A professional helping with water heater installation and repair.
A professional helping with water heater installation and repair.

Find a professional hot water system contractor in South East Melbourne

Fill in a short form and get free quotes for local hot water system contractors in South East Melbourne

4.2

Great rating - 4.2/5 (11114+ reviews)

Looking for hot water system contractors?

  • Gas system
  • Electric systems
  • Boilers
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated hot water system installers near me

Recent Hot Water System Installation & Repair reviews in South East Melbourne

Thank you for a great job highly recommend

Plumbing hot water system leaks

$300

Job done, satisfied.

Fix leaking hot water

$200

Quick attendance and great job

New gas hot water tank supply and install

$1,500

Dishwasher is working now. Thank you!

Omega dishwasher hot water not working

$100

Awesome guy Very knowledgeable and experienced

Plumber needed to fix supply of hot water to shower

$80

On time and thorough! Thanks Darren :)

Plumber to connect hot water to our bath tub

$300

What's the average cost of a hot water system installer in South East Melbourne

$120 - $250

low

$120

median

$182

high

$250

Low, median and high bar chart distribuiton

Average reviews for Hot Water System Installation & Repair Services in South East Melbourne

based on 169 reviews

4.93

161
6
1
0
1

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

213+

Tasks successfully completed

4

Average amount of offers per task

5

 mins

Average time to receive offers

What do hot water system installation services include?

Hot water system installation services include all the activities necessary to put a reliable, safe hot water system in your home. This involves installing an unvented hot water system, inspecting the installation area, preparing materials, installing the cylinder or tank, then making the needed connections. After the installation, your plumber can test the system for flaws and address them as needed.

Inspecting installation area

Your water heater installation begins with a thorough inspection of the spot that will house the tank and its components. Your plumber makes sure that the floor is robust enough to support the cylinder's weight and complies with established building codes and safety rules and regulations. If the allotted space is deemed insufficient for the cylinder, your plumber can help you look for an alternative spot for the unvented cylinder service. 

Preparing for installation 

Your plumber makes the necessary preparations for the hot water cylinder installation. If necessary, some plumbers may offer to make an improvised platform of sturdy materials to support the tank's weight. Otherwise, you can hire a Tasker to handle all your carpentry needs.

When appropriate, your hired plumber shuts off the power, gas, and water supply before starting the job. They can take all the necessary measurements to determine the right amount of materials, then cuts and bends wires and pipes to the appropriate lengths and widths. Your plumber may also cut holes into walls or floors as needed to allow pipes or wires to run through.

Installing the cylinder

Once the cylinder's space is ready, your plumber can proceed with the unvented hot water cylinder installation. They can place the cylinder or tank onto its designated space and position. Your plumber takes care not to damage any of the components of the vented hot water cylinder or other pipes and wires in its surroundings.

Installing components and pipes

After the cylinder is in position, your specialist proceeds with attaching the appropriate pipes, wires and components like the Temperature and Pressure Release valve, expansion vessel, immersion heater, and any other pipes and valves. As with all other stages of the unvented cylinder installation, they use appropriate materials and techniques that are compliant with state safety and building regulations and industry best practices. 

Testing the system

Your hired plumber tests the system after completing the installation. They check that each tap and shower head provides hot water on demand and flows with consistent pressure. Should variations in temperature or pressure arise, your plumber can troubleshoot the system and do the appropriate fixes. 

They repeat this process until the hot water system works without any issues. And now that your home has hot water running through your taps, tubs, and showers, why not ensure greater warmth and comfort in every room of your home? On Airtasker, you can also hire an insulation installer who can help you cut down on bills and achieve year-round comfort.

Recent Hot Water System Installation & Repair tasks in South East Melbourne

Installation and supply of electric hot water system and replace

$1,800

Clyde North VIC 3978, Australia

7th Aug 2026

Removal of old solar water tank Supply and Replace with new electric hot water

Hot water system make loud sound

$10

Springvale VIC 3171, Australia

5th Aug 2026

Hot water system making loud water sound, turned of the water, no sound now. Looking for someone to look into this. Thanks Location- springvale

Fix hot water in bathroom sink

$100

Pakenham VIC 3810, Australia

5th Aug 2026

Our hot water has stopped working specifically in our bathroom sinks (both ensuite and main bathroom). Not sure exactly what’s causing the issue & need help! Hot water is working for showers, kitchen sink, and laundry sink.

Hot water system- pilot light keeps going out

$170

Clyde VIC 3978, Australia

3rd Aug 2026

I have a Vulcan gas hot water system where the pilot light is going out around 2 times a week, requiring me to manually relight it each time. Looking for a licensed gas fitter/plumber to diagnose the cause (could be thermocouple, thermopile, gas valve, or a draft/ventilation issue) and fix it so it stays lit reliably. Share me a quote 💬

Hot water system pilot not staying alight please read

$10

Chadstone VIC 3148, Australia

2nd Aug 2026

Hi I have a hot water system that control valve needs replacing as pilot light will not stay on if you could do this please let me know. This is what my plumber said on weekend although he has gone away and couldn’t get any parts. ‘’From what I’ve seen, it’s most likely the gas control valve that’s at fault, but it’s still worth trying another genuine thermocouple first as they’re cheap and quick to rule out. If a new thermocouple doesn’t fix it, I’d be looking at replacing the control valve’’

Remove Hot water service, supply and install new one

$2,500

Cranbourne North VIC, Australia

2nd Aug 2026

I need removal of existing hot water service, and replaced/installed

Hot water not working on ensuite sink and main bathroom sink

$200

Cranbourne East VIC 3977, Australia

2nd Aug 2026

Hot water tap running cold water not hot in ensuite and main bathroom tap

Hot water system easy fix all done now done in 15 minutes

Hot water service not staying alight

$10

Chadstone VIC 3148, Australia

31st Jul 2026

Hot water service not staying alight.. have had hot water all day and stopped all of a sudden

Hot water system

$150

Cranbourne East VIC 3977, Australia

29th Jul 2026

My hot water system has gone off not producing any hot water. Unaware of what the exact issue. Could I get a professional to check and advise for repair.Let me know if there is any details that you may need. Thanks.

Great work.Thanks

Replace hot water system

$1,500

Berwick VIC 3806, Australia

26th Jul 2026

Hi, I want to replace a faulty hot water system. It is gas one and open to offers to gas or electric one. It's for my rental property so need it replaced.

Hot water/boiler fix

$10

Keysborough VIC, Australia

11th Jul 2026

I have bosch boiler/hot water unit works randomly,it had same problem so we have fixed the mother board last year, but we found out that water was directly leaking from the roof, so now we have fixed it, so it rrwuires someone to have a look again thanks

Ryan was very punctual and arrived right on time. He came out within a few hours to inspect the job, quickly identified the problem, and fixed it straight away. Excellent service from start to finish. Highly recommend—5-star service!

Licensed plumber Hot Water System Leak(Continuous TPR Valve Discharge)

$150

Noble Park North VIC 3174, Australia

9th Jul 2026

I need a licensed plumber only to inspect and repair my Eco Alliance Eco‑260LE 260L electric hot water system. Problem: Warm water is continuously running from the TPR valve drain line (like a small tap). Leak has been ongoing for 3 weeks. Started same day the water meter was replaced with a digital meter by water company. System age: 5 years. Required Work: Diagnose leak cause, Measure and record mains pressure. Check pressure limiting valve Inspect/test TPR valve. Replace TPR valve if faulty. Documentation Needed: Detailed tax invoice Short written report stating cause of leakRecorded mains pressure (kPa)Keep and return old TPR valve if replaced.

Punctual, reliable and professional

Need plumber to inspect hot water pressure / temperature issue

$150

Glen Waverley VIC 3150, Australia

3rd Jul 2026

Hot water temperature too low + drops when other taps are used We’re having an issue with our hot water system and would like a plumber to inspect it. When someone is showering upstairs, if another person uses hot water downstairs (for example, washing dishes or washing hands), the shower upstairs suddenly becomes very cold. The temperature drop is significant enough that it’s difficult to continue showering. We’d like someone to inspect the hot water system and plumbing to determine what’s causing the issue and recommend the best solution. If repairs are required, we’d be happy to discuss a quote after the inspection. Please let us know your availability and any call-out fees. We’ve attached photos of our hot water system in case they’re helpful. Thanks!

Nick was very professional and easy to work with, solve the issue very quickly, highly recommend!

Hot Water Not Working – No Water Flow from Any Hot Taps

$50

Clarinda VIC 3169澳大利亚

24th Jun 2026

My hot water system stopped working suddenly. Vulcan gas storage hot water system Cold water is working normally throughout the house No water comes out from any hot water tap (kitchen, bathroom, shower etc.) Hot water was working normally yesterday Today there is zero flow from all hot water outlets No unusual noise from the hot water unit when hot taps are turned on Suspected issue may be a tempering valve, non-return valve, or hot water supply valve fault, but diagnosis is required. Looking for a licensed plumber to inspect and repair as soon as possible

Excellent service. Great communication from start to finish, responded quickly and arrived promptly. Diagnosed and fixed the hot water issue efficiently with no fuss. Friendly, professional and easy to deal with. Highly recommend and would happily use again. Thanks for the great work!

Plumber required to fix the hot water tap in the bathroom wash basin.

$100

Pakenham VIC 3810, Australia

4th Jun 2026

Hot water tap of the wash basin not working in Pakenham Lakeside property. The valve needs to be replaced by a plumber.

Very good Service. Thank you…

Gas hot water heater thermocouple replacement

$100

Clayton VIC 3168, Australia

23rd May 2026

Aquamax 390 hot water heater pilot lights but extinguishes as soon as pilot button let go. Suspect thermocouple faulty.

Jordan was to respond and come on site in Clayton. He was going to just check the thermocouple but ended up popping down to Reece to get a control valve, which originally was going to be the day after. Thanks so much for squeezing it all in today!

Quote For Hot Water Replacement

$50

Narre Warren VIC, Australia

20th Apr 2026

Need a qualified plumber to supply and install a new Rheem 20 hot water unit. Pls see pic for more details.

Great communication and easy to deal with. Thanks again..

Hot Water System Leaking

$100

Clayton South VIC, Australia

13th Apr 2026

Fix a small leak from my hot water system. Brand: Eco Alliance DynaHeat Issue: Small continuous dripping from the relief valve pipe (PTR valve) Location: Outdoor unit Seems to be a constant slow drip

Job done quickly. Thank

Fix hot water unit, pilot flame not staying on.

$199

Dandenong South VIC 3175, Australia

14th Mar 2026

Fix hot water unit, pilot flame not staying on. Tried to ignite and pilot.light comes on but not staying on after let go of pilot knob. No sign of moist.

Excellent service very prompt professional knows exactly what they're doing we're definitely come back again

Hot Water leak on roof. Need repair

$200

Mulgrave VIC 3170, Australia

9th Feb 2026

Hi, Please see attached. Hot water system leaking on roof. Need repair

Thank you Travis. Much appreciated the help