Find experienced local carpenters in Inner South West Sydney

Installing villa board on the eves of a shed. Already have all the sheets they just require cutting up and installing on the eave. Have nails also. Dimensions of the shed are Shed 4300mm width x 8800 length x 2600mm. Should only take 1-2hours. - Due date: Before Sunday, 10 December 2023

Quote please whenever you have time. Timber installation. We have done it last year but now it started to crack.

Kitchen updates as follows: 1. extend right side of kitchen with laminated cabinetry to match existing kitchen build. This is needs to be from floor to almost ceiling like the other side of kitchen 2. remove shelving on side of cabinets on the left of the kitchen and extend matching existing laminated cabinetry 3. add doors to match existing laminated cabinetry to the cavity space above the fridge 4. Some of the laminate is also peeling off the drawers so will need to resurface these and perhaps all cabinetry to match 5. Hinges in drawers will need updating (I can send pictures of our old ones that need replacing and can send photos of some new ones we have that work well). We would need 10 hinges for this 6. There's a cavity near our oven that needs to be covered so we would need to fit this in properly. Could we make this functional somehow with a pull out spice rack or something? Would really appreciate someone with attention to detail and has the qualifications/experience to build something like this. Bonus if we can see some plans drawn up in advance of the updates - Due date: Flexible

Assembly of plastic garden shed. Please see link for details of Shed. https://www.landera.com.au/garden-sheds-structures/plastic-garden-sheds/maze-skylight-4x6-pent-shed/ - Due date: Needs to be done on Tuesday, 5 December 2023

There is an interior wall between my lounge room and dinning room. I need to cut the length 135 cm and width 30 cm to make balance with other side bench top. - Due date: Before Wednesday, 6 December 2023

New bathroom vanity with laundry cabinet and stone bench top. Cabinet materials to be provided by the carpenter. Stone bench top can be provided as well, or let me know if i need to supply it. The dimensions will need to be confirmed. - Due date: Before Sunday, 17 December 2023

Laundry renovation required Cabinets to be installed for storage As well as dryer to be placed on top of washing machine In the plans originally I was going to place a sink and bench on the right wall however, I no longer wish to have this as I'm more interested in having more cabinets and storage space. Thank you - Due date: Flexible

Cut and help me put the benchtop on

Small job for experience handyman/tradie/carpenter. Laundry is just 1 cabinet, being a Base Filler Panel, 800mm Base Cabinet, Base End Panel. Taps will need to be lowered below proposed bench height. Pantry is 16 cabinets (as shown on the plans). This is simple install only with electrical work being done by a licensed electrician. IMPORTANT NOTES: BASE CABS IN PANTRY AREA ARE TO BE CUT BACK BY 100MM SO THAT FINISHED SOLID BENCHTOP WILL BE 500MM DEEP. INSTALLER TO LOOK AFTER THESE SPECIFICS DURING INSTALLATION. WHERE FILLER PANELS ARE REQUIRED: INSTALLER TO MEASURE TO FIT ON SITE - FILLER DIMENSIONS ON PLAN ARE A GUIDE ONLY. INSTALLERS TO PROVIDE ADDITIONAL SUPPORT FOR CABINETS AND MOUNTING FILLER PANELS. PANELS TO BE CUT ON SITE BY INSTALLER AS REQUIRED; PLEASE ENSURE ANY CUT EDGES ARE SEALED WITH PVA. SEAL WITH SILICONE WHEREVER A PANEL MEETS THE FLOOR. ****PLEASE BE ADVISED; PANELS MAY NEED TO BE PLANED DUE TO FLOOR IRREGULARITIES. INSTALLER IS TO CONFIRM This is a small job and should take no more than 1 day. We have employed a construction hand who can assist with the install if needed. Reasonable quotes only. - Due date: Needs to be done on Friday, 24 November 2023

Need to rebuild a three step stair’s using pine wood or similar material. Dimension width 110cm x depth 800cm x height 270cm quote is for labour only. cost can be billed separately or i source the material Existing metal rail is kept - Due date: Before Monday, 27 November 2023

I have put the walls together of this easy shed but have ran out of time and patience to complete, looking for someone handy to Come and complete. Pictures of where I’m up to supplied and what it will look like once complete. Looking at around $50 per hour can’t see it taking someone skilled more than 3 hours - Due date: Flexible

We're looking for an experienced carpenter or assembler to assist us assemble a Warrigal Cubby House with slide: https://www.lifespankids.com.au/collections/cubby-houses/products/warrigal-cubby-house-with-green-slide The cubby houses is already partially assembled. After the base and frame are set up you add the pre-made walls, floor, and roof saving time and hassle. A comprehensive step-by-step instruction manual is included with the cubby house. We wish to move the slide from the front of the cubby house to the side, so we need someone confident enough to make this small alteration. There will be at least one other person on-site to assist with assembly. Any other questions, please feel free to ask. - Due date: Before Saturday, 9 December 2023

We need someone to install an additional rail for additional hanging space in two different built in wardrobes. We need someone to supply all the equipment required including the rails (we don’t have these) which we will pay for upon proof of purchase. This needs to be done professionally and with care as it’s a rental. It has been approved by the owner of the property. Refer to photo- second rail to be installed halfway down, identical to top rail. - Due date: Needs to be done on Thursday, 16 November 2023

Price is only to visit & quote on total job. Needs to be done asap

I need to have two custom built floor to ceiling after market wardrobes reattached to the wall and fixe wheels on at least two doors to allow them to run on tracks - Due date: Flexible

I have a shed that I purchased from Bunnings that I need put together. - Due date: Before Thursday, 19 October 2023

I need someone to put together 2.38L x 1.31W x 1.82H Giantz Garden shed Flexible hours. Easy to assemble location. Use of tools available to help - Due date: Flexible

I am seeking an experienced carpenter or woodworker to design and construct a custom wooden box to house and protect my swimming pool pump equipment. Length: 2100mm Width: 1030mm Height: 1080mm - Due date: Before Friday, 6 October 2023

32 sqm - good but old timber deck need a lot of nails hammered in chemical clean light sanding 3 oil based coats I will supply liquids required for job - Due date: Flexible

I’ve got a half finished door installation in my home. I need a handyman / carpenter to help finish it off. Door is hung but it needs the frame constructed and installed. Bunnings is around the corner so if you could visit, plan it and then come finish it I’ll pay for everything plus your time and skills. - Due date: Flexible