Find an experienced handyman in Bella Vista

External rendered walls showing rising damp / salt attack. Both AC side (turf side) AND pool coping side. Paint peeling 300-400mm up from ground, 12-15 linear metres total + 1 vertical crack with bricks exposed. Indicative SCOPE: 1. Remove all loose / drummy render (knock test) 2. Salt wash with anti-efflorescence wash, dry 24h 3. Pull back turf 50mm from wall, clear weep holes / check drainage flows away from wall 4. Re-render 5-6m2 (400mm high) with WATERPROOF render (Davco Sanitop or similar) + 100mm mesh over vertical crack 5. 5mm gap at bottom sealed with PU sealant (not silicone) 6. 1 coat sealer primer (Acratex) + 2 coats Weathershield Vivid White (behind downpipe too) 7. Seal coping tile to wall joint 8. Cleanup — no paint on turf / tiles / deck MUST HAVE:* - Experience with salt damp / Hills District render - ABN / licence (renderer / waterproofing / painter) *TO QUOTE, PLEASE REPLY WITH:* 1. Do you do salt wash + waterproof render + sealer (not just paint over)? Provide labour (fixed) and material (estimate) costs for full job and clean up of rubbish etc. Budget includes labour and materials!

Removing current corkboard and installing a whiteboard on wall

Wall mounting / Installation service required for Framed Wall Art Weight : 10kg Height : 122cm Width : 203cm Depth : 5.5cm Address : Lindenwood, Bella Vista, NSW 2153

Our current office blinds are broken, we are unable to roll it up, and the pull cord is detached from its place. Unsure what the actual issue is but need it repaired.

I need gyprocking and sheeting for 6 full rooms 3/3 with each having recessed 3 sides of ceiling for LEDs in Bella Vista.

I need a shed installation 3.0 x.78. Easy shed.shed is available now ready to install.

My treadmill had stopped working. Techno Gym commercial treadmill has died and won’t start

I have an office table as per the photos. There were 2 x triangular brackets that are now missing. I need a way to secure the table to the outside grey shell. I need the 2 x brackets and for someone to screw it on. Simple job if you have the right part.

I need a basic internal office door supplied and installed. The job includes: • Supplying a standard internal door • Fitting a basic handle with no lock • Installing the door into the existing doorway • Painting the door white • Leaving the area clean and tidy Please include all labour, materials, fittings and paint in your offer. Please also confirm your availability and whether you have experience installing internal doors. See photos attached For dimensions

Gyprock repair work with paint in bbq area

Experience with mounting monitors and cable management is essential. Stud finder required for installing whiteboards. I have two whiteboards, one is new and the other is on a wall needing to move to the adjacent wall. I have a desky sit and stand table I need assistance with attached parts below Photos of the cable management parts, Here are links to familiarise with the installation: Desky Quad Arm https://desky.com.au/products/quad-monitor-arm?variant=35162546536604 > Installation manual shown in pictures for this task: this will require drilling a hole into the desk rather than just using the clamp Desky Cable Channel https://desky.com.au/products/intergrated-cable-data-channel?variant=35164152135836 Desky Plugin Powerboard x 4 https://desky.com.au/products/power-board?variant=43525282824348 Desky Minimal Under Desk Draw https://desky.com.au/products/minimal-under-desk-drawer?variant=40593893163164 Install video https://youtu.be/m_0ZJAIkF-c?si=WalMuU9XCmxb1Qk2 Here's a video for desky cable management https://youtu.be/GsKUKCGnbBU?si=X3XSwlVzLQOI-IeE Please advise days available, thank you

Looku g for a handy man to hang the wall painting and install heating hanger for towels in the bathroom

I need an internal Office door supply and installed. It doesn’t need a lock just a handle to open and close it and just a basic door. I’ve attached photos of the location where the door needs to be installed in a similar door of similar dimensions installed next to it.

We need to add soundcheck on existing wall. It is about 4.5 m wide and 3 meters high. There is power point on the wall.

I have 8 furnitures to be assembled and placed inside my house; they are flat packed inside the box now. Also, I need to put some pins/nails on the wall to hang some pictures and a large mirror. I have 8 items /pictures and 1 mirror to be hung on the walls.

Old board needs to removal, new fc board installed and painted. Roof leak will be fixed by roofer. Also garage have two gyprock need to fixed.

The roller blinds are not opening.

Hi there! We need an experienced handyman to hang 7 medium-sized/large paintings at a medical clinic. They are required to bring in their own tools, measure accurately to ensure everything is level, and work carefully in a professional environment without damaging walls.

A door handle is falling off and needs to be replaced. I have a one with a lock from Bunnings that I'd like it to be switched out with.

Had to fix minor leak for which the plumber had to cut the ceiling to replace pipe. It's about 600x300. Need to repair, sand and paint the patched area