Find a professional Villaboard contractor in Blacktown

Fill in a short form and get free quotes for local Villaboard contractors in Blacktown

4.2

Great rating - 4.2/5 (11114+ reviews)

Get help from a local villaboard installer

  • Bathroom walls
  • Waterproofing
  • Painted villaboards
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated Villaboard installers near me

Recent Villaboard Installation reviews in Blacktown

Fernando was very polite and communicated well. He was also flexible in changing the date for the job more than once for us. He actually did more work than the original job quote and his attention to detail was very well received. We would definitely recommend him and we'll be getting him back for more work. Great job mate!

Plastering set villaboard/ cornice

$200

Surinder is very hard working nice guy. Highly recommend him

Removal of floor tiles and installation of villa board in bathroom

$800

Done an awesome job setting a bathroom for me will differently use him again!

Need Gyprocker to set villaboard walls in bathroom and repair ceiling

$400

What's the average cost of a Villaboard installer in Blacktown

$478 - $847

low

$478

median

$644

high

$847

Low, median and high bar chart distribuiton

Average reviews for Villaboard Installation Services in Blacktown

based on 3 reviews

5

3
0
0
0
0

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

What does a Villaboard installation include?

Your installer can help with every step from advice on the best materials through to the actual Villaboard installation. Here’s what you can expect:


Villaboard wall installation

Your installation professional will start by helping you choose the right type of Villaboard sheeting. 6mm is standard for residential applications, while commercial applications usually use 9mm or 12mm in heavy-duty situations. If your existing wall sheeting needs removal, they’ll assist with this, but otherwise, they’ll get straight into measuring the space to determine the best placement for your Villaboard installation. Your installer will add internal angles into any corners before they start. They’ll work from ceiling to floor, so they’ll need to start by installing a nail ledge on the joist to rest the top sheets on. Lifting and installing Villaboard is a two-person job because they’re very heavy materials. They’ll rest the panel on the nail ledge, slide it into place, and nail it into the studs. Once the top row is installed, your installer will add the bottom row, staggering the sheets to avoid floor to ceiling join lines. If a panel needs holes for electricals or plumbing, your technician will mark and cut these holes before installing. If they need to cut smaller pieces, they’ll use a special cutter to cut the board down to size. Your installer will continue working until all gaps are covered. Finally, they’ll patch up any joints and nail holes by applying coats of compound and paper tape, smoothing the surface as they go.


Villaboard ceiling installation

Installing Villaboard ceilings is a similar process. Your installer will use both nails and adhesive to secure your staggered sheeting to the framing. Once both your ceilings and walls are installed, they’ll finish off the joints and corners and cover up nail holes with compound. Then they’ll install regular plaster cornices using adhesive and setting compound.


Villaboard repairs

Villaboard is a tough material but it can sometimes need repairing, especially if you’ve removed tiles from the surface during a renovation. If it’s a very small hole, crack, or scratch, your technician may be able to use compound to patch the surface. But if it’s a larger hole, your technician will cut around it to make a clean shape, then they’ll cut a matching shape from wood to fit into the hole. They’ll secure this with stud adhesive and screws before covering the surface of the wood with gyprock compound. Once dry, they’ll sand this back to smooth, vacuum away the dust and apply a thin topcoat of compound. Finally, they’ll sand once again and it’ll be ready to paint. 

Recent Villaboard Installation tasks in Blacktown

Handyman - small multi tasks (villaboard, blueboard, plaster etc)

$350

Seven Hills NSW 2147, Australia

22nd Feb 2026

Multi tasker handyman required. Require some plastering on crack (add support wood), trim on gyprock, some gap plaster, villaboard small amount on eaves, some trims around eaves, blueboard cut small piece and stick and screw more in one's in wall.already, pack out fron door wood, under door gap thing screw on, magnet stoppers x 2, pack and cover gap between 1 window and gyprock, small little things. Install man whole, screw in 2 x hand towl rail, 2 x toilet holder. Small little jobs around the house. I pay material may need pick up. Day rate only.

Villaboards to be repaired in the Alfresco ceiling

$500

The Ponds NSW 2769, Australia

18th Feb 2026

Hi, I’m looking for a quote to repair or replace the Villaboards/fibre‑cement boards on my alfresco ceiling in The Ponds. One of the boards is cracked, sagging, and another board has come out of alignment and some of the nails have dropped down. There is no water damage — it appears to be an installation or fixing issue. I’m hoping to have the damaged sheets removed and reinstalled with the correct FC screws and proper support. The house was built in 2011/2012. Could you please advise availability for an inspection and provide an estimate? Thank you.

Need to supply and install villaboard in laundry

$800

Lethbridge Park NSW, Australia

13th Feb 2026

I have laundry room 1.9x 1.9M I need supply and install 10mm plasterboard for ceiling 6mm villaboard for walls *plastering (square set finish) *sanding and ready for painting

Villa board patch with noggen

$400

Quakers Hill NSW, Australia

12th Feb 2026

Cut out piece needing repair today

Outside Villa board

$11

Marsden Park NSW 2765, Australia

23rd Nov 2025

Outside balcony wall is crack need to replace

Need Villaboard patched up

$5

Toongabbie NSW, Australia

30th Sep 2025

Need these holes patched up ready for my tiler to close up

Bathroom villaboard - fill gaps

$5

Rooty Hill, New South Wales

3rd Dec 2024

Need the gaps at the top of the bathroom walls to be filled with villaboard

Remove villa board and put in a different room

$5

Blacktown NSW, Australia

27th Oct 2024

Have villa board in the laundry that needs to be pulled down and put into a different room 5m away. No need to take off site

Need Gyprocker to set villaboard walls in bathroom and repair ceiling

$400

Glenwood NSW, Australia

11th Aug 2024

I need a Gyprocker to set villaboard walls we have installed making it ready for tiling, ceiling needs to be patched and repaired for tiles to go to ceiling. Must do a neat and clean job.

Done an awesome job setting a bathroom for me will differently use him again!

Bathroom villa board installation in the laundry room

$5

Seven Hills NSW, Australia

18th Oct 2023

Converting laundry to bathroom. Bathroom to be lined with villa board. possible 22 square meters Size 1.8m * 2mand height 2.4m - Due date: Flexible

Plastering set villaboard/ cornice

$200

Kings Park NSW 2148, Australia

11th Sep 2023

Set villaboard and cornice in bathroom 2700 x 2300 - Due date: Needs to be done on Monday, 18 September 2023

Fernando was very polite and communicated well. He was also flexible in changing the date for the job more than once for us. He actually did more work than the original job quote and his attention to detail was very well received. We would definitely recommend him and we'll be getting him back for more work. Great job mate!

Replace villa board on the ceiling under the veranda

$250

Marayong NSW, Australia

21st Feb 2023

Replace missing Villa Board and timber supports under front Veranda - Due date: Flexible

Install villaboard, prepare and paint steel beams

$230

Blacktown NSW, Australia

1st Nov 2022

Need either handyman or carpenter to install villaboard in ensuite plus prepare and paint steel beams for sub floor - Due date: Before Thursday, 3 November 2022

Pipe leak repaired. 4 white tiles and villaboard wall sheet to fix.

$150

Stanhope Gardens NSW 2768, Australia

15th Oct 2022

Pipe leak was repaired and 2 (300mmx600mm) white tiles and 2 (300mmx100mm) white tiles and villaboard wall sheet to be fixed. - Due date: Flexible

Small Villaboard and Tiling (3 wall tiles) work in the bathroom

$350

Quakers Hill NSW, Australia

23rd Sep 2022

I need some help from a previous incomplete job. Plumber had to remove 3 x wall tiles (300 x 600mm) to fix plumbing. I need someone to put the villa board there, put the wall tiles on top and seal it up. Total width: 102cm Height: 32cm I already have the tiles which might require cutting. Happy to pay for villa board or can buy. 2nd job is to install a D-bar (half circle) to stop some water flowing outside the shower area. Already have the bar which needs to be added on the floor using silicone. 3rd job is to install 2 x towel rails and a shower caddy. All pictures attached. Feel free to ask any questions. Prefer to get it done by a single person in one go. - Due date: Flexible

Removal of floor tiles and installation of villa board in bathroom

$800

Quakers Hill NSW, Australia

20th Jun 2022

I am renovating toilet and need to remove floor tiles and need to put back villa borad(blue board) after the plumbing work is completed. Might involve some gyprock patching on the roof. - Due date: Flexible

Surinder is very hard working nice guy. Highly recommend him