Find experienced local carpenters in North Moreton Bay

1 decking board, edging & skirt on 2 sides

Need a qoutation to install timber pergolas roughly 2X6 meters at the poolside

To assemble the shoe cabinet. The dimensions are 120L x 33.5W x 101.5H.

Hi I have an old Indonesian cabnet that im wanting to use as a kitchen island. So would be needing Timber legs added for the Height.

Paint and Prep – Front Entry Timber Feature Scope of Work: • Prepare and repaint front entry stained timber feature (above porch area) to a high-gloss white finish. • Includes light sanding, surface preparation, primer (if required), and two coats of premium, exterior-grade, weather-resistant gloss white paint. • All adjacent surfaces (render, ceiling, guttering, and lights) must be masked and protected during painting. • Work area is easily accessible from the front lawn using a step ladder or small scaffold. Materials & Conditions: • Contractor to supply all materials, paint, primer, and tools. • Paint must be UV-stable, weather-resistant, and suitable for Queensland’s outdoor climate. • Current stained timber is intact but slightly weathered — sanding required for smooth adhesion. Objective: Deliver a clean, professional, and long-lasting gloss white finish that enhances the modern look of the home’s façade and withstands outdoor conditions. Preferred Timeframe: Completion within the next month (weather permitting).

1. Timber ramp to be removed- approx 3 m long and disposed of most of the timber 2. Balustrades to be re-attached as some have rotted a bit 3. Decking to be re- nailed here and there 4. New balustrade (see blue line on the photo, construction details tbc) 5..And about 4 timber treads to be replaced. (Metal stringers are ok condition) 6. And 4 timber treads to be replaced, timber strings to be assessed but I think it is ok.) I can send more photos as I am at the house tomorrow. (8th) Thank you

I have a Acacia hardwood panel (2400mm × 900mm × 33mm) that please needs to be trimmed to 2000mm × 700mm. You’ll need your own circular or track saw with a fine-tooth hardwood blade, plus clamps and a guide rail or straight edge. Work area is flat and with power, and you will need to have had experience in doing this before. I can assist with carrying and holding. Thank you.

I have two marquis cabinets that sit on top of each other. I would like fix to wall and installed as custom fit with no visible gaps at side or ceiling. I have an example of a similar cupboard that I had installed in my main bathroom (see second picture) . With this job we do have cornice to work around. Must be licensed/ qualified

have an old 1950s kitchen that we are doing up. I need one of the wallcabinets removed from the wall, cut in half and then remodelled into 2 lots of open shelving with glass doors removed, and then placed back on the wall one above the other. Cabinet is heavy solid wood and structurally sound and sturdy. Pictures below

QBCC licenced insured Carpenter to replace back stairs on our Queenslander, in the style of our new set at the back of house. Rough Estimates 1st before site inspections to save us both time up front.

Hello, We are looking for a skilled handyman, joiner, or cabinet maker to repair a broken drawer at our retail store, in Morayfield Shopping Centre. The Issue: A drawer in our main counter behind the sales desk is broken and will not close fully. It appears the drawer runner (slider) has failed, as a small ball bearing from the mechanism has fallen out. This is a safety and operational issue, as the drawer protrudes into the staff walkway. The Job: The task is to replace the faulty drawer runners to make the drawer fully functional again. The scope of work will involve: 1. Carefully removing the drawer from the cabinet. 2. Assessing and removing the old, broken pair of drawer runners from both the drawer and the cabinet. 3. Supplying and installing a new, high-quality pair of drawer runners that are the correct size and weight capacity for the drawer. 4. Correctly installing the drawer back into the cabinet. 5. Testing the drawer to ensure it opens and closes smoothly and fully. Please note: The successful contractor MUST supply the new replacement drawer runners. The cost for these materials must be included in your final offer. Requirements: - MUST have proven experience with cabinetry repairs and installing drawer runners. - You must supply all your own tools AND the new replacement runners (as mentioned above). - Ability to work professionally and cleanly within a live retail environment. - Public liability insurance is required. Location & Timing: Location: Morayfield Shopping Centre, 171 Morayfield Rd, Morayfield QLD 4506 (exact location will be provided once the task is assigned). When: As this is a staff safety hazard, we need this repair completed as soon as possible. Please state your availability in your offer. Please provide a comprehensive quote for the complete repair. Your offer should include all labour costs and the cost of supplying the new drawer runners. Thank you.

Looking for a good carpenter to work in with me on upcoming bathroom renovations.

Remove existing timber frame

Sand parts of deck first then stained it ,have own stain size 7m x 3m approx

We’ve just moved into our new place in Narangba and need help adjusting our kitchen cabinetry. Our fridge is just a bit too wide (about 3 cm), and the cabinet side panel is blocking it from sliding in, so we’re hoping to trim or reshape that side to make it fit. We’re also looking to make space in one of the other cabinets for a dishwasher. Can you please provide quotes for these?

Have replaced new chain on roller blind new joiner won’t go through cassette

have an old 1950s kitchen that we are doing up. I need one of the wallcabinets removed from the wall, cut in half and then remodelled into 2 lots of open shelving with glass doors removed, and then placed back on the wall one above the other. Cabinet is heavy solid wood and structurally sound and sturdy. Pictures below

Two kitchen, dining cabinets need scotia laid on timber laminate floors, approximately 3m long , each cabinet. Will supply scotia, must be able to cut angles !

Some simple tasks to freshen up a house before it is re-rented. 1) Touch up some walls with paint on a roller. 2) stain a deck with a long handled deck stain applicator. 3) paint the ceiling of the kitchen with a long handled paint roller. 4) couple of other little tasks that don't require any real skill. 2 days of quite laid back work.

need a person to help with cutting timbers and architraves and skirting around house now will need to be done by 11:30