Find experienced local carpenters in North West Perth

Just got a new kitchen oven and microwave to replace an old in-built one. Need a new surround/cabinet built and installed for the oven and microwave as it’s just sat in the old void at the moment

Under-stairs cabinet – quote request Looking for a carpenter or cabinet maker to build a custom unit under my stairs. Rough size: - About 2800mm long - Around 700mm high on the right, sloping down on the left under stairs - Depth roughly 600m Idea is a built-in style unit with a mix of sliding doors and some open shelving. Shelving on the sloped end (left), but happy to take advice on the best layout and proportions. Materials: - Open to suggestions, but ideally something cost-effective (laminate or painted MDF) - cheaper wood such as pine also an options Other details: - Sliding doors preferred as the sofa is close to the stairs so you would not be able to open hinged doors. Please include rough price, timing, and any suggestions you’d recommend. I will upload a sketch ASAP.

Need a carpenter to fix shelves that have collapsed in my walk-in wardrobe and add some additional shelves above

Minor Restoration on timber decking. Sand, replacement nails & stain size 40sqm.

Entrance door broken into, looking to fill clamp sand and paint original door Can be done, don’t have the time

Pay is more for a carpenter and if you have skill can do around 45 per hour negotiable. - I’m after a roof carpenter/carpenter or hammer hand with experience on tools to come help out on a timber stick roof, I have casual work for around a month. Hammer hand - 35 per hour.

I need to install my oven and microwave in this opening but as it was an old cupboard the oven is around 20mm to small for the opening and same with the microwave , I need to find some kind of trim kit so that I will all look good in the opening . I will also need to install a timber shelf to carry the weight of the microwave ( I have the timber ) Just not sure where to get the trim kits or if the installer could provide them ?

Cabinet with doors under stairs for storage

I have a door with a “ghost rail” system that I need put on. The door itself needs routed and some cuts made on it. The dimensions on the picture should give enough info on what I need. Door is 1070x2300x40

We are looking for kickboard replacement with colour match to existing cabinetry/boards. These are the built in type cabinets, double layered sitting on jarrah floors. Seeking skilled carpenter/cabinetmaker. 6.4m of kickboard in total, 1.2m in damaged area. Plus other assorted carpentry jobs; - wooden window frame rot repair - timber strut / brace replacement on tiled awning, paint to finish - fascia / scotia repair - wall recess mdf/board, and wall patching

Needing a qualified carpenter or experienced handyman to install structural timber support (blocking/noggins) inside my roof space. This timber needs to be installed between existing ceiling joists so that we can assemble a floor-to-ceiling room divider (L:180cm), ensuring it is securely tensioned and screwed into ceiling. - Please include cost of structural timber in quote (90x45mm (or wider)) - Please bring a vacuum for any dust/debris. Please note: You are only responsible for installing the timber support in the roof. We will handle the actual assembly and tensioning of the room divider once the timber is in place.

Install- sliding door,straighten bathroom walls,build soap niche

Kitchen installation of an ekitchen cabinets. All pre assembled. No benchtop installation required. The confirmatory measure has already been done. We want someone with either cabinetry or carpentry trade. Will need to possibly cut around PowerPoints etc. Part of one cabinet will not be able to be installed until after the benchtop is in.

I have ordered laundry cabinet from bunnings, i am looking for handyman to install it. The benchtop needs to be cut to fit the sink and tap.

Hello, need a handyman to do some minor work to make pool fence compliant following a recent inspection. There is a small brick ledge next to the pool fence that is interpreted as a climbable ledge. Need to install a 100mm wide piece of timber above that ledge to make it at least 900mm high from the ground. I would estimate the linear length of timber required would be 1.5m maximum. You need to supply the timber, cut it to length around the zig zag, and fix it to the brick wall so it does not come off over time. Please coat it with paint that we will supply. Please supply your own tools and equipment.

I have a kitchen cabinet that for lack of a better word has snapped!? The front panel seems to have broken away from the sliding part. I have pictures. Happy to negotiate.

Need door removed and new door hung Works involved - - removal of old door - new door cut and hung - door handle to be fitted (using existing) I have already purchased new door and is at the house

I have accidentally dented an internal door in the house. I would like to move / swap this door with another internal door in the house. I have ensured the size and hinges of the door are the same. I need a carpenter or handyman to help me do the swap. Thank you.

I need someone to: 1) remove old kitchen bench (I can dispose of it); 2)do the carpentry for the new kitchen benches (cut in the sink and oven); 3)install the two new longer kitchen benches and new side panel (the existing kitchen bench is shorter and does not sit over the new dishwasher) 4) install a wall mounted cabinet above my fridge 5) remove existing wall mounted shelf above my bench; 6) install 2 x new wall mounted shelves above kitchen bench The sizes: - kitchen bench across the stove area is 186cm long, 60cm deep (2.8 cm thick) - kitchen bench across the sink and dishwaster is 246cm long, 60 cm deep (2.8 thick) - wall mounted cabinet above fridge is 60cm wide, 42 cm tall, 38 cm deep - wall mounted shelf above bench is 60 cm wide, 42 cm tall, 38 cm deep (there is two, I need one to sit above the other so the combined height will be 84 cm tall), there is enough space to avoid drilling into the spot the existing shelf was installed) Unsure of the value of this job - happy to negotiate better price

We have 6 cupboards that are "push to open" that need fixing. Either springs are missing, or they aren't opening or staying closed properly.