Find a local timber flooring profesional in North East Melbourne

Hi, I’m looking for an experienced timber flooring specialist to repair several damaged areas of my wooden floor. There are deep scratches, black marks, and areas where the protective finish has worn off. I would like these areas repaired, with colour matching and refinishing where necessary, to make the floor look as close to its original condition as possible. I prefer a localised repair rather than sanding or replacing the entire floor. Please see the attached photos and provide your best affordable quote, including materials and labour.

Timber floor repair – plugs, inserts, sanding & colour matching Location: Ivanhoe, VIC Budget: $500 - open to reasonable offers based on the required work. Looking for an experienced timber flooring specialist to repair and restore the section of wooden flooring shown in the attached photo. There are several holes, damaged sections, and black and white patches. Work required: * Repair holes using matching solid timber plugs. * Fit matching timber inserts into gaps and damaged sections where appropriate. * Sand the affected area and treat staining as needed to remove or minimise the black and white patches. * Colour match and refinish the repaired area to blend as closely as possible with the surrounding floor’s colour and sheen. Looking for a neat, durable repair with careful attention to matching the existing timber and finish. Please advise whether the staining can be removed through sanding or requires additional treatment or replacement timber. Please include all labour, materials, equipment and finishing in your offer, along with your availability and photos of similar repairs you’ve completed.

I am seeking a qualified vinyl flooring installer to replace the bathroom floor and repair water-damaged subfloor timbers. The bathroom currently has vinyl flooring with a long-standing crack that has allowed water ingress, causing damage to at least one timber near the waste outlet. The house is on stumps, providing access underneath the floor. Scope of Works * Remove and dispose of existing vinyl flooring and all related waste.
 * Remove and reinstall the shower screen after the new flooring is installed.
 * Leave the vanity in place where possible. Removal is only required if necessary to repair damaged timbers beneath it (unlikely and not to be included in the quote).
 * Inspect and repair/replace damaged subfloor timber(s). Based on my inspection and photos, at least one timber requires repair.
 * Supply and install 5mm exterior-grade underlay plywood.
 * Supply and install commercial/industrial-grade vinyl flooring.
 * Cut and fit vinyl neatly around the existing vanity.
 * Install vinyl cove/skirting to match the current layout.
 * Reinstall the shower screen.
 * Ensure the completed installation is fully watertight.
 Measurements * Total floor area: approximately 3.84m² including vinyl cove/skirting rising approximately 120-130mm up the wall. Total wall length for cove/skirting: approximately 4.9m.
 * Refer to attached photos for dimensions.
 Additional Information Photos are attached showing the damage discovered after I cut away a small section of vinyl near the crack. The area has been temporarily patched to allow continued use of the shower until repairs are completed. This is a rental property. I am looking for a contractor who can complete both the flooring replacement and timber repairs. Please provide your quote, any assumptions, and an estimated timeframe for completion. Thank you.

Sand down decking and stained

I have a laminate floating floor in my apartment where a few boards near the bathroom door have separated, leaving visible gaps. The paint at the base of the door frame is also chipped and peeling. I’m preparing the apartment for sale and want it to look clean and seamless. Looking for someone to: Tap the separated boards back together and close the gaps Trim the base of the door frame if the floor is pinched, so it doesn’t separate again Fill any remaining small gaps with colour-matched laminate filler If a board needs replacing, swap one from a hidden area (e.g. a wardrobe) so it matches. There are no spare boards The apartment is vacant and access is through my real estate agent, as I’m overseas. Photos attached. Please include photos of similar work.

Hi, I have an alfresco timber floor that’s quite discoloured. I’m looking for someone to lightly sand it back and refinish/polish it. Could you please give me a rough quote?

Hi , I need some 90x19mm Merbau boards replaced at my place in Doreen (around 9- 10 boards total, 2m to 2.7m long). The main broken section needs 5 boards replaced, and there are about 4 to 5 other cracked boards in different spots that need swapping out too. Also, the joist under the main section needs a bit of sistering/reinforcing (about 30-40cm). My budget is $500 to cover everything, supplying and installation Photos are attached. Cheers

1. We will require : a. Police Clearance Certificate to be provided b. Working with children certificate to be provided c. Company and Personnel Credentials 2. The Project : Timber Deck rejuvination * Approximate area 40-50 SQM Area * High Pressure Cleaning - Sanding - Remove any protruding Nails - Stain/Oil Coating : professional job 3. Price all inclusive including AirTasker Fees is $ 2000.00 4. Pictures pending - will be uploaded shortly 5. Companies / project personnel must be professional, experienced in providing the service

Looking for someone to stain three timber decks at a property in Hurstbridge. The decks have just been professionally cleaned with stripping chemicals, so they should be ready to stain. I'd like you to supply the stain as well as the labour — please include materials in your offer and tell me what product you plan to use. About the photos: two of the three decks are shown as they are now, straight after the clean. The rear deck photo is an old one — I'll swap it for a current shot next time I'm at the house. I've also attached a photo of the front decks after their last stain so you can see the colour and finish I'm after. I'm having trouble getting offical measurements, but I can head out to verify before we agree on the final price. My estimate is 60m2. In the mean time, I've picked an arbitrary budget. There's a key lock box at the property, so you can let yourself in and out — no need to coordinate with me on the day. The house will be empty. Happy to arrange a time for you to take a look before quoting, and to answer any questions.

I require an experienced floor refinisher to sand and polish a timber floor that has been covered by carpet. Approximate area is 20sqm Ground floor, one area only (small kitchen/dining in a unit) Special care is required around skirtings.

Sanding and polishing 3 bedrooms (3mX3m), a lounge room 6.5m X 4.5m and small whole way 4.5m X90cm.

Small deck 1.3m x 1.2m Need to replace the timber boards

The timber floor’s few layers stripped off.

2 x small repairs for engineered timber flooring - pics attached. Today after 3.30pm

Need floating timber flooring repair / board replacement I need an experienced timber flooring specialist to inspect and repair a floating timber floor. Several floorboards have lifted/separated and need to be removed and replaced or reinstalled. The flooring has click-lock joints and I would like the repair to match the existing floor as closely as possible. Please provide a quote for inspection, board replacement (if matching boards are available), and labour. Photos attached.

Needed hardwood timber floor re sanded and varnished approx 12.5 square meters chasing pricing

Water Leak Inspection + Timber Floorboard Repair Needed Hi, I am looking for a licensed and insured restoration professional to attend my property to assess and repair water damage. There is a suspected water leak that has affected timber flooring and may require proper moisture inspection and restoration work.

I need an experienced handyman, carpenter, or deck restoration specialist to repair a circular burn mark on my timber deck (see photo). The damaged area is approximately 40–50 cm in diameter and appears to be surface burn damage from a fire pit or hot object. I’m looking for someone to assess the damage and restore the area so it blends in with the surrounding deck as closely as possible. Potential repair methods may include: • Sanding back the burnt timber • Replacing affected deck boards if required • Colour matching and refinishing the repaired area Please provide: • Experience with deck repairs/restoration • Your proposed repair method • Photos of similar repairs if available • Quote including labour and materials Photo attached.

We sanded our floors and now have to sand back the railings in our stairs. We plan on painting them white. We are in Eltham

Hallway carpet needs to be ripped up and timber laid as dogs have ruined it during the colder/wet months. Area is approx 15m2. Timber and tools would need to be provided as nothing at house.