Find experienced local carpenters in Gladesville

Fill a short form and get free quotes from local carpenters in minutes

4.5

Excellent rating - 4.5/5 (9200+ reviews)

A range of carpentry for all your needs
  • Cabinet making
  • Custom shelving
  • Wood repair
  • Custom made furniture
  • Deck sanding
  • … or anything else
It only takes 2 minutes. And it’s free.
Up to 50% cheaper than franchise dealers
Up to 50% cheaper than franchise dealers
No job too big or too small
No job too big or too small
Free insurance coverage
Free insurance coverage
Secure cashless payments
Secure cashless payments
Same day / next day service available
Same day / next day service available

Best rated Carpenters in Gladesville

Now Available!
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

Recent Local Carpentry reviews in Gladesville

"James was a pleasure to deal with. Had all the tools on hand and very obliging and patient when the job got a bit tricky. Clean and careful with my home. Would recommend. "

Cut down a benchtop & install as a shelf

$120

"Professional, on time and most importantly did a fantastic job! Even cleaned up and was a complete gentleman. Would highly recommend!! "

Handyman/tradesmen to cut boardroom table

$100

"Great to work with, thank you Rob. "

Take out drawers and fit in dishwasher

$50

"Good recommendation on solution"

Build pool pump housing

$200

"Adam did a really good job, and even took the trouble to make a missing part for the repair. The whole job was done effortlessly and without fuss. I would use Adam again and recommend him highly to anyone else who requires a proper cabinet maker Good work, excellent service and customer care. You deserve your 5 gold stars"

Cabinet maker needed

$100

"Howard was very professional about the job. He's a very nice person and he did a good job. "

Cut off a skirting board and build bedframe

$100

What's the average cost of a carpenter in Gladesville

$120 - $450

low

$120

median

$236

high

$450

Low, median and high bar chart distribuiton

Average reviews for Local Carpentry Services in Gladesville

based on 38 reviews

4.97

37
1
0
0
0

What is Airtasker?

1

Post your task

Post your task

Tell us what you need, it's FREE to post.

2

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

3

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available!
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500
Airtasker has over 38 Carpenters in Gladesville, with an average rating of 4.97 stars from 38 reviews. Get in touch with Carpenters such as Howard M, Lachlan T, and Bradley S today to get a wide variety of Local Carpentry jobs done.
Don't live in Gladesville? We also have Carpenters available in Murray and Richmond Tweed available today.

Recent Local Carpentry tasks in Gladesville

Restaining the pool deck

$500

Gladesville NSW, Australia

24th Oct 2021

Pool deck needs a bit of a touch up after the last summer. Looking to match it to the darker wood pictured towards the end. Needs decking oil etc I assume. Dont have any of the materials. Theres an odd screw/s on the deck that need tightening too. - Due date: Before Monday, 8th Nov 2021

👌🏾👌🏾 superb detail

French Polisher / Joiner

$600

Gladesville NSW, Australia

14th Jul 2021

I imported so backdrops that incurred minor damage during import. The backdrops are a combination of sized, but are heavy as they are made of wood. Job can be completed anytime, just need back by August if possible. Damage needs to be cut away, bogged, prepared and sanded. I would like to paint the pack drops a different shade of the same colours so no need to match perfectly. I will have to pick the colours for you. Please quote including pickup, works, timing and return. Proven experience is required.

Cut notch out in mdf kickboard

$150

Gladesville, New South Wales, Australia

13th Jun 2021

Need to cut a 7mm notch in kickboard to allow clearance for new dishwasher door to open

Great service, on time , well organised and did a great job. Highly recommend Steve

Doors planed, built in robe door way widened

$1,000

Gladesville NSW, Australia

22nd Apr 2021

Bottom of doors planed to allow for thicker carpet. 10 hollow doors. Doorway of small built in robe widened, Skirting boards removed and replaced in 4 bedrooms and hallway.

Fantastic, I would be very happy to recommend Bradley to friends. Incredibly helpful, did a great job and communicated really well. Thanks guys!

Re-fit above ground pool timber trim

$90

Sydney, New South Wales, Australia

18th Mar 2021

Our above ground pool has hardwood timber trim around the edge of the deck it is set into. Several of the the trims have come loose, one has come off. The task is to refit the loose trims - and resecure all of the currently attached 1m trim sections - using corrosion resistant screws (pool is salt water) The timber trims and decking surrounds are hardwood. Holes for the new screws will need to be drilled, and the new screws drilled in far enough for the heads to be recessed - avoiding the risk of injury to bathers.

Mitre cut of approx. 20 x 19mm merbau decking

$200

Gladesville NSW, Australia

4th Feb 2021

I have 18 corners requiring mitre cuts, 1x49 & 1x48 degree corners requiring cuts too. the merbau decking panels will sit atop timer sleeper retaining walls for a lawn space and garden beds as capping. seeking a quote for the mitre cuts however you are welcome to quote for the whole job - cutting & attaching the merbau capping.

I can't rate Lachlan highly enough. Attention to detail, quality workmanship, efficient too. He's a true professional and I'd have no hesitation requesting his services for future jobs or providing my recommendation of Lachlan. Lachlan, thanks again.

Carpenter to help build a timber shed

$400

Gladesville, New South Wales, Australia

14th Dec 2020

Shed is a DIY build Stilla shed. 3mx2m. Comes in a kit. Need someone to help me put it together asap. Also includes building a frame (included in the kit) to build the shed on, which needs footings sunk into the ground. Ideally a carpenter or builder who has done a few of these before, and can complete before the weekend. Instructions say allow 4-5 hours. Need your own tools. Sooner the better.

What a legend. I’m handy on the tools but Peter is next level. Hard working and top quality work. Many thanks

I need an encasing built.

$300

Gladesville NSW, Australia

26th Sep 2021

I need a carpenter or handyman to build an encasing for a fireplace similar to the attached picture. I have the mantel piece i just need new side panels and mantel top. It will also need to be stained in the same colour. - Due date: Flexible

Please quote to build an outdoor bar table

$25

Gladesville NSW, Australia

22nd Jun 2021

I need a narrow outdoor table built for a balcony which is undercover but is exposed to rain. Please see the attached photo which is furniture built into the Ikea store at Rhodes. The table top is the RUNNEN flooring sold at Ikea. The table dimensions - approximately 40cm wide, 2-2.5 metres long and 90-100cm high. Please include in your reply the number of hours you think - roughly - it should take to build, when you could have this completed by and your hourly rate [No particular hurry so this could be completed at your convenience]. Could you also please provide an idea of the best material for the framework and if you would be able to purchase this or I would need organise. If you think of anything else that I need to be aware of, please advise. Thanks, Tina

5 pieces of furniture up 4 sets of external steps

$200

Gladesville, New South Wales, Australia

22nd May 2021

All measurements approximate One large 2500x450x950 wooden sideboard One 1700x1200x450 wooden wardrobe - with built in mirrors One wooden side board 1900x1400x450 (splits into 2sections) 2 rugs 3000x2000

Excellent job - highly recommend

6 hours work for a qualified carpenter

$300

Gladesville NSW 2111, Australia

13th Apr 2021

We have a few small jobs required to finish off a simple warehouse fitout. Four ceiling rafter beams to nail in. (Already laid in place) Approx 10 standard gyprock sheets to install as part of the ceiling (glue and screwed) 4 standard door handles to install 4 window architraves to install You will have myself and a labourer to assist you. Must be able to complete either Thursday 15th, Friday 16th or Saturday 17th this week. You need standard tradie tools including a pin gun. Must provide certificates and insurance documents Thanks

Build bed frames & seating in caravan

$350

Gladesville NSW, Australia

27th Feb 2021

I'm looking for a carpenter or handyman with building experience to assist in my caravan renovation. I require a queen bed frame, bunk bed frames and seating to be built. There is no power at the site.

Handyman/Carpenter to build small timber deck

$250

Gladesville NSW, Australia

29th Jan 2021

Need to build a small deck at back door approx 1sq metre, with steps

Shed Installation

$200

Tennyson Point NSW 2111, Australia

8th Nov 2021

Shed installation required for Stratco HM4 2.21 x 1.47 x 1.9 - Due date: Flexible

Build a shed

$150

Gladesville NSW, Australia

12th Sep 2021

I need a small shed 1.5m x 1.5m x2.1 installed in the rear yard.

Quote to extend outdoor timber deck

$20

Gladesville NSW, Australia

15th Jun 2021

Quote required for an extension to current raised timber deck. Extension to be 20 sq. metres, approximate measurements 9.4mL x 2m W x 1m H. Quote to include stairs.

Cabinet Making Required

$150

Gladesville NSW, Australia

26th Apr 2021

We have pipes exposed after installing a gas heater. We need to have the pipes boxed see picture

Build planter box and relocate timber sleeper

$200

Gladesville NSW, Australia

5th Apr 2021

To the right of the photo is a higher grassed area approx 5m wide. This level is to be extended to the top of the photo towards adjoining house by approx 700-800mm to create planter box area. It is approx 1m high at the moment and slopes down. Finish must match existing. To the left of the photo is a timber sleeper. This needs to be brought back as far as possible in alignment with the drainage pit and then levelled back to match the bottom of the last step (to level out grass area). It can stop as it meets the end of the planter box area to be installed. Open to ideas and indication of pricing based on amount of work required. Happy to arrange visit for measurement and quotes.

Order and install wrought iron balustrade

$100

Gladesville NSW, Australia

13th Feb 2021

Hi I’m looking for a quote for the labour and material cost of installing a wrought iron balustrade. We currently have a suspended curved staircase with all the timber components seen in the picture, with a wired balustrade that can be easily removed. What would be the cost of installing the wrought iron balustrade seen in the picture? It would also need to be installed along the dotted line in the floor plan on the upper floor.

Stain and install a hardwood barn door

$500

Hunters Hill, New South Wales, Australia

10th Jan 2021

We have a raw, oak hardwood barn door (with track and handle) to be stained and then installed into a stud wall. Door is 2260 x 1020 and very heavy. Timing: Jan/Feb.

Hamish arrived on time and was easy to deal with. He had great care with the job and attention to detail in understanding how the installation kit came together, including calling the supplier to confirm some of the measurements that were not in the instructions. No hesitation in recommending Hamish for other carpentry work.