Find experienced local carpenters in VIC

Seeking joiner who can use our GoCabinets flatpack account to create shop drawings, finalise design, order custom joinery in flat pack and then install. Labour only required. We will provide all material.

I need someone who does this type of thing for a living. Not a home handy man who wants to give it a go like me. I've just replaced the blades on my HalfCo WoodMaster 2015. I need the blades adjusted so they will cut flush. There are only two blades. I can bring it to you if you are in the Glen Iris 3146 area.

Reception Counter and associated rear shelving: As per drawing A030 and A031. Prize unit shelving A, B, C and D, as per A028 and A032. Box units marked E, F and G, as per drawing A028 and A033. Square merchandising unit as per A034. Arcade entry portal to A013.

Need a wooden unit Built please see dims and ref image- happy to discuss

Joinery Installation Kitchen, Bathroom, Powder, Laundry, 6 x robes

I have an outdoor BBQ unit. There are three tasks - 1. I need someone to repair the cabinet door that has come loose from its hinges. The hinge mounting plates have stripped out of the cabinet frame (see photo). This has been repaired before by the installer and failed. 2. The cupboards need cleaning. 3. I need a way for the doors to be secured closed, so that water/weather does not get inside the cupboards. I am guessing that water damage has caused this.

Need an LED strip light with diffuser installed inside a recess that is 18 wide x14 deep x 950mm long

I have a few things I need done in my apartment. An ironing board that I’d like turned into a normal drawer, a pantry I’d like to wheel out further if possible, some shelves I’d like drawers (about 6 - 8) and a sliding door to laundry that gets stuck and needs trimming.

I require a experienced joiner to refresh outdoor cabinetry that is looking old and weather worn. Needs front surface of cupboards and drawers replaced and top of cupboards. Inside of drawers and structure seems fine. Would consider complete rebuild if absolutely required.

Need joinery, overhead cabinets and shelving

to remove existing caulking and re caulking in bathrooms and kitchen and laundry

I’d like to have supply and install tv cabinet 4m in length. Similar to ikea besta tv unit dimensions. Picture is my current space. Would like plinth at base.

We’re looking for experienced joinery installers or cabinet makers to help assemble and install several large, pre-made pieces in an office setting. Scope of work includes: 1. L-shaped cabinets Two sets: • 3.3 m (H) × 5.4 m (W) • 3.3 m (H) × 3.3 m (W) Most carcasses are pre-assembled; only sections 6 & 10 are flat-packed (see attached photo for reference). 2. 3 × bookcases Carcasses pre-assembled but split into two parts each. 3. 1 × glass-door cabinet Carcass assembled; glass doors need installation. 4. 3 × desks Drawers and cabinets pre-assembled, require installation only. Additional Details: All materials are supplied. Taskers must bring their own tools, dolly and ladder. Some cabinets include LED lighting, which will need to be connected and working. The site is tight and currently filled with cartons. Items (2, 3 & 4) need to be carried up to Level 1 — if some units don’t fit the stairs, partial disassembly may be required. This is not a one-person job due to cabinet size and weight — ideal for 2-4 installers. Realignment of doors may be required after installation to ensure proper fit. Packing and removal of rubbish from the site is required after completion. No installation manual is available, so an experienced joinery installer is preferred. Quoting Instructions I prefer an hourly rate quote since the total workload may vary. Please let me know your rate per hour, estimated total hours, and whether you’ll be working alone or with a second person. I’m happy to adjust the total payment after completion based on the actual time required.

Hello, We are looking for an experienced carpenter, joiner, or skilled handyman to inspect and secure some retail shelving at our store, in Epping. The Issue: Several layers of our custom wall-mounted shelving units have started to pull away from the wall. This is a significant safety concern as we are worried about their stability and the risk of collapse. The shelves appear to be glued and possibly screwed to the wall, and some of these connections have failed. The Job: This is primarily an "inspect and secure" job. The scope of work includes: 1. Attending the site to thoroughly assess the structure and stability of the entire wall shelving unit. 2. Identifying all the points where the shelves have detached from the wall. 3. Supplying and installing small, discreet L-brackets underneath the affected shelves to securely re-fasten them to the wall. 4. Ensuring the installed brackets are strong, neatly fitted, and provide robust support to prevent any further movement. 5. Leaving the area clean and tidy. The primary goal is to make the shelving safe and secure. Please note: The successful contractor MUST supply all necessary materials, including appropriate L-brackets and wall fixings (e.g., plasterboard anchors, screws). The cost for these materials must be included in your offer. Requirements: - MUST have proven experience with commercial joinery, cabinet making, or carpentry. - You must supply all your own tools AND all necessary materials (as mentioned above). Location & Timing: Location: Pacific Epping, 571-583 High St, Epping VIC 3076 (exact location will be provided once the task is assigned) When: As this is a safety hazard, we need this repair completed as soon as possible. Please state your availability in your offer. Please provide a comprehensive quote for the complete job. Your offer should include your call-out/inspection fee, all labour, and the cost of supplying all required brackets and fixings. Thank you.

Location is northcote 3070 Hang 4 paintings One soap dispenser Attach measuring table to wall Fix wonky cabinet joinery on 2 buffet tables

Install 2 new full height pantry doors, the existing have delaminated. Just installation, no materials.

Rain water drainage join plastic socket replacement. Plastic joint that connect gutter pipe to ground drainage pipe is broken it needs new join socket. Please see the picture.

Join glass and wood cabinet

I am seeking assistance to re-hang our joinery door. It fell off its hinges so I am unsure if there is any permanent damage to the hinges themselves. There is a Bunnings 5mins down the road if new hinges are required. The door is extremely heavy and will likely need two people to rehang.

Just looking for someone to finish off our kitchen, we are just needing drawer fronts and doors to be done, framework has already been completed need someone to come and measure and quote.