Hire reputable rangehood installation and ducting services in Inner West Sydney

Hi. I need an Omega 60cm Brushed Stainless Steel Slide-out Rangehood (model number ORT6WXA) fitting. Old rangehood removed. New rangehood purchased. 240v power supply available. Needs 6x 4mm holes drilling in the right place and the rangehood securing. Unable to do myself as recovering from surgery and cannot hold rangehood in place whilst drilling holes and setting up so it slides open etc. Am flexible on timing but would like the work done in the next few days if possible.

Agrade canopies, Rangehood Flue. Model No: AGF1200PRO. Task requires: AGF Rangehood installation with external roof Mout Motor Supply and Install Metal Flashing Apx 4 m to ensure no leaking through the gaps.

We have purchased the range hood and needed someone to install it.

I recently purchased a integrated rangehood to install in my kitchen above the oven. The older rangehood was a slide out model. I would like the cabinet to be adjusted to allow the newer rangehood to fit in. It will require the bottom shelf (that is fixed) to be removed and to install a new shelf with a cut out for the rangehood to clip onto. New brackets may need to be installed to keep the cabinet box rigid once the bottom shelf is removed (or any other method). https://www.westinghouse.com.au/cooking/rangehoods/wri515sc/

Sloped colorbond alfresco with no wall to install rangehood bracket. Ceiling exposed. Need help with choice of rangehood and installation.

Replace the old one with new one. Fix price $200 for labour Dimensions are in the pictures

90cm Wall Mount Rangehood installation - homebush Photos of old rangehood and outside duct outlet attached, its to be replaced by a new one. New rangehood is similar, 90cm standard size. Not sure about the underneath duct size for the old one. Might need to change to new huse, which is 185mm round, if required. Also, old rangehood to be taken away.

Install a 60cm recirculating slide out rangehood

I have bought a new Westinghouse WRR904SB 90 cm slideout rangehood. I need old rangehood removed and new one installed.

Install Beko rangehood. We’ve had a similar one removed so all power is there. You’ll need to trim about 10mm of the opening as this one is very slightly larger.

We are looking for assistance with the installation of our SMEG Rangehood (KDIAM90AX) in our kitchen. We are looking at fluing it out of our ceiling. So will need assistance with this also. The ultimate plan is to have the rangehood framed around with timber for a plaster cladding. Product Specs: https://www.smeg.com/au/products/KDIAM90AX

My range hood needs to be replaced and I bought a new one (both of them are 70cm) Is there someone else who would like to install the new one?

Install Kleenmaid rangehood to replace exiting. Also, a small timber fascia panel needs trimming to fit under bench at stove top.

BOSCH 60 cm slideout rangehood (DFM064W54A) installation in air recirculation mode. This rangehood needs to replace an old slideout rangehood in a unit. The unit does not have duct to pass the air out of the unit. So, air recirculation mode is the only possibility. I have already purchased the new rangehood. Not sure what else needs to be purchased for the air recirculation mode - suggestion needed on this. Bosch manual says "To bind odours in circulating-air mode, you must install an odour filter. The different options for operating the appliance in circulating-air mode can be found in our catalogue. Alternatively, ask your dealer. The required accessories are available from specialist retailers, from customer service or from the Online Shop."

Installation of a new electric telescopic rangehood (supplied). The width and depth are correct but the height is higher than the previous one so the MDF ventilation flume will need to be shortened and the cupboard shelf raised. Old rangehood has been removed and disposed of. - Due date: Flexible

We require a skilled professional for the installation of a Westinghouse 90cm Fixed Stainless Steel Rangehood. The project entails some carpentry work, as part of our kitchen cabinet must be cut to fit the new rangehood. The specialist will also be responsible for finishing touches, including sanding and repainting any exposed cabinet areas, though this may not be necessary depending on the final installation. - Due date: Before Thursday, 14 December 2023

I want to get a new electric oven (900mm), gas cooktop and rangehood. Need installation and removal of existing.

Beko 90cm rangehood installation - Due date: Before Tuesday, 7 November 2023

Removal of range hood and installation of new range Hood. - Due date: Needs to be done on Friday, 30 June 2023

Need to install a new rangehood - Due date: Flexible