Hire reputable rangehood installation and ducting services in WA

Hi, we have already removed existing rangehood, requires new exhaust flue plus need you to re-route it to a new outlet outside, we don't like it going into the roof space we need you to do that for us , it has existing power point, please see photos attached

Licensed electrician needed to replace hardwired Blanco BRU70X-3 (706 W × 283 D × 396 H) with Beko BRH70UX plug-in (700 W × 296 D × 254 H) — new unit already supplied. Scope of work: • Disconnect old unit (currently still in place, filters removed) • Supply & install new GPO • Mount new unit (cabinet cutting shouldn’t be required, screw holes may need adjusting) Details: • Single storey house with roof accessibility • Budget: $275 (negotiable) • Location: Woodvale • Timing: ASAP

Need certified electrician to install 60cm New canopy Range-hood.

Remove Exisitng Rangehood and remove from premises and install new rangehood 60cm in its place. New Rangehood is already onsite. Also remove new cardboard box and any other associated rubbish. Power point already installed in Cupboard above rangehood just plug in.

Need an electrician to remove existing rangehood and install a new similar one

Swap out old 600mm range hood and replace with 900mm range hood. We have bought the new range hood already.

looking to relocate oven, new location in the kitchen (internal wall) single storey oven already disconnected built in extractor hood installation

Install already purchased range hood. All electrical set up to be plugged in

Would like someone to install 90cm canopy rangehood over the stove

Install ranghood, cut roof,electrical and mount to wall, and what else is required

Install a new rangehood/backsplash + possibly a few tiles

Rangehood Install and remove old one

We need someone to install a new Smeg 90cm Canopy Rangehood SA940CXA on or after 5 April 2025 and dispose of the old rangehood. Also it'd be great if you could fix a broken light switch for us, and while you do that we might as well ask you to do a check-up of our home electrical wiring (single-storey house). We haven't done one for a while.

Replace the old canopy with the new one. Remove the old rangehood and install a new one. 60cm

No ducting. Haier 60cm Canopy Rangehood Stainless Steel type. Must be at least 65cm above the stove as per AUS Standards.

2 jobs. 1) cut bench top (stone bench top, likely marble) 3cm off the width to fit my induction cooktop. (Pic 1&2) 2) will need to remove bricks from ceiling +/- reinforce if required to fit my exhaust fan (pic 3-5) to fit in exhaust fan. Does not look like supporting beam

Ensure the range hood cover is installed properly, just needing the top part to be secured

Installation of a 900mm range hood, through the roof and external wall. Will require flu kit.

Wall mounted rangehood installation asap.

Install new rangehood. Old one removed.