Find experienced local carpenters in Braddon

I’m replacing my oven and I need to lower my new oven in existing cabinet by 10mm. Can use existing wood which would need to be cut and then to be the new slats for oven and secured in place. Front of oven cabinet needs to be lowered and sanded. I also have a bench top that has a little wobble that I want secured. Can be done as soon as possible but I’m flexible. - Due date: Flexible

I need a door delivered (within Canberra) and installed. I can arrange a door supplier, but also happy if you prefer to do this. It is an external door on a storage room off a second floor balcony. A standard 2040x820x35 door but needs to be trimmed to 2034x813x35 to fit. - Due date: Before Friday, 27 January 2023

Coat a clear stain on top of 1.2M diameter timber table - Due date: Flexible

I am looking for someone to build us a dog ramp for two sets of stairs inside and one outside. The inside the stairs are pictured. I have also added some images of what I am looking for. The outdoor stairs are quite small (3 steps) I am looking for someone to build and source all the materials, We would like the ramp to be black, white, charcoal or japan black stain. Please send me a message or leave comments for any questions. - Due date: Flexible

DIY resin dining table 180x120 slab on steel legs from bunnings. slab to heavy for legs i think and results in "racking" (wobbling in one direction) would like someone with carpentry experiance to offer sollutions or alternativly fabricate legs/frame that wont wobble and help attach it. After just advice first. - Due date: Flexible

I have an Ikea Eckbacken laminate bench top (246cm x 63.5cm) that I need cut to approximately 240cm x 42cm. The exact dimensions will need to be measured and marked on the bench top. You will also need a circular saw and an appropriate surface on which to cut the laminate.

New office in Braddon, concrete walls (2 walls roughly 7m long). Each wall needs to have skirting boards installed I need someone to: 1. Investigate and decide on appropriate skirting board 2. Organise the purchase of the skirting board (I will cover costs) as well the appropriate nails/screws etc for concrete 3. Install the skirting board - Due date: Needs to be done on Friday, 22nd Oct 2021

Covid permissions allowing - I am after someone to install two powerpoints at either end of my wooden island bench. There is currently power underneath it for the dishwasher, so I am hoping it may not be too hard. Location Braddon.

I need someone to install 2 extra rails in my closet you might also had to add wood panels for the extra rail to be screwed on. The date and the price adjust to fill-in the empty space, feel free to quote and I’m needing it as soon as possible, but not urgent so I won’t be paying urgent fee

3 timber shelving frames need to neatly be shortened by 20cm to make them fit. Will involve unscrewing end boards, sawing 4 struts on each unit and rescrewing end board back on. [ 12 cuts in total ] Timber Struts are approx 1cm deep x 3cm thick. Not a hard job, but does need to be done neatly and accurately.

I have a draw dishwasher that won't fit as the internal panels need to be removed. Willy, if you see this ad, please contact me asap. Unfortunately I haven't been able to get in contact with you.

I have a large melamine cabinet that need to be cut down in height so it can fit in my new apartment. Approx 300mm to be cut off. Then reassembled. Unit is currently empty

im ordering a handi-mate shed from stratco, 2.21 m wide1.55 deep and 1.9 high to install in car park space for unit I own in Braddon, including flooring. Body corporate allows small shed and there are many installed. Concrete floor is flat and dry. It may not be delivered in 2-5 days promised as its xmas

As an isolation project I bought some timber to put together a set of shelves. Unfortunately I feel I probably don't have the tools to complete the job and was seeking someone to complete it for me.

Hi there I am considering getting an integrated dishwasher that requires a cabinetry door to be made for it. I’m not sure how much this would cost so before I commit I am looking to get quotes on how much it might cost me :) Thanks! Morgyn

My desk is a standard 2040x820x32mm unpainted door, sitting at both sides on Ikea drawers. The setup is just a bit too high to be comfortable, so I'd like a 1140x400 rectangular section cut out of the front, then a piece of melamine/ply attached to the bottom of the door, where the new gap is. Just something smooth and white like a desk. This new area will be my work surface - so now I'm basically working at the lowest height of my desk, not the highest. The 32mm that this gets me is just what I need. (I've tested this by clamping a piece of ply to the front of my desk, at the bottom. So it sticks out and looks ridiculous, but from a height perspective it's perfect. It's this temporary solution that I would like to make permanent.) I've got a drawing if that isn't clear but it doesn't look like I can attach it here. I'd like a quote for the full job, please: - I'll make the door ready. - I can help you move the door out on to the front garden so we don't make a mess. - Cut the hole. - Tidy the edges, which I'd like some sort of edging on so they're not just exposed wood. - Please supply the melamine for the new area, which I'd like at least 10mm thick for stability and will need to be approx 1340x500 to allow an overlap with the new hole. - And lots of screws or whatever is used to attach ply to door. I'm going to be leaning on this as I write and type, it needs to be proper secure. Happy to pay the right price for a good job, I work on this thing all day and need it to be right. Cost isn't my priority. Thanks very much.

I need a frame built to provide cover for the top, sides and back of my bedhead. Ideally in oak or similar. The dimensions are approx 300h x 160w x 10d - which would need to be encased. Materials not supplied.

I need a qualified cabinet maker to assist me with a kitchen refurb

Looking at getting concrete floor bases installed on existing grassed area for 2 x sheds in Braddon. The sheds are https://www.bunnings.com.au/absco-sheds-3-x-3-x-2-06m-premier-double-door-shed-monument_p0084389 Please itemise your quote per concrete base per shed. And your price to assemble each of these sheds as well and secure to concrete bases. Hoping to get the work done during the next week or so. Thank you

Job 1 Install oven & induction cooktop replacing existing ovn & ceramic cktp Existing Fisher & Paykel: • Ovn: BI602HNS • Cktp: CT560CSS Can send photos: • Current cktp & ovn general pos • Width of cktp cut-out • Depth of cktp cut-out • Cktp model & electrical diagrm • Ovn placement • Apartmt fuse box Fuse box approx 3-4 metres from equip round corner in hall Replacement Whirlpool: • Oven: AKZ97820IXAUS; 60cm • Cooktop: SMP658CNEIXL; 65cm Details and installation specs are available on the Whirlpool website.