit-out is required. Current internals consist of one top shelf and one hanging rail. I’d like recommendations and a custom design including: * Adjustable shelving * Soft-close drawers * Double hanging sections * Long hanging section * Shoe storage * Handbag storage * Pull-out trouser rack (optional) Please include in your quote: * A proposed internal layout/design (hand sketch, CAD or 3D rendering) * Material specifications (e.g. white melamine) * Fixed price including supply and installation * Estimated lead time * Photos of similar completed projects

I’m looking for an experienced carpenter, cabinet maker, or skilled handyman to build a custom recessed shelving unit inside an existing wall cavity. The cavity was previously used for an old gas heater/flue, which has already been disconnected and removed. I’m looking to transform it into a modern built-in display shelf similar to the attached inspiration photo. Scope of work * Measure the existing wall cavity * Build and install custom timber shelving to suit the space * Install a timber back panel * Finish with a clean, modern frame around the opening * Build approximately 4 shelves (open display shelving) * Create a neat, high-quality finish Painting is NOT required. I’ll paint it myself after installation.

We have a few small areas of our home that need replacing/repair. Where it is beading for example this should be replaced. We seek a quality job by a qualified contractor. See photos also. Thank you.

Cabinet changes and dishwasher installation is required.

Need an experienced carpenter/handyman to finish and adjust 4 internal doors in our house. Tasks include: * Fit and install door handles/latches on 4 doors * Trim/plane doors where required (some doors appear too large for the frame) * Align doors and catches so they latch correctly * Check overall fit and if you could paint the doors too thats even better All doors are already in place but have not been finished properly. Looking for someone with experience fitting internal doors and door hardware. Please bring the tools required for trimming and fitting doors

Looking for a skilled cabinet maker, carpenter, or handyman to build and install a custom floor-to-ceiling storage cabinet/pantry in my apartment, based on the attached sketch. The cabinet will be positioned around an existing structural column/wall and should maximise storage while maintaining a clean, modern look. Please provide your offer.

Shave down 10mm from door with track saw and re install door ( door already has hinges just need to shave down height due to flooring) Ringwood located

Need to cut a round or square hole on this timber as marked. Anyone can help with this?

Stain our deck in the backyard and enterance

We need doors and windows repaired. About 6 awning windows with faulty motors and a a couple of doors needing repair. The task is for someone to come in, have a look and quote

I will need some help to drill this plastic plate onto this wood frame, I have tried with my screws and drill( and it’s bit hard to do so).